Christophe Pierre (cpierre)

Christophe Pierre

Professor and Jess H. Davis Endowed Chair

Edwin A. Stevens Hall 404
(201) 216-8250

Education

  • PhD (1985) Duke University (Mechanical Engineering and Materials Science)
  • MS (1984) Princeton University (Mechanical and Aerospace Engineering)
  • Diplôme d’Ingénieur (1982) Ecole Centrale des Arts et Manufactures de Paris (Aerospace Engineering)

Research

• Structural dynamics and vibrations
• Nonlinear dynamics
• Elastic wave propagation
• Aeroelasticity
• Vibration localization phenomena in disordered periodic structures
• Probabilistic structural dynamics with parameter uncertainties
• Mid- and high-frequency vibration transmission
• Dynamics of mistuned bladed-disk assemblies and rotating systems
• Normal modes and modal analysis for nonlinear systems
• Dynamics of dry-friction damped and non-smooth systems
• Automotive and aerospace structure applications
• Structural design and topology optimization

Experience

Jess H. Davis Endowed Chair in Mechanical Engineering, Stevens Institute of Technology, September 2021-present

Provost and Vice President for Academic Affairs, Stevens Institute of Technology, August 2016- August 2021

Professor, Department of Mechanical Engineering, Stevens Institute of Technology, August 2016-present

Vice President for Academic Affairs, University of Illinois, October 2011-August 2016

Professor, Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, October 2011-August 2016

Dean, Faculty of Engineering, McGill University, July 2005-October 2011

Professor, Department of Mechanical Engineering, McGill University, July 2005-October 2011

Canada Research Chair in Structural Dynamics and Vibration – Tier I, McGill University, October 2005-October 2011

Adjunct Professor, McGill University, October 2011-September 2013

Stephen P. Timoshenko Collegiate Professor of Mechanical Engineering, University of Michigan, March 2002-June 2005

Associate Dean for Academic Programs and Initiatives, Horace H. Rackham School of Graduate Studies, University of Michigan, 1999-2005 (50 percent appointment September 1999-August 2002; 75 percent appointment effective September 2002)

Professor of Mechanical Engineering, University of Michigan, 1997-2005

Associate Chairman, Department of Mechanical Engineering and Applied Mechanics, University of Michigan, 1996-1999

Chair, Mechanical Engineering Graduate Program, Rackham School of Graduate Studies, University of Michigan, 1996-1998

Director, Academic Services Office, Department of Mechanical Engineering, University of Michigan, 1996-1998

Associate Director, Automotive Research Center, College of Engineering, University of Michigan, 1994-2005

Associate Professor of Mechanical Engineering and Applied Mechanics, University of Michigan, 1991-1997

Assistant Professor of Mechanical Engineering and Applied Mechanics, University of Michigan

1985-1991, Adjunct Professor, 2005-2009

Professeur Invité, Ecole Centrale de Nantes, France, June-July 2010, July 2004, May 2003, February 2003, September-December 2001, November-December 2000

Professeur Invité, Ecole Centrale de Paris, August-December 1992

Graduate Research Assistant, Duke University, August 1983-August 1985

Graduate Research Assistant, Princeton University, July 1982-August 1983

Research Engineer, Avions Marcel Dassault-Breguet Aviation, France, March-July 1982

Institutional Service

  • Nominating Committee, Department of Mechanical Engineering Member

Professional Service

  • ENOC 2022 - 10th European Nonlinear Dynamics Conference Chair, Plenary Lecture Session
  • University Press of the Ecole Centrale Member, Editorial Board
  • International Journal of Reliability and Safety Member, Editorial Board
  • ASME Journal of Computational and Nonlinear Dynamics Associate Editor
  • ASME Applied Mechanics Reviews Member, Editorial Advisory Board
  • Nonlinear Dynamics Member, Advisory Board
  • AIAA Journal Associate Editor
  • ASME Journal of Vibration and Acoustics Associate Editor

Honors and Awards

Fellow, National Academy of Inventors, 2016

Doctorate Honoris Causa, Kharkov Polytechnic Institute (KhPI), National Technical University, Kharkov, Ukraine, October 2011.

