Dilhan Kalyon (dkalyon)

Dilhan Kalyon

Professor

Charles V. Schaefer, Jr. School of Engineering and Science

Department of Chemical Engineering and Materials Science

McLean Hall 401
(201) 216-5203

Education

  • PhD (1980) McGill University (Chemical Engineering)
  • ME (1977) McGill University (Chemical Engineering)
  • BE (1975) Middle East Technical University (Chemical Engineering)

Research

Professor Kalyon’s expertise is in the rheology, simulation and processing of complex fluids including polymers, biopolymers, and energetic, ceramic, magnetic and composite materials processed using extrusion, molding and coating techniques, especially involving suspensions filled with rigid particles at concentrations which approach their maximum packing fraction. His research is multi-disciplinary in nature and integrates mathematical modeling, experimental studies using industrial-scale processing equipment, and analysis of microstructural distributions and ultimate properties of processed articles.

Professor Kalyon and his co-workers have developed various comprehensive technologies in the areas of novel biomaterials, new methods of fabrication of functionally-graded tissue engineering scaffolds, disposal of very toxic chemicals, mitigation of EMF, mixing, rheology and wall slip of complex fluids, including polymers, gels and various viscoplastic fluids, and microstructural analysis of concentrated suspensions. The developments include processable magnetic composites with high relative permeability and means of magnetic shielding, disposal methods for medical waste and highly toxic chemicals, materials and processes for on-site molding of replacements for cranial bones removed during neurosurgery, new method for manufacturing of nanofibers with nanoparticles, functionally-graded tissue engineering constructs including bone graft substitutes for arthrodesis, x-ray diffraction based characterization methods for the particle size distribution of crystalline solids, novel foodstuffs and methods of manufacturing them, new methods of manufacturing of energetic materials with desired structural distributions, novel intumescent materials, nanocomposites with carbon nanotubes and method for the control of rheology and injectability of ceramic bone cement precursors. Some of these developments are patented, and some are being pursued by Stevens as new patents and opportunities for commercialization.

General Information

Dr. Dilhan M. Kalyon is VP of Research and Innovation, Institute Professor and the Director of the Highly Filled Materials Institute at Stevens Institute of Technology. He obtained his MEng and PhD degrees in chemical engineering from McGill University in Canada, in 1977 and 1980, respectively and his BEng degree from METU in Ankara in 1975. Upon graduation from McGill he joined Stevens Institute of Technology, where he has served at the International Programs Office (1980-1984), and at the Departments of Chemistry and Chemical Engineering, Chemical, Biomedical and Materials Engineering and Chemical Engineering and Materials Science as an Assistant Professor (1984-1987), Associate Professor (1987-1990), Professor (1990-1999), Institute Professor (1999-), Joint Affiliate Professor of Biomedical Engineering and the Founding Director of Highly Filled Materials Institute (1989-).

Institutional Service

  • Highly Filled Materials Institute Chair

Honors and Awards

Prof. Kalyon has received the Thomas Baron award in fluid-particle systems of the American Institute of Chemical Engineers (2008), the International Research award of Society of Plastics Engineers (2008), the Harvey N. Davis Distinguished Teaching Assistant Professor award (1987), Exemplary Research Award (1992), Henry Morton Distinguished Teaching Full Professor award (2000), Honorary M. Eng. degree, honoris causa (1994), the Davis Memorial award for Research Excellence (2009) and the Faculty Appreciation award (2017) from Stevens Institute of Technology, the Founder’s award of JOCG Continuous Extrusion and Mixing Group (2004), and various fellowships including DuPont Central Research and Development Fellowship (1997), Exxon Education Foundation Fellowship (1990) and Unilever Education Fellowship (1991). He was elected Fellow of the Society of Plastics Engineers (2004) and Fellow of American Institute of Chemical Engineering (2006).

Professional Societies

  • Society of Rheology Member
  • AICHE – American Institute of Chemical Engineering Fellow
  • SPE – Society of Plastics Engineers Fellow

Patents and Inventions

Professor Kalyon and his co-workers have developed various comprehensive technologies in the areas of disposal of very toxic liquids, mitigation of EMF, mixing, on-line rheology and microstructural analysis of suspensions including their degree of mixedness, novel materials including processable magnetic composites with high relative permeability, materials and processes for on-site molding of replacements for cranial bones removed during neurosurgery, recycling and reuse of energetic materials, particle size distribution of crystalline solids using x-ray techniques, a safe disposal technique for medical waste, new methods for the fabrication of nanocomposites, novel scaffolds for use in the tissue engineering area, three separate methods for the fabrication of graded scaffolds for use in regenerative medicine, a reactive processing methods for lignin removal from cellulosic biomass, a multizonal bioresorbable cage/core bone graft substitute device for arthrodesis, and intumescent coatings with better fire retardance. Some of these developments are patented, and some are being pursued by Stevens as new patents and opportunities for commercialization.

S. Lee, J. He and D. Kalyon, “Methods for producing polymer gels and uses thereof”, US Patent 10883003 B2, January 5, 2021.

E. Sahin and D. Kalyon, “Preseharing method for the control of the rheology and the injectability of aqueous inorganic cements”, US Patent Application, US 2021/053345 A1, November 18, 2021.

Rebecca Chung, Antonio Valdevit, and Dilhan M. Kalyon, “3D Printed Trans-modular Scaffolds for Grafting Applications in Segmental Bone Defects”, US patent 10,631,987 B2, April 28, 2020.

Filippos Tourlomousis, Robert C. Chang and Dilhan M. Kalyon, “Integrated Methods for Precision Manufacturing of Tissue Engineering Scaffolds”, non-provisional Patent Application No. US 2019/0106674 A1 dated April 11, 2019, accepted.

Stephanie S. Lee, Jing He and Dilhan M. Kalyon, “New processing method for fabrication of organic solar cells with improved efficiencies and lower costs”, notice of invention submitted to Stevens Institute of Technology, August 29, 2018.

Sally Shady and Dilhan M. Kalyon, “Functionally graded meshes containing aloe vera and various drugs for the treatment of wounds.”, notice of invention submitted to Stevens Institute of Technology, August 21, 2018.

Sally Shady and Dilhan M. Kalyon, “Novel nanofibrous membranes containing aloe vera primarily for cosmetic and wound care applications”, notice of invention submitted to Stevens Institute of Technology, June 28, 2018.

Filippos Tourlomousis, Robert C. Chang and Dilhan M. Kalyon, “Integrated Methods for Precision Manufacturing of Tissue Engineering Scaffolds”, US Provisional Patent Application No. 62/545,527 filed on August 15, 2017.

Erdem Sahin and Dilhan Kalyon, “Preshearing method and apparatus for the control of the rheology and the injectability of aqueous cement suspensions for bone repair and regeneration”, US Provisional patent application serial No: 62/299,271, filing date: February 24, 2016.

Rebecca Chung, Dilhan Kalyon, Antonio Valdevit, “Dual Modulus Scaffold Designs for Bone Graft Incorporation and Stability”, notice of invention submitted to Stevens Institute of Technology (2015).

D. Kalyon, H. Tutar-Kahraman, H. Gevgilili, “Novel fire retardant materials and their method of manufacture for fabrication of protective clothing”, notice of invention submitted to Stevens Institute of Technology (2013).