Fellow, The American Academy of Mechanics, 2009.

N. O. Myklestad Award, The American Society of Mechanical Engineers, 2005.

Best Paper Award, ASME Design Engineering Division, Vehicle Design Committee, “Function-Oriented Material Design for Next-Generation Ground Vehicles,” ASME Paper IMECE2003-43326, 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, D.C.

Stephen P. Timoshenko Chaired Professorship, College of Engineering, University of Michigan, 2002.

College of Engineering Research Excellence Award, University of Michigan, 1998.

Fellow, The American Society of Mechanical Engineers.

Fellow, Committee on Institutional Cooperation, Academic Leadership Program (selected in 1997).

1995 Faculty Service Award, Department of Mechanical Engineering and Applied Mechanics, University of Michigan.

1993 Faculty Research Award, Department of Mechanical Engineering and Applied Mechanics, University of Michigan.

Exxon Foundation Award for Outstanding Teaching by an Assistant Professor, Department of Mechanical Engineering and Applied Mechanics, University of Michigan, 1986.

Professional Societies

  • American Society for Engineering Education Member
  • American Academy of Mechanics Fellow
  • American Society of Mechanical Engineers Fellow
  • Ordre des Ingénieurs du Québec Fellow
  • American Institute of Aeronautics and Astronautics Senior member

Selected Publications

Citation Report (from Scopus on January 26, 2022)
• Sum of the times cited without self-citations: 8,300
• h-index: 50

Articles and Notes in Refereed Journals

C. Pierre and E.H. Dowell, “A Study of Dynamic Instability of Plates by an Extended Incremental
Harmonic Balance Method,” ASME Journal of Applied Mechanics, Vol. 52, No. 3, 1985, pp. 693-697.

C. Pierre, A.A. Ferri, and E.H. Dowell, “Multi-Harmonic Analysis of Dry Friction Damped Systems Using an Incremental Harmonic Balance Method,” ASME Journal of Applied Mechanics, Vol. 52, No. 4, 1985, p. 958-964.

C. Pierre and E.H. Dowell, “Localization of Vibrations by Structural Irregularity,” Journal of Sound and Vibration, Vol. 114, No. 3, 1987, pp. 594-564.

C. Pierre, D.M. Tang, and E.H. Dowell, “Localized Vibrations of Disordered Multi-Span Beams: Theory and Experiment,” AIAA Journal, Vol. 25, No. 9, 1987, pp. 1249-1257.

C. Pierre, “Eigensolution Perturbation for Systems with Perturbed Boundary Conditions,” Journal of Sound and Vibration, Vol. 112, No. 1, 1987, pp. 167-172.

C. Pierre, “Comments on Rayleigh’s Quotient and Perturbation Theory for the Eigenvalue Problem,”ASME Journal of Applied Mechanics, Vol. 55, No. 4, 1988, pp. 986-988

P.D. Cha and C. Pierre, “Eigensolution of Periodic Assemblies of Multi-Mode Component Systems,”Journal of Sound and Vibration, Vol. 129, No. 1, 1989, pp. 168-174.

C. Pierre and R.H. Plaut, “Curve Veering and Mode Localization in a Buckling Problem,” Journal of Applied Mathematics and Physics (ZAMP), Vol. 40, 1989, pp. 758-761.

S.T. Wei and C. Pierre, “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry. Part I: Free Vibrations,” ASME Journal of Vibration, Acoustics, Stress and Reliability Design, Vol. 110, No. 4, 1988, pp. 429-438.

S.T. Wei and C. Pierre, “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry. Part II: Forced Vibrations,” ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 110, No. 4, 1988, pp. 439-449.

C. Pierre and P.D. Cha, “Strong Mode Localization in Nearly Periodic Disordered Structures,” AIAA Journal, Vol. 27, No. 2, 1989, pp. 227-241.

C. Pierre, “Mode Localization and Eigenvalue Loci Veering Phenomena in Disordered Structures,”Journal of Sound and Vibration, Vol. 126, No. 3, 1988, pp. 485-502.

C. Pierre, “Root Sensitivity to Parameter Uncertainties: A Statistical Approach,” International Journal of Control, Vol. 49, No. 2, 1983, pp. 521-532.

S.T. Wei and C. Pierre, “Effects of Dry Friction Damping on the Occurrence of localized Forced Vibrations in Nearly Cyclic Structures,” Journal of Sound and Vibration, Vol. 129, No. 3, 1989, pp. 397-416.

C. Pierre, “Weak and Strong Vibration Localization in Disordered Structures: A Statistical Investigation,” Journal of Sound and Vibration, Vol. 139, No. 1, 1990, pp. 111-132.

S.T. Wei and C. Pierre, “Statistical Analysis of the Effects of Mistuning on the Forced Response of Cyclic Assemblies,” AIAA Journal, Vol. 28, No. 5, 1990, pp. 861-868.

M.-H. H. Shen and C. Pierre, “Natural Modes of Bernoulli-Euler Beams with Symmetric Cracks,”Journal of Sound and Vibration, Vol. 138, No. 1, 1990, pp. 115-134.

P.D. Cha and C. Pierre, “Vibration Localization by Disorder in Assemblies of Mono-Coupled, Multi-Mode Component Systems,” ASME Journal of Applied Mechanics, Vol. 58, No. 4, 1991, pp. 1072-1081.

S.W. Shaw and C. Pierre, “Normal Modes and Invariant Manifolds,” Journal of Sound and Vibration, Vol. 150, 1991, pp. 170-173.

M.-H. H. Shen and C. Pierre, “Free Vibrations of Beams with a Single-Edge Crack,” Journal of Sound and Vibration, Vol. 170, No. 2, 1994, pp. 237-259.

D. Bouzit and C. Pierre, “Vibration Confinement Phenomena in Disordered, Mono-Coupled, Multi-Span Beams,” ASME Journal of Vibration and Acoustics, Vol. 114, 1992, pp. 521-530.

S.H. Choi, C. Pierre, and A.G. Ulsoy, “Consistent Modeling of Rotating Timoshenko Shafts Subject to Axial Loads,” ASME Journal of Vibration and Acoustics, Vol. 114, 1992, pp. 249-259.

S.W. Shaw and C. Pierre, “Normal Modes for Nonlinear Vibratory Systems,” Journal of Sound and Vibration, Vol. 164, No. 1, 1993, pp. 85-124.

C. Pierre and S.W. Shaw, “Mode Localization due to Symmetry-Breaking Nonlinearities,” International Journal of Bifurcation and Chaos, Vol. 1, No. 2, 1991, pp. 471-475.

C. Pierre and D.V. Murthy, “Aeroelastic Modal Characteristics of Mistuned Blade Assemblies: Mode Localization and Loss of Eigenstructure,” AIAA Journal, Vol. 30, No. 10, 1992, pp. 2483-2496.

C. Pierre, T.E. Smith, and D.V. Murthy, “Localization of Aeroelastic Modes in Mistuned High-Energy Turbines,” Journal of Propulsion and Power, Vol. 10, No. 3, 1994, pp. 318-328.

S.W. Shaw and C. Pierre, “Normal Modes of Vibration for Nonlinear Continuous Systems,” Journal of Sound and Vibration, Vol. 169, No. 3, 1994, pp. 319-347.

M.P. Castanier and C. Pierre, “Individual and Interactive Mechanisms for Localization and Dissipation in a Mono-Coupled Nearly Periodic Structure,” Journal of Sound and Vibration, Vol. 168, No. 3, 1993, pp. 479-506.

S.R. Hsieh, S.W. Shaw, and C. Pierre, “Normal Modes for Large Amplitude Vibration of a Cantilever Beam,” International Journal of Solids and Structures, Vol. 31, No. 14, 1994, pp. 1981-2014.

N. Al-jawi, C. Pierre, and A.G. Ulsoy, “Vibration Localization in Dual-Span, Axially Moving Beams. Part I: Formulation and Results,” Journal of Sound and Vibration, Vol. 179, No. 2, 1995, pp. 243-266.