S. Senturk, H. Gevgilili and D. Kalyon, “Pretreatment Method of Cellulosic Biomass via Flowability Control and Reactive Extrusion Process”, US patent application publication, 2012/0205059A1, August 16, 2012.

A. Ergun, D. Kalyon, H. Gevgilili, A. Valdevit, A. Ritter, “Integrated multi-zonal bioresorbable cage/core devices as bone graft substitutes and apparatus and method of fabrication of such cage/core devices”, US patent application publication US 2012/0150299 A1, June 14, 2012.

D. Fair, D. Kalyon, S. Moy and L. Manole, “Cross-sectional functionally-graded Propellants and Method of Manufacture”, US Patent # 7,896,989 issued on March 1, 2011.

M. Wazne, D. Dermatas, D. Kalyon, X. Meng, M. Kauris and J. Morris, “Method of Treatment, Stabilization, and Heave Control for Chromite Ore Processing Residues (COPR) and Chromium Contaminated Soils”, US patent # 7,452,163 issued on November 18, 2008.

D. Kalyon, J. Kowalczyk and H. Gevgilili, “Screw Extrusion Electrospinning Process (SEEP)”, invention disclosure submitted to Stevens Institute of Technology, September (2006).

S. Ozkan, D. Kalyon and X. Yu, “Apparatus and method to manufacture three-dimensional functionally-graded scaffolds for tissue engineering applications using extrusion and co-extrusion”, invention disclosure submitted to Stevens Institute of Technology, September (2006).

D. Kalyon, C. Erisken and H. Wang, “Apparatus and method to manufacture three dimensional functionally-graded scaffolds for tissue engineering applications using screw extrusion electrospinning process”, invention disclosure submitted to Stevens Institute of Technology, September (2006).

R. Yazici and D. M. Kalyon, "Method and Apparatus for x-ray Analysis of Particle Size" U.S. Patent, #6,751,287 (1999).
D. Kalyon and R. Yazici, “Method and apparatus for x-ray analysis of particle size (XAPS), International application, WO 99/60388 (1999).

D. Kalyon, “Method and Apparatus for the Manufacture of Food Products”, notice of invention submitted to Stevens May 21, 2004.

D. Kalyon, "Method for Continuous Sterilizing and Encapsulation of Medical Waste", notice of invention submitted to Stevens Institute of Technology (1998).

D. Kalyon, "Method and Apparatus for the Value-Enhanced Recycling of Energetic Materials", notice of invention submitted to Stevens Institute of Technology (1998).

D. M. Kalyon and S. Kovenklioglu, "Disposal Method and Apparatus for Highly Toxic Chemicals by Chemical Neutralization and Encapsulation," U.S. Patent and Trademark Office; #5,584,071 issued on Dec. 10, 1996.

D. M. Kalyon, H. S. Gokturk, S. Railkar, "Electric Power Transmission System and Method of Asymmetric Transmission of Power to Mitigate Magnetic Fields," U.S. Patent and Trademark Office; # 5,391,929; issued on Feb. 21, 1995.

D. M. Kalyon, H. S. Gokturk, S. Railkar, "A Method and Apparatus for Mitigation of Magnetic Fields from Low Frequency Magnetic Field Sources," U.S. Patent and Trademark Office; # 5,365,115; issued on Nov. 15, 1994.

D. M. Kalyon, H. S. Gokturk, "Adjustable Gap Rheometer," U.S. Patent and Trademark Office # 5,277,058; issued on Jan. 11, 1994.

Selected Publications

Book

Mark J. Mezger, Kay J. Tindle, Michelle Pantoya, Lori J. Groven and Dilhan M. Kalyon, Editors, “Energetics Materials: Advanced Processing Technologies for Next-Generation Materials”, CRC Press, Taylor and Francis Group, Boca Raton, FL (2017).


Book Chapters

T. Fiske, H. S. Gokturk, R. Yazici and D. Kalyon, “Relative Magnetic Permeability of Injection Molded Composites as Affected by the Flow Induced Orientation of Ferromagnetic Particles”, in “Imaging and Image Analysis Applications of Plastics”, B. Pourdeyhimi ed., ChemTec Publishing (1999).

S. Kovenklioglu and D. M. Kalyon, "Conversion of Polymeric Precursors into Ceramics: Pore Formation," High Performance Composites for the 1990's, S. K. Das, C. P. Ballard and F. Marikar, eds., TMS Publications (1991) 377-387.

C. Gogos, D. M. Kalyon, P. Hold, J. Biesenberger and Z. Tadmor, "Polymer Processing," Encyclopedia of Chemical Processing and Design, Volume 39, Marcel Dekker (1992).

D. M. Kalyon and U. Yilmazer, "Rheological Behavior of Highly Filled Suspensions Which Exhibit Slip at the Wall," Polymer Rheology and Processing, A. Collyer and L. Utracki, eds., Elsevier Applied Science, London (1990).

C. Tsenoglou, D. M. Kalyon and C. Gogos, "A Viscoelastic Constitutive Relationship in Flowing Polymer Suspensions and Composites," Engineering Applications of New Composites, S. Paipetis, Ed., Omega Scientific, Oxon, U.K. (1988).

D. M. Kalyon, "Mixing in Continuous Processors," Encyclopedia of Fluid Mechanics, 7, Gulf Publishing (1988) Chapter 28, 887-926.
D. M. Kalyon, "Applications of Continuous Mixers," Encyclopedia of Engineering Materials, N. Cheremisinoff, ed., Marcel Dekker (1988).

M. Kamal and D. M. Kalyon, "Microstructure and Ultimate Properties of Extrusion Blow Molded Polyethylene Bottles," Interrelations Between Processing, Structure and Properties of Polymeric Materials, Elsevier Science Publishers, Amsterdam (1984).

D.M. Kalyon, "Melt Deformation during Parison Formation and Inflation in Extrusion Blow Molding," Rheology Volume 3: Applications, G. Astarita, G. Marrucci and L. Nicolais, eds., Plenum Press, New York (1980).


Journal Articles

L. Quan and D. Kalyon “Parallel-disk viscometry of a viscoplastic hydrogel: Yield stress and other parameters of shear viscosity and wall slip”, Gels, 8(4), 230 (2022).

Sarah Alshehri, Tonja Pavlovic, Sadaf Farsinejad, Panteha Behboodi, Li Quan, Daniel Centeno, Douglas Kung, Marta Rezler, Woo Lee, Piotr Jasiński, Elżbieta Dziabaszewska, Ewa Nowak-Markwitz, Dilhan Kalyon, Mikołaj P. Zaborowski and Marcin Iwanicki, “Extracellular Matrix Levels Modulate Outgrowths Dynamics in Ovarian Cancer”, bioRxiv, (2022). https://doi.org/10.1101/2022.01.30.478322.

D. Kalyon, “Yield stress and other flow and wall slip parameters of viscoplastic fluids from steady torsional flow, ArXiv, Physics/Fluid Dynamics/Condensed Matter, https://arxiv.org/abs/2106.13351v1 (2021).

Li Quan, Stephanie S. Lee and Dilhan Kalyon, “Dynamics of the sub-ambient gelation and shearing of solutions of P3HT and P3HT blends towards active layer formation in bulk heterojunction organic solar cells”, Soft Matter, 17, 1642-1654 (2021).