N. Al-jawi, C. Pierre, and A.G. Ulsoy, “Vibration Localization in Dual-Span, Axially Moving Beams. Part II: Perturbation Analysis,” Journal of Sound and Vibration, Vol. 179, No. 2, 1995, pp. 267-287.

N. Al-jawi, A.G. Ulsoy, and C. Pierre, “Vibration Localization in Band/Wheel Systems: Theory and Experiment,” Journal of Sound and Vibration, Vol. 179, No. 2, 1995, pp. 289-312.

M.P. Castanier and C. Pierre, “Lyapunov Exponents and Localization Phenomena in Multi-Coupled Nearly-Periodic Systems,” Journal of Sound and Vibration, Vol. 183, No. 3, 1995, pp. 493-515.

D. Bouzit and C. Pierre, “Localization of Vibration in Disordered Multi-Span Beams with Damping,”Journal of Sound and Vibration, Vol. 187, No. 4, 1995, pp. 625-648.

D. Bouzit and C. Pierre, “An Experimental Investigation of Vibration Localization in Disordered Multi-Span Beams,” Journal of Sound and Vibration, Vol. 187, No. 4, 1995, pp. 649-669.

G. Ottarsson and C. Pierre, “A Transfer Matrix Approach to Free Vibration Localization in Mistuned Blade Assemblies,” Journal of Sound and Vibration, Vol. 197, No. 5, 1996, pp. 589-618.

N. Boivin, C. Pierre, and S.W. Shaw, “Non-Linear Normal Modes, Invariance, and Modal Dynamics Approximations of Non-Linear Systems,” Nonlinear Dynamics, Vol. 8, No. 3, 1995, pp. 315-346.

D. Murthy, C. Pierre, and G. Ottarsson, “Efficient Design Constraint Accounting for Mistuning Effects in Engine Rotors,” AIAA Journal, Vol. 33, No. 5, 1995, pp. 960-962.

N. Boivin, C. Pierre, and S.W. Shaw, “Non-Linear Modal Analysis of Structural Systems Featuring Internal Resonances,” Journal of Sound and Vibration, Vol. 182, No. 2, 1995, pp. 336-341.

P.D. Cha and C. Pierre, “A Statistical Investigation of the Forced Response of Finite, Nearly Periodic Assemblies,” Journal of Sound and Vibration, Vol. 203, No. 1, 1997, pp. 158-168.

M.P. Castanier and C. Pierre, “Predicting Localization Via Lyapunov Exponent Statistics,” Journal of Sound and Vibration, Vol. 203, No. 1, 1997, pp. 151-157.

P.D. Cha and C. Pierre, “Free Vibrations of Uniform Timoshenko Beams with Lumped Attachment,”Journal of Sound and Vibration, Vol. 211, No. 2, 1998, pp. 273-276.

G. Ottarsson and C. Pierre, “Vibration and Wave Localization in a Nearly Periodic Beaded String,”Journal of the Acoustical Society of America, Vol. 101, No. 6, 1997, pp. 3430-3442.

M.P. Castanier, G. Ottarsson, and C. Pierre, “A Reduced-Order Modeling Technique for Mistuned Bladed Disks,” ASME Journal of Vibration and Acoustics, Vol. 119, No. 3, 1997, pp. 439-447.

C. Pierre, M.P. Castanier, and W.-J. Chen, “Wave Localization in Multi-Coupled Periodic Structures: Application to Truss Beams,” ASME Applied Mechanics Reviews, Vol. 49, No. 2, 1996, pp. 65-86.

(Invited)
G. Ulsoy, C. Pierre, and S. Choi, “Vibration Localization in Rotating Shafts. Part I: Theory,” ASME Journal of Vibration and Acoustics, Vol. 120, No. 1, 1998, pp. 138-148.

G. Ulsoy, C. Pierre, and S. Choi, “Vibration Localization in Rotating Shafts. Part II: Experiment,” ASME Journal of Vibration and Acoustics, Vol. 120, No. 1, 1998, pp. 149-155.

J.A. Morgan, C. Pierre, and G.M. Hulbert, “Calculation of Component Mode Synthesis Matrices from Measured Frequency Response Functions. Part I: Theory,” ASME Journal of Vibration and Acoustics, Vol. 120, No. 2, 1998, pp. 503-508.

J.A. Morgan, C. Pierre, and G.M. Hulbert, “Calculation of Component Mode Synthesis Matrices from Measured Frequency Response Functions. Part II: Application,” ASME Journal of Vibration and Acoustics, Vol. 120, No. 2, 1998, pp. 509-516.

J.A. Morgan, C. Pierre, and G.M. Hulbert, “Forced Response of Coupled Substructures Using Experimentally-Based Component Mode Synthesis,” AIAA Journal, Vol. 35, No. 2, 1997, pp. 334-339.

C. Pierre, M.P. Castanier, and S.-B. Choi, “On Developing New Statistical Energy Methods for the Analysis of Vibration Transmission in Complex Vehicle Structures,” Mechanics of Structures and Machines, Vol. 25, No. 1, 1997, pp. 87-101.

H.H. Yoo, C. Pierre, and R.R. Ryan, “A New Formulation for the Torsional Vibration Analysis of Rotating Cantilever Rods,” KSME International Journal, Vol. 11, No. 2, 1997, pp. 143-154.

R. Bladh, M.P. Castanier, and C. Pierre, “Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies with Shrouds,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 121, No. 3, 1999, pp. 515-522.

P.D. Cha and C. Pierre, “Frequency Analysis of a Linear Elastic Structure Carrying a Chain of Oscillators,” Journal of Engineering Mechanics, Vol. 125, No. 5, 1999, pp. 587-591.

C. Pierre, S.W. Shaw, and E. Pesheck, “Modal Analysis-Based Reduced-Order Models for Nonlinear Structures—An Invariant Manifold Approach,” Shock and Vibration Digest, Vol. 31, No. 1, 1999, pp. 3-16 (invited review article).

P.D. Cha and C. Pierre, “Imposing Nodes to the Normal Modes of a Linear Elastic Structure,” Journal of Sound and Vibration, Vol. 219, No. 4, 1999, pp. 669-687.

J.A. Morgan, C. Pierre, and G.M. Hulbert, “Non-Baseband Residual Flexibility Method of Component Mode Synthesis for Proportionally Damped Systems,” AIAA Journal, Vol. 37, No.10, 1999, pp. 1285-1291.

D. Bouzit and C. Pierre, “Wave Localization and Conversion Phenomena in Multi-Coupled Multi-Span Beams,” Chaos, Solitons and Fractals, Vol. 11, No. 10, 2000, pp. 1575-1596. (Invited paper for special issue on Localization Problems in Engineering)

E. Pesheck, N. Boivin, C. Pierre, and S.W. Shaw, “Nonlinear Modal Analysis of Structural Systems Using Multi-Mode Invariant Manifolds,” Nonlinear Dynamics, Vol. 25, Nos. 1-3, 2001, pp. 183-205.

C. Pierre and 12 co-authors, “Modeling and Simulation of an M1 Abrams Tank with Advanced Track Dynamics and Integrated Virtual Diesel Engine,” Mechanics of Structures and Machines, Vol. 27, No. 4, 1999, pp. 453-505.

J.A. Judge, C. Pierre, and O. Mehmed, “Experimental Investigation of Mode Localization and Forced Response Amplitude Magnification for a Mistuned Bladed Disk,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 123, No. 4, 2001, pp. 940-950.

R. Bladh, M.P. Castanier, and C. Pierre, “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part I: Theoretical Models,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 123, No. 1, 2001, pp. 89-99.

R. Bladh, M.P. Castanier, and C. Pierre, “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part II: Application,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 123, No. 1, 2001, pp. 100-108.

E. Pesheck, C. Pierre, and S.W. Shaw, “Accurate Reduced Order Models for a Simple Rotor Blade Model Using Nonlinear Normal Modes,” Mathematical and Computer Modelling, Vol. 33, 2001, pp. 1085-1097 (Special Rotorcraft Issue).