Alok Kumar, Seyed Mir, Ibrahim Aldulijan, Agrim Mahajan, Aneela Anwar, Carlos Leon, Amalia Terracciano, Xiao Zhao, Tsan-Liang Su, Dilhan Kalyon, Sangamesh Kumbar, Xiaojun Yu, “Load-bearing Biodegradable PCL-PGA- beta TCP Scaffolds for Bone Tissue Regeneration", Journal of Biomedical Materials Research: Part B - Applied Biomaterials, 109, 2, 193-200 (2021).

J. He, S. Lee, M. Colakyan and D. M. Kalyon, “Viscoelastic properties and flow instabilities of aqueous suspensions of cellulosic fibers: Effects of a gelation agent on dispersion, rheology, and flow stability”, Polymer Engineering and Science, 61, 4, 1150-1165 (2021).

E. Sahin and D. Kalyon, “Preshearing is an in situ setting modification method for inorganic bone cements”, Medical Devices and Sensors, 3, 2 (2020).

Jayadurga Iyer Ganapathi, Stephanie S. Lee, Dilhan M. Kalyon, Frank T. Fisher, “Impact of Ultrasonication on Carbon Nanotube Demixing and Damage in Polymer Nanocomposites”, Journal of Applied Polymer Science, 49370 (2020).

Esteban F. Medina-Bañuelos and Benjamín M. Marín-Santibáñez, José Pérez-González and D. M. Kalyon, “Rheo-PIV analysis of the vane in cup flow of a viscoplastic microgel”, J. Rheology, 63, 6, 905-915 (2019).

J. He, S. Lee and D. Kalyon, “Shear viscosity and wall slip behavior of dense suspensions of polydisperse particles,” J. Rheology 63, 1, 19-32 (2019).

L. Thomas, H. Tang, D. M. Kalyon, S. Aktas, J. D. Arthur, J. Blotevogel, J. W. Carey, A. Filshill, P. Fui, G. Hsuan, T. Huk, D. Soeder, S. Shah, R. Vidic, and M. H. Young, “Toward better hydraulic fracturing fluids in energy production: A review of sustainable technologies and reduction of potential environmental impacts”, Journal of Petroleum Science and Engineering, 173, 793-803 (2019).

A. Kumar, Y. Zhang, A. Terracciaon, X. Zhao, T. Su, D. M. Kalyon, S. Katebifar, S. G. Kumbar, X. Yu, “Load-bearing biodegradable PCL-PLGA- beta TCP scaffolds for the bone tissue regeneration”, Polymers for Advanced Technologies, 30, 1189-1197 (2019).

J. He, X. Kong, Y. Wang, M. Delaney, D. M. Kalyon, and S. S. Lee, “Crystallization-Arrested Viscoelastic Phase Separation in Semiconducting Polymer Gels”, ACS Applied Polym. Mat., 1 (3), 500-508 (2019).

Filippos Tourlomousis, Chao Jia, Thrasyvoulos Karydis, Andreas Mershin, Hongjun, Wang, D. M. Kalyon and R. Chang, “Machine Learning Metrology of Cell Confinement in Melt Electrowritten Three-Dimensional Biomaterial Substrates”, Microsystems and Nanoengineering, 5 :15, 1-19 (2019).

R. Chung, D. M. Kalyon, X. Yu, A. Valdevit, “Segmental bone replacement via patient-specific, 3D printed bioresorbable graft substitutes and their use as templates for culture of mesenchymal stem cells under mechanical stimulation at various frequencies”, Biotechnology and Bioengineering, 115, 2365-2376 (2018).

E. F. Medina-Bañuelos, B. M. Marín-Santibáñez, J. Pérez-González, M. Malik and D. M. Kalyon, “Couette flow of a viscoplastic microgel with wall slip”, J. Rheology, 61, 1007-1022 (2017).

D. E. Sahin and D. Kalyon, “The rheological behavior of a fast-setting calcium phosphate bonecement and its dependence on deformation conditions”, Journal of the Mechanical Behavior of Biomedical Materials, 72, 252-260 (2017).

M. Nie, D. Kalyon, K. Pochiraju and F. Fisher, "A controllable way to measure the interfacial strength between carbon nanotube and polymer using a nanobridge structure", Carbon, 116, 510-517 (2017).

Y. Wang, S. Aktas, S. A. Sukhishvili and D. M. Kalyon, “Rheological behavior and self-healing of hydrogen-bonded complexes of a triblock Pluronic® copolymer with a weak polyacid”, J. Rheology 61, 6, 1103-1119 (2017).

Discussion of paper by Y.Wang, J. He, S. Aktas, S. A. Sukhishvili, and D. M. Kalyon, entitled ‘Rheological behavior and self-healing of hydrogen-bonded complexes of a triblock Pluronic copolymer with a weak polyacid’, J. Rheology, 61, 6, 1121-1121 (2017).

S. Senturk-Ozer, S. Aktas, J. He, F. T. Fisher and D. M. Kalyon, “Electrospinning of suspensions of poly(caprolactone) and multi-walled carbon nanotubes: Effects of processing parameters on the dynamics of the spinning process and fiber characteristics”, Nanotechnology, 28, 025301 (2017).

R. Chang, F. Tourlomousis, H. Ding, and D. Kalyon, “Melt electrospinning writing process guided by a “Printability Number”", ASME Journal of Manufacturing Science and Engineering, 139, 081004-1-15 (2017).

J. I. Ganapathi, D. M. Kalyon and F. T. Fisher, “Effect of multistage sonication on dispersive mixing of polymer nanocomposites”, J. Appl. Polym. Sci., 134, 14, 44681 (2017).

J. Fabian Ortega-Avila, J. Pérez-González, B. M. Marín-Santibáñez, F. Rodríguez-González, S. Aktas, M. Malik and D. M. Kalyon, “Axial annular flow of a viscoplastic microgel with wall slip”, J. Rheology, 60, 3, 503-515 (2016).

J. I. Ganapathi, F. T Fisher, and D. M. Kalyon, “Distributive mixing of carbon nanotubes in poly(caprolactone) via solution and melt processing: Viscoelasticity and crystallization behavior versus mixing indices”, J. Polym. Sci. Part B: Polym. Phys., 54, 21, 2254-2268 (2016).

C. Erisken, D. Kalyon, J. Zhou, S. G. Kim, and J. J. Mao, “Viscoelastic properties of dental pulp tissue and ramifications on biomaterial development for pulp regeneration”, Journal of Endodontics, 41, 10, 1711-1717 (2015). (Honorable Mention award of Journal of Endodontics 2016)

M. Nie, D. Kalyon, F. Fisher, "Reverse kebab structure formed inside carbon nanofibers via nanochannel flow", Langmuir, 31, 10047-10055 (2015).

N. Degirmenbasi, S. Coskun, N. Boz, and D. Kalyon, “Biodiesel synthesis from canola oil via heterogeneous catalysis using functionalized CaO nanoparticles”, Fuel, 153, 620-627 (2015).

H. T. Kahraman, H. Gevgilili, E. Pehlivan and D. M. Kalyon, “Development of an epoxy based intumescent system comprising of nanoclays blended with appropriate formulating agents”, Progress in Organic Coatings, 78, 208-219 (2015).

N. Boz, N. Degirmenbasi and D. Kalyon, “Esterification and Transesterification of Waste Cooking Oil over Amberlyst-15 and Modified Amberlyst-15 Catalysts”, Appl. Catal. B: Environ., 165, 723-730 (2015).

S. Senturk-Ozer, T. Chen, N. Degirmenbasi, H. Gevgilili, S. G. Podkolzin, D. M. Kalyon, “Nanobursa mesh: Graded electrospun nanofiber mesh with metal nanoparticles on carbon nanotubes”, Nanoscale, 6, 8527-8530 (2014).

S. Aktas, D. M. Kalyon, B. M. Marín-Santibáñez and J.Pérez-González, “Shear viscosity and wall slip behavior of a viscoplastic hydrogel”, J. Rheology, 58, 2, 513-535 (2014).

M. Malik, D. M. Kalyon, and J. C. Golba Jr., “Simulation of co-rotating twin screw extrusion process subject to pressure-dependent wall slip at barrel and screw surfaces: 3D FEM Analysis for combinations of forward- and reverse-conveying screw elements”, International Polymer Processing, 29, 1, 51-62 (2014).

S. Aktas, H. Gevgilili, I. Kucuk, A. Sunol and D. M. Kalyon, “Extrusion of foams from engineering plastics using supercritical CO2”, SPE Plastics Research Online, 10.2417/spepro.005185 (2014).

N. Degirmenbasi, N. Boz and D. Kalyon, “Biofuel production via transesterification using sepiolite-supported alkaline catalysts”, Applied Catalysis B: Environmental, 150-151, 147-156 (2014).

D. M. Kalyon and S. Aktaş, “Factors affecting the rheology and processability of highly filled suspensions”, Annual Rev. Chem. Biomol. Eng, 5, 229–254 (2014).

D. M. Kalyon, C. Erisken, S. Ozkan, A. Ergun-Butros, X. Yu, H. Wang, A. Valdevit and A. Ritter, “Functionally-graded polymeric graft substitutes and scaffolds for tissue engineering can be fabricated via various extrusion methods”, J. Tissue Sci. Eng., 5, 1 (2014).

M. Nie, D. M. Kalyon, F. T. Fisher, “Interfacial load transfer in polymer/carbon nanotube nanocomposites with a nanohybrid shish kebab modification”, ACS Applied Materials & Interfaces, 6, 17, 14886-14893 (2014).

S. Aktas, H. Gevgilili, I. Kucuk, A. Sunol and D. M. Kalyon, “Extrusion of poly(ether imide) foams using pressurized CO2: Effects of imposition of supercritical conditions and nanosilica modifiers”, Polymer Engineering and Science, 54, 9, 2064-2074 (2014).

I. Kucuk, H. Gevgilili and D. Kalyon, “Effects of dispersion and deformation histories on rheology of semi-dilute and concentrated suspensions of multi-walled carbon nanotubes”, J. Rheology, 57, 1491-1514 (2013).

R. Junka, C. M. Valmikinathan, D. M. Kalyon, X. Yu, “Laminin functionalized biomimetic nanofibers for nerve tissue engineering”, Journal of Biomaterials and Tissue Engineering, 3, 4, 494-502 (2013).

X. Chen, A. Ergun, H. Gevgilili, S. Ozkan, D. M. Kalyon, and H. Wang, “Shell-core bi-layered scaffolds for engineering of vascularized osteon-like structures”, Biomaterials, 34, 33, 8203-8312 (2013).

N. Boz, N. Degirmenbasi and D. M. Kalyon, “Transesterification of canola oil to biodiesel using calcium bentonite functionalized with K compounds, Appl. Catal. B: Environ., 138-139, 236-242 (2013).

H. T. Kahraman, H. Gevgilili, E. Pehlivan and D. M. Kalyon, “Nanoclay dispersion into a thermosetting binder employing ultrasonication and intensive mixing methods”, J. Applied Polymer Science, 129, 4, 1773-1783 (2013).

S. Senturk-Ozer, D. Ward, H. Gevgilili and D. Kalyon, “Dynamics of electrospinning of poly(caprolactone) via hybrid twin screw extrusion and electrospinning and properties of electrospun fibers”, Polymer Engineering and Science, 53, 7, 1463-1474 (2013).

D. M. Kalyon, X. Yu, H. Wang, A. Valdevit and A. Ritter, “Twin screw extrusion based technologies offer novelty, versatility, reproducibility and industrial scalability for fabrication of tissue engineering scaffolds”, J. Tissue Sci. Eng., 4, 2, e126 (2013).

K. B. Shepard, H. Gevgilili, D. M. Kalyon, F. T. Fisher, M. Ocampo, and J. Li, “Viscoelastic behavior of poly(ether imide) incorporated with multi-walled carbon nanotubes”, Journal of Polymer Science Part B: Polymer Physics, 50, 1504–1514 (2012).

D. Kalyon and M. Malik, “Axial laminar flow of viscoplastic fluids in a concentric annulus subject to wall slip”, Rheologica Acta, 51, 805–820 (2012).

A. Ergun, X. Yu, A. Valdevit, A. Ritter and D. M. Kalyon, “Radially and axially-graded multi-zonal scaffolds targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate”, Tissue Engineering Part A, 18, 23/24, 2426-2436 (2012).

S. F. Bartolucci, G. Mago, F. T. Fisher, E. Troiano, D. M. Kalyon, “Unusual fracture surface morphology of fatigued carbon nanofiber/poly(ether ether ketone) composites”, Carbon, 502347–2374 (2012).

A. Ergun, R. Chung, D. Ward, A. Valdevit, A. Ritter, D. M. Kalyon, “Unitary bioresorbable cage/core bone graft substitutes for spinal arthrodesis coextruded from polycaprolactone biocomposites”, Annals of Biomedical Engineering, 40, 5, 1073-1087 (2012).

A. Ergun, X. Yu, A. Valdevit, A. Ritter and D. M. Kalyon, “In vitro analysis and mechanical properties of twin screw extruded single-layered and co-extruded multi-layered poly(caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering”, J. Biomedical Materials Research Part A, 999A,1-13 (2011).

G. Mago, D. Kalyon and F. Fisher, “Nanocomposites of polyamide-11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing”, Journal of Polymer Science Part B: Polymer Physics, 49, 1311-1321 (2011).

S. Senturk-Ozer, H. Gevgilili and D. Kalyon, “Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing”, Bioresource Technology, 102, 9068-9075 (2011).

H. Gevgilili, D. Kalyon, E. Birinci, M. Malik, L. Goovaerts, R. Bacon and P. Mort, “Dynamic assembly of anionic surfactant into highly-ordered vesicles”, Journal of Colloids and Interface Science, 356, 579-588 (2011).

A. Ergun, D. Kalyon, A. Valdevit, A. Ritter , X. Yu, “Twin screw extrusion and co-extrusion based fabrication of uniform and multilayered scaffolds for bone tissue engineering”, Orthopaedic Research Society, Transactions Vol. 36, 0285 (2011).

A. Ergun, D. Kalyon, A. Valdevit and A. Ritter, “Compressive fatigue behavior of osteoblast seeded tissue constructs of poly(caprolactone) multilayered scaffolds for bone graft substitute applications”, Orthopaedic Research Society, Transactions Vol. 36, 1850 (2011).

C. Erisken, D. Kalyon, C. Ornek, H. Wang and J. Xu, “Osteochondral tissue formation through adipose-derived stem cell differentiation using biomimetic tissue scaffolds with graded stimulator concentrations", Tissue Engineering: Part A, 17, Numbers 9 and 10, 1239-1252 (2011).

S. Ozkan, D. Kalyon and X. Yu, "Functionally graded b-TCP/PCL nanocomposite scaffolds for bone tissue engineering: In vitro evaluation with human fetal osteoblast cells", Journal of Biomedical Materials Research A, 92, 3, 1007-1018 (2010).

C. Erisken, D. Kalyon and H. Wang, “Viscoelastic and biomechanical properties of tissue engineered constructs for osteochondral tissue regeneration”, J. Biomechanical Engineering, 132, 091013-9 (2010).

S. Vural, K. Dikovics and D. Kalyon, “Crosslink Density, Viscoelasticity and Swelling of Hydrogels as affected by Dispersion of Multi-walled Carbon Nanotubes”, Soft Matter, 6, 3870-3875 (2010).

D. Kalyon, “An Analytical Model for Steady Coextrusion of Viscoplastic Fluids in Thin Slit Dies with Wall Slip”, Polymer Engineering and Science, 50, 4, 652-664 (2010).

S. H. Modi, K. B. Dikovics, H. Gevgilili, G. Mago, S. Bartolucci, F. T. Fisher and D. M. Kalyon, “Effects of carbon nanofibers on the thermo-oxidative degradation of poly(ether ether ketone)”, Polymer, 51, 5236-5244 (2010).

G. Mago, D. M. Kalyon, S. C. Jana, and F. T. Fisher, “Polymer Nanocomposite Processing, Characterization and Applications”, Journal of Nanomaterials, Article ID 325807 (2010).

N. Degirmenbasi, S. Ozkan, D. Kalyon and X. Yu, “Surface patterning of poly (L-lactide) upon melt processing: in vitro culturing of fibroblasts and osteoblasts on surfaces ranging from highly crystalline with spherulitic protrusions to amorphous with nanoscale indentations”, Journal of Biomedical Materials Research A, 88A (1), 94-104 (2009).

S. Ozkan, D. M. Kalyon, X. Yu, C. McKelvey and M. Lowinger, “Multifunctional protein-encapsulated polycaprolactone scaffolds: Fabrication and in vitro assessment for tissue engineering”, Biomaterials, 30, 4336-4347 (2009).

N. Boz, N. Degirmenbasi and D. Kalyon, “Conversion of Biomass to fuel: Transesterification of vegetable oil to biodiesel using KF loaded nano-γ-Al2O3 as catalyst”, Applied Catalysis B: Environmental, 89, 590-596 (2009).

G. Mago, F. T. Fisher and D. Kalyon, “Deformation-induced crystallization and associated morphology development of carbon nanotube-PVDF nanocomposites”, Journal of Nanoscience and Nanotechnology, 9, 5, 3330-3340 (2009).

G. Mago, F. T. Fisher and D. Kalyon, “Polymer crystallization and precipitation-induced wrapping of carbon nanofibers with PBT”, Journal of Applied Polymer Science, 114, 1312-1319 (2009).

D. H. Moon, M. Wazne, A. Koutsospyros, C. Christoudoulatos, H. Gevgilili, M. Malik and D. M. Kalyon, "Evaluation of the treatment of chromite ore processing residue by ferrous sulfate and asphalt emulsion", Journal of Hazardous Materials, 166, 27-32 (2009).

S. F. Bartolucci, G. Mago, H. Gevgilili, S. Vural, K. Dikovics, D. M. Kalyon and F. Fisher, “Investigation of the PEEK-Nanotube Composites Prepared by Solution Methods”, Proceedings of IMECE2009 ASME International Mechanical Engineering Congress, Paper no. IMECE2009-11938, Volume 12: Micro and Nano Systems, Parts A and B, 279-282, (2009).

H. S. Tang and D. M. Kalyon, "Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities", Journal of Rheology, 52, 5, 1069-1090 (2008).

C. Erisken, D. M. Kalyon and H. Wang, “Functionally and continuously graded electrospun polycaprolactone and β-tricalcium phosphate nanocomposites for interface tissue engineering applications”, Biomaterials 29, 4065-4073 (2008).

G. Mago, F. T. Fisher and D. M. Kalyon, “Effects of multiwalled carbon nanotubes on the shear-induced crystallization behavior of poly (butylene terephthalate)”, Macromolecules, 41 (21), 8103–8113 (2008).

C. Erisken, D. Kalyon and H. Wang, “A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibers”, Nanotechnology, 19, 165302 (2008).

G. Mago, D. M. Kalyon and F. T. Fisher, “Membranes of Polyvinylidene fluoride (PVDF) and PVDF Nanocomposites with Carbon Nanotubes via Immersion Precipitation", Journal of Nanomaterials (special issue on Nanomechanics and Nanostructured Multifunctional Materials), 3, 759825 (2008).

H. Gevgilili, D. Kalyon and A. Shah, “Processing of energetics in continuous shear roll mills”, Journal of Energetic Materials, 26, 29-51 (2008).

H. S. Tang and D. M. Kalyon, “Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip”, J. Rheology, 52, 2, 507-526 (2008).

G. Mago, D. M. Kalyon and F. F. Fisher, “Crystallization and morphology of carbon nanofibers-Nylon 11 nanocomposites”, Polymeric Materials: Science and Engineering, 99, 508 (2008).

D. M. Kalyon and H. Tang, “Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip”, Journal of Non-Newtonian Fluid Mechanics, 143, 133-140 (2007).

S. Ozkan, H. Gevgilili, D.M. Kalyon, J. Kowalczyk, and Mark Mezger, “Twin screw extrusion of nano-alumina based simulants of energetic formulations involving gel based binders”, Journal of Energetic Materials, 25, 3, 173-201 (2007).

E. Demirkol and D. M. Kalyon, “Batch and continuous processing of polymer layered organoclay nanocomposites”, Journal of Applied Polymer Science, 104, 1391-1398 (2007).

D. M. Kalyon and M. Malik, “An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders”, International Polymer Processing, 22, 293-302 (2007).

M. Allende, D. Fair, D. M. Kalyon, D. Chiu and S. Moy, “Development of particle concentration distributions and burn rate gradients upon shear-induced particle migration during processing of energetic suspensions”, Journal of Energetic Materials, 25, 49- 67 (2007).

J. E. Kowalczyk, M. Malik, D. M. Kalyon, H. Gevgilili, D. F. Fair, M. Mezger and M. Fair, “Safety in Design and Manufacturing of Extruders used for the Continuous Processing of Energetic Formulations”, Journal of Energetic Materials, 25, 247-271 (2007).

D. M. Kalyon, D. Dalwadi, M. Erol, E. Birinci and C. Tsenoglou, “Rheological Behavior of Concentrated Suspensions as affected by the Dynamics of the Mixing Process”, Rheologica Acta, 45, 641-658 (2006).

N. Degirmenbasi, D. M. Kalyon and E. Birinci, “Biocomposites of Nanohydroxyapatite with Collagen and Poly(vinyl alcohol)”, Colloids and Surfaces B Biointerfaces, 48, 42- 49 (2006).

E. Birinci and D. M. Kalyon, “Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles”, J. Rheology, 50, 3, 313-326 (2006).

Z. Peralta-Inga, N. Degirmenbasi, U. Olgun, H. Gocmez and D. M. Kalyon, “Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part I, Mathematical Modeling using Molecular Dynamics Method”, Journal of Energetic Materials, 24, 69-101 (2006).

N. Degirmenbasi, Z. Peralta-Inga, U. Olgun, H. Gocmez and D. M. Kalyon, “Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part II, Experimental Studies”, Journal of Energetic Materials, 24, 103- 139 (2006).

R. Schefflan, S. Kovenklioglu, D. Kalyon, M. Mezger and M. Leng, “Formation of aluminum nanoparticles upon condensation from vapor phase for energetic applications”, Journal of Energetic Materials, 24, 141- 156 (2006).

R. Schefflan, S. Kovenklioglu, D. Kalyon, P. Redner and E. Heider, “Mathematical model for a fed-batch process for energetic crystals to achieve targeted size distributions”, Journal of Energetic Materials, 24, 157- 172 (2006).

D. Kalyon, H. Gevgilili, J. Kowalczyk, S. Prickett and C. Murphy, “Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations”, Journal of Energetic Materials, 24, 175-193 (2006).

D. Kalyon, H. Tang and B. Karuv, “Squeeze flow rheometry for rheological characterization of energetic formulations”, Journal of Energetic Materials, 24, 195-202 (2006).

D. Kalyon, “An overview of the rheological behavior and characterization of energetic formulations: Ramifications on safety and product quality”, Journal of Energetic Materials, 24, 213-245 (2006).

E. Birinci, H. Gevgilili, D. Kalyon, B. Greenberg, D. Fair and A. Perich, “Rheological characterization of nitrocellulose gels”, Journal of Energetic Materials, 24, 247-269 (2006).

D. Kalyon, “Comments on the use of rheometers with rough surfaces or surfaces with protrusions”, J. Rheology, 49, 5, 1153-1155 (2005).

D. Kalyon, “Apparent Slip and Viscoplasticity of Concentrated Suspensions”, J. Rheology, 49, 3, 621-640 (2005).

R. Yazici and D. Kalyon, “Microstrain and defect analysis of CL-20 crystals by novel x-ray methods”, Journal of Energetic Materials, 23, 43-58 (2005).

M. Erol and D. Kalyon, “Assessment of the Degree of Mixedness of Filled Polymers: Effects of Processing Histories in Batch Mixer and Co-Rotating and Counter-rotating Twin Screw Extruders”, International Polymer Processing, 20, 228-237 (2005).

M. Malik and D. Kalyon, “Three-dimensional Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential Twin Screw Extruder and Die Combination”, International Polymer Processing, 20, 398- 409 (2005).

U. Olgun and D. Kalyon, “Use of Molecular Dynamics to investigate polymer melt-metal wall interactions” Polymer, 46, 9423-9433 (2005).

C. Feger, J. D. Gelorme, M. McGlashan-Powell and D. Kalyon, “Mixing, Rheology and Stability of Highly Filled Thermal Pastes”, IBM Journal of Research and Development, 49, 4/5, 699-707 (2005).

D. Kalyon, H. Gevgilili and A. Shah, “Detachment of the polymer melt from the roll surface: data from a shear roll extruder”, International Polymer Processing, 19, 2, 129-138 (2004).

H. Tang and D. Kalyon, “Estimation of the Parameters of Herschel-Bulkley Fluid under Wall Slip Using a Combination of Capillary and Squeeze Flow Viscometers”, Rheologica Acta, 43, 1 80-88 (2004).

D. Kalyon, H. Gevgilili, R. Yazici, A. Post and G. McFann, “Flow and structure development behavior of bar soaps containing synthetic detergent”, Rheologica Acta, 43, 396-405 (2004).

G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, “Rheology and processing of BaSO4 filled medical-grade thermoplastic polyurethane”, Polymer Engineering and Science, 44, 10, 1941-1948 (2004).

D. Kalyon, “Comments on “A new method of processing capillary viscometry data in the presence of wall slip” [J. Rheol. 47, 337-348 (2003)]”, J. Rheology, 47, 4, 1087-1088 (2003).

B. L. Greenberg, D. M. Kalyon, M. Erol, M. Mezger, K. Lee and S. Lusk, “Analysis of Slurry-Coating Effectiveness of CL-20 using a Novel Grazing Incidence X-ray Diffraction Method,” Journal of Energetic Materials, 21, 1, 185 (2003).

D. Kalyon and H. Gevgilili, “Wall slip and extrudate distortion of three polymer melts”, J. Rheology, 47, 3, 683-699 (2003).

D. Kalyon, G. Lu, I. Yilgor and E. Yilgor, “Rheology and Extrusion of Medical-grade Thermoplastic Polyurethane”, Polymer and Engineering Science, 43, 12, 1863-1877 (2003).

A. Wagner, D. Kalyon, R. Yazici, and T. Fiske, “Uniaxial Extensional Flow Behavior of a Glass Fiber-Filled Engineering Plastic”, Journal of Reinforced Plastics and Composites”, 22, 4, 327-337 (2003).

D. Kalyon, E. Birinci, R. Yazici, B. Karuv, and S. Walsh, “Electrical Properties of Composites as Affected by the Degree of Mixedness of the Conductive Filler in the Polymer Matrix”, Polym. Eng. Sci., 42, 7, 1609-1617 (2002).

H. Gevgilili and D.M. Kalyon, “Step Strain Flow: Wall Slip and other Error Sources”, J. Rheology, 45, 2, 467-475 (2001).

A. Lawal, S. Railkar and D. Kalyon, “Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip”, Journal of Reinforced Plastics and Composites, 19, 18, 1483-1492 (2000).

M. Allende and D. Kalyon, “Assessment of Particle-Migration Effects in Pressure-Driven Viscometric Flows”, J. Rheology, 44, 1, 79-90 (2000).

A. Lawal and D. M. Kalyon, “Compressive Squeeze Flow of Viscoplastic Fluids with Apparent Wall Slip”, International Polymer Processing, 15, 1, 63-71 (2000).

D. M. Kalyon, A. Lawal, R. Yazici, P. Yaras and S. Railkar, "Mathematical Modeling and Experimental Studies of Twin Screw Extrusion of Filled Polymers", Polym. Eng. Sci., 39, 6, 1139-1151 (1999).

A. Lawal and D. M. Kalyon, “Analysis of Nonisothermal Screw Extrusion Processing of Viscoplastic Fluids with Significant Backflow”, Chem. Eng. Sci., 54, 999-1013 (1999).

A. Lawal and D. M. Kalyon, “Squeezing Flow of Viscoplastic Fluids Subject to Wall Slip”, Poly. Eng. and Science, 38, 11, 1793-1804 (1998).

M. Akbulut, W. C. Ermler and D. M. Kalyon, "Ab Initio Cluster Model Study of Polymer-Metal Interactions," Computational and Theoretical Polymer Science, 7, 2, 75-80 (1998).

Z. Cao, S. Kovenklioglu, D. M. Kalyon and R. Yazici, "Experimental Investigation and Modeling of Dissolution of Polymers and Filled Polymers", Polymer Engineering and Science, 31, 1, 90-100 (1998).

H. Suwardie, R. Yazici, D. M. Kalyon and S. Kovenklioglu, "Capillary Flow Behavior of Microcrystalline Wax and Silicon Carbide Suspension," J. Materials Sci., 33, 5059-5067 (1998).

T. Fiske, H. Gokturk and D. M. Kalyon, "Enhancement of the Relative Permeability of Polymeric Composites with Hybrid Particulate Fillers," Journal of Applied Polymer Science, 65, 1371-1377 (1997).

T. Fiske, H. Gokturk and D. M. Kalyon, "Percolation in Magnetic Composites," Journal of Material Science, 32, 5551-5560 (1997).

A. Lawal and D. M. Kalyon, "Viscous Heating in Nonisothermal Die Flows of Viscoplastic Fluids with Wall Slip," Chem. Eng. Sci., 52, 8, 1323-1337 (1997).

A. Lawal, S. Railkar and D. M. Kalyon, "A new Approach to Simulation of Die Flow which incorporates the Extruder and the Rotating Screw Tips in the Analysis," Int. Polym. Proc., 12, 2, 123-135 (1997).

B. Aral and D. M. Kalyon, "Viscoelastic Material Functions of Noncolloidal Suspensions with Spherical Particles," J. Rheology, 41, (3), 599-620 (1997).

Z. Cao, S. Kovenklioglu, D. M. Kalyon and R. Yazici, "Dissolution Study of BAMO/AMMO Thermoplastic Elastomers for the Recycling and Recovery of Energetic Materials," J. of Energetic Materials, 15, 73-107 (1997).

T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Effects of Flow Induced Orientation of Ferromagnetic Particles on Relative Magnetic Permeability of Injection Molded Composites," Polym. Eng. Sci., 37, 826-837 (1997).

A. Lawal and D. M. Kalyon, "Non-Isothermal Extrusion Flow of Viscoplastic Fluids with Wall Slip", International Journal of Heat and Mass Transfer, 40 (16), 3883-3897 (1997).

R. Yazici and D. M. Kalyon, "Quantitative Characterization of Degree of Mixedness of LOVA Grains," Journal of Energetic Materials, 14 (1), 57-73(1996).

A. Wagner and D. M. Kalyon, "Parison Formation and Inflation Behavior of Polyamide Resins in Extrusion Blow Molding," Polym. Eng. Sci., 36,(14), 1897-1906(1996).

A. Wagner, R. Yazici and D.M. Kalyon, "Extrudate Swell Behavior of a Fiber Filled Suspension," Polymer Composites, 17 (6), 840-849 (1996).

A. Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Pressurization and Heat Transfer During Twin Screw Extrusion Processing of Concentrated Suspensions," Journal of Materials Processing and Manufacturing Science, 5, 57-78 (1996).

A. Lawal and D. M. Kalyon, "Mechanisms of Mixing in Single and Co-rotating Twin Screw Extruders," Polym. Eng. Sci., 35 (17) 1325-1338 (1995).

A. Lawal and D. M. Kalyon, "Simulation of the Intensity of Segregation Distributions Using Three-Dimensional FEM Analyses: Applications to Co-rotating Twin Screw Extruders," Journal of Applied Polymer Science, 58, 1501-1507 (1995).

B. Aral and D. M. Kalyon, "Rheology and Extrudability of Very Concentrated Suspensions: Effects of Vacuum Imposition," Plast. and Rubber Comp. Proc. and Applications, 24, 201-210 (1995).

D. M. Kalyon, "Highly Filled Materials: Understanding the Generic Behavior of Highly Filled Materials Leads to Manufacturing Gains and New Technologies," Chem Tech, 25 (5), 22-30 (1995).

D. M. Kalyon and S. Kovenklioglu, "Disposal of Chemical Munitions Using Concomitant Neutralization, Gelation and Encapsulation," Journal of Energetic Materials, 13 (3-4), 165-183 (1995).

D. M. Kalyon, Y. N. Chiou, S. Kovenklioglu and A. Bouaffar, "High Pressure Polymerization of Ethylene and Properties of Polyethylene Product," Polymer Engineering and Science, 34 (10), 804-814 (1994).

P. Yaras, D. M. Kalyon, and U. Yilmazer, "Flow Instabilities in Capillary Flow of Concentrated Suspensions," Rheologica Acta, 33, 48-59 (1994).

A. Lawal and D. M. Kalyon, "Non-isothermal Model of Single Screw Extrusion of Generalized Newtonian Fluids," Numerical Heat Transfer, 26 (1), 103-121 (1994).

A. Lawal and D. M. Kalyon, "Single Screw Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces," Polym. Eng. Sci., 34, 1471-1479 (1994).

B. Aral and D. M. Kalyon, "Effects of Temperature and Surface Roughness on Time-Dependent Development of Wall Slip in Torsional Flow of Concentrated Suspensions," J. Rheol., 38 (4), 957-972 (1994).

T. Fiske, S. Railkar and D. M. Kalyon, "Effects of Segregation on the Packing of Spherical and Non-Spherical Particles," Powder Technology, 81, 57-64 (1994).

A. Lawal, D. M. Kalyon, and Z. Ji, "Computational Study of Chaotic Mixing in Co-Rotating Two-Tipped Kneading Paddles: Two-Dimensional Approach," Polymer Engineering and Science, 33 (3), 140-148 (1993).

D. Kalyon, P. Yaras, B. Aral and U. Yilmazer, "Rheological Behavior of Concentrated Suspensions: A Solid Rocket Fuel Simulant," J. Rheology, 37, 35-53 (1993).

J. S. Sun, H. S. Gokturk and D. M. Kalyon, "Volume and Surface Resistivity of Low Density Polyethylene Filled with Stainless Steel Fibers," Journal of Materials Science, 28, 364-366 (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Granular Magnetic Composites Employing Cobalt Based Amorphous Alloys in a Polymeric Host," J. Appl. Physics, 73 (10), 5598-5600 (1993).

D. M. Kalyon, "Review of Factors Affecting the Continuous Processing and Manufacturability of Highly Filled Suspensions," Journal of Materials Processing and Manufacturing Science, 2 159-187 (1993).

A. Lawal, D. M. Kalyon and U. Yilmazer, "Extrusion and Lubrication Flows of Viscoplastic Fluids with Wall Slip," Chem. Eng. Comm., 122, 127 (1993).

Y. Chen, D. M. Kalyon and E. Bayramli, "Effects of Surface Roughness and the Chemical Structure of Materials of Construction on Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow," J. Appl. Polym. Sci., 50 (7), 1169-1177 (1993).

R. Yazici and D. M. Kalyon, "Degree of Mixing Analyses of Concentrated Suspensions by Electron Probe and X-Ray Diffraction," Rubber Chem. and Tech., 66 (4), 527-537 (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Effects of Particle Shape and Size Distributions on the Electrical and Magnetic Properties of Nickel/Polyethylene Composites," J. Appl. Polym. Sci., 50, 1891-1901 (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Electric and Magnetic Properties of a Thermoplastic Elastomer Incorporated with Ferromagnetic Powders," IEEE Transactions on Magnetics, 29 (6), 4170-4176 (1993).

S. B. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields," J. of Reinforced Plastics and Composites, 12, 1212-1220 (1993).

J. S. Yu, A. H. Wagner and D. M. Kalyon, "Simulation of the Microstructure Development in Injection Molding of Engineering Plastics," Journal of Applied Polymer Science, 44, 477-489 (1992).

J. Yu and D. M. Kalyon, "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part II," Polym. Eng. Sci., 31(3), 153-160 (1991).

J. Yu, M. Lim and D. M. Kalyon, "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part I," Polym. Eng. Sci., 31(3), 145-152 (1991).

D. Kalyon, H. Suwardie and S. Kovenklioglu, "Thermal Behavior and Curing Kinetics of Poly(carbosilane)," Journal of Applied Polymer Science, 42, 1087-1095(1991).

J. S. Yu and D. M. Kalyon, "Microstructure Development in Blow Molded Amorphous Engineering Plastics," Plastics Rubber and Composites Processing and Applications, 15, 95-101(1991).

U. Yilmazer and D. M. Kalyon, "Dilatancy of Concentrated Suspensions with Newtonian Matrices," Polymer Composites 12 (4), 226-232 (1991).

A. Wagner and D. M. Kalyon, "Development of Cracks in Injection Molded Amorphous Engineering Plastics," Polym. Eng. Sci. 21 (19), 1393-1399 (1991).

D. M. Kalyon, C. Jacob and P. Yaras, "An Experimental Study of the Degree of Fill and Melt Densification in Fully-intermeshing, Co-rotating Twin Screw Extruders," Plastics, Rubber and Composites Processing and Applications, 16 (3), 193-200 (1991).

D. M. Kalyon, R. Yazici, C. Jacob, B. Aral and S. W. Sinton, "Effects of Air Entrainment on the Rheology of Concentrated Suspensions during Continuous Processing," Polym. Eng. Sci., 31, 1386-1392 (1991).

D. M. Kalyon and D. Czerwonka, "Uniaxial Extensional Flow of Film Blowing Grade Polyethylenes in the Very Low to High Density Range," Plastics and Rubber Processing and Applications 14, 29-33(1990).

H. Yao, S. Kovenklioglu and D. M. Kalyon, "Pore Formation in the Pyrolysis of Polymers to Ceramics," Chem. Eng. Comm., 96, 155-175 (1990).

D. M. Kalyon and H. Sangani, "An Experimental Study of Distributive Mixing in Fully Intermeshing Co-rotating Twin Screw Extruders," Polymer Engineering Science, 29 (15), 1018-1026 (1989).

U. Yilmazer , C. Gogos and D. M. Kalyon, "Mat Formation and Unstable Flows of Highly Filled Suspensions in Capillaries and Continuous Processors," Polymer Composites, 10 (4), 242-248(1989).

U. Yilmazer and D. M. Kalyon, "Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled Suspensions," J. Rheology, 33 (8), 1197-1212 (1989). doi.org/10.1122/1.550049.

Wagner, J. Yu and D. M. Kalyon, "Injection Molding of Engineering Plastics," Adv. Polym. Tech., 9 (1), 17-32(1989).

A. Wagner J. Yu and D. M. Kalyon, "Microstructure and Ultimate Properties of Injection Molded Amorphous Engineering Plastics: Poly(ether Imide) and Poly (2,6-Dimethyl-1,4-Phenylene Ether)," Polymer Engineering and Science, 29 (18), 1298-1307(1988).

D. M. Kalyon and F. Moy, "Ultimate Properties of Blown Films of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers," Polymer Engineering and Science, 28 (23), 1551-1558(1988).

D. M. Kalyon, D. Yu and J. Yu, "Rheology and Processing of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers," Polymer Engineering and Science, 28 (23), 1542-1550(1988).

D. M. Kalyon, D. Yu and J. Yu, "Melt Rheology of Two Engineering Plastics: Poly(ether imide) and Poly (2,6-dimethyl-1,4 phenylene ether)," Journal of Rheology, 32 (8), 789-811(1988).

D. M. Kalyon, A. Gotsis, U. Yilmazer, C. Gogos, H. Sangani, B. Aral and C. Tsenoglou, "Development of Experimental Techniques and Simulation Methods to Analyze Mixing in Co-rotating Twin Screw Extrusion," Advances in Polymer Technology, 8 (4), 337-353(1988).

D. M. Kalyon, J. Yu and C. Du, "A Distributed Model of Flow in Spiral Mandrel Die," Polymer Process Engineering, 5 (2), 179-207(1987).

D. M. Kalyon and M. Khemis, "Role of Slip Additives in Blown Film Extrusion of Low Density Polyethylene," Plastics and Rubber Processing and Applications, 8, 157-164 (1987).

D. M. Kalyon, "Pressurization and Pumping in Polymer Processing," Chemical Engineering Progress, 48-51, June 1987.

D. M. Kalyon, "Melting, Softening and Solidification in Polymer Processing," Chemical Engineering Progress, 45-48, June 1987.

D. M. Kalyon, "Handling of Particulate Solids," Chemical Engineering Progress, 42-45, June 1987.

D. M. Kalyon and S. Kovenklioglu, "Processability of Organometallic Polymer Precursors for Non-Oxide Ceramic Applications," Adv. Polym. Tech., 7 (2), 191-199(1987).

D. M. Kalyon and M. Kamal, "An Experimental Investigation of Capillary Extrudate Swell in Relation to Parison Swell Behavior in Blow Molding," Polymer Engineering and Science, 26 (7), 504-512(1986).

D. M. Kalyon, V. Tan, S. Bhakhuni and F. Moy, "Microstructure Development in the Blown Film Extrusion of LLDPE's as Affected by Alpha-Olefin Comonomers," J. Film and Sheeting, 2, 310-320(1986).

D. M. Kalyon and M. Hallouch, "Compounding of Thermosets in Continuous Kneaders," Adv. in Poly. Tech., 6 (3), 237-249(1986).

D. M. Kalyon and N. Fares, "Chemorheology and Ultimate Properties of Thermosetting Molding Powders Filled with Recycled Thermosets," Plastics and Rubber Processing and Applications, 5 (4), 357-362 (1985).

M. Kamal and D. M. Kalyon, "Heat Transfer and Microstructure in Extrusion Blow Molding," Polymer Engineering and Science, 23 (9), 503-509(1983).

M. Kamal, D. M. Kalyon and V. Tan, "Anisotropy and Dimensions of Blow Molded Polyethylene Bottles," Polymer Engineering and Science, 22, 287-291(1982).

M. Kamal, V. Tan and D. M. Kalyon, "Measurement and Calculation of Parison Dimensions and bottle Thickness Distribution during Blow Molding," Polymer Engineering and Science, 21, 331-338 (1981).

M. Kamal, D. M. Kalyon and J. Dealy, "An Integrated Experimental Study of the Injection Molding Behavior of Some Polyethylene Resins," Polymer Engineering and Science, 20 (17), 1117-1126(1980).

D. M. Kalyon, M. Kamal and V. Tan, "The Dynamics of Parison Development in Blow Molding," Polymer Engineering and Science, 20, 773-777(1980).

Courses

CHE 345 Process Control, Modeling and Simulation
CHE 670 Polymer Properties and Structure
CHE 671 Polymer Rheology
CHE 672 Processing of Polymers for Biomedical Applications
CHE 678 Experimental Methods in Polymer Melt Rheology
CHE 770-771 Selected Topics in Polymer Science and Engineering III-IV
CHE 682 Colloids and Interfacial Phenomena