M.P. Castanier, Y.-C. Tan, and C. Pierre, “Characteristic Constraint Modes for Component Mode Synthesis,” AIAA Journal, Vol. 39, No. 6, 2001, pp. 1182-1187.

E. Pesheck, C. Pierre, and S.W. Shaw, “Modal Reduction of a Nonlinear Rotating Beam through Nonlinear Normal Modes,” ASME Journal of Vibration and Acoustics, Vol. 124, No. 2, 2002, pp. 229-236.

E. Pesheck, C. Pierre, and S.W. Shaw, “A New Galerkin-based Approach for Accurate Nonlinear Normal Modes through Invariant Manifolds,” Journal of Sound and Vibration, Vol. 249, No. 5, 2002, pp. 971-993.

R. Bladh, M.P. Castanier, and C. Pierre, “Effects of Multistage Coupling and Disk Flexibility on Mistuned Bladed Disk Dynamics,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 125, No. 1, 2003, pp. 121-130.

R. Bladh, C. Pierre, M.P. Castanier, and M.J. Kruse, “Dynamic Response Predictions for a Mistuned Industrial Turbomachinery Rotor Using Reduced Order Modeling,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 124, No. 2, 2002, pp. 311-324.

Y.-C. Tan, M.P. Castanier, and C. Pierre, “Approximation of Power Flow Between Two Coupled Beams Using Statistical Energy Methods,” ASME Journal of Vibration and Acoustics, Vol. 123, No. 4, 2001, pp.510-523.

M.-H. H. Shen and C. Pierre, “Authors’ Reply: Free Vibrations of Beams with a Single-Edge Crack,”Journal of Sound and Vibration, Vol. 244, 2001, pp. 737.

C. Pierre, “Localization (MS 99),” Encyclopedia of Vibration, Edited by S. G. Braun, D. J. Ewins, and S. S. Rao, Academic Press, London, 2001.

P. Apiwattanalunggarn, S.W. Shaw, C. Pierre, and D. Jiang, “Finite-Element-Based Nonlinear Modal Reduction of a Rotating Beam with Large-Amplitude Motion,” Journal of Vibration and Control, Vol. 9, 2003, pp. 235-263.

M. Legrand, D. Jiang, C. Pierre, and S.W. Shaw, “Nonlinear Normal Modes of a Rotating Shaft Based on the Invariant Manifold Method,” International Journal of Rotating Machinery, Vol. 10, No. 4, 2004, pp.319-335.

J.A. Morgan, C. Pierre, and G.M. Hulbert, “Baseband Methods of Component Mode Synthesis for Non-Proportionally Damped Systems,” Journal of Mechanical Systems and Signal Processing, Vol. 17, No. 3, 2003, pp. 589-598.

M.P. Castanier and C. Pierre, “Using Intentional Mistuning in the Design of Turbomachinery Rotors,” AIAA Journal, Vol. 40, No. 10, 2002, pp. 2077-2086.

N.H. Kim, J. Dong, K.K. Choi, N. Vlahopoulos, Z.-D. Ma, M.P. Castanier, and C. Pierre, “Design Sensitivity Analysis for Sequential Structural-Acoustic Problems,” Journal of Sound and Vibration, Vol. 263, No. 3, 2003, pp. 569–591.

R. Bladh, C. Pierre, and M.P. Castanier, “Numerical Instability of Classical Free-Interface Component Mode Synthesis Techniques,” AIAA Journal, Vol. 41, No. 8, 2003, pp.1621-1624.

H. Yoo and C. Pierre, “Modal Characteristic of a Rotating Rectangular Cantilever Plate,” Journal of Sound and Vibration, Vol. 259, No. 1, 2003, pp. 81–96.

J.A. Judge, S.L. Ceccio, and C. Pierre “Traveling-Wave Excitation and Optical Measurement Techniques for Non-Contacting Investigation of Bladed Disk Dynamics,” Shock and Vibration Digest, Vol. 35, No. 3, 2003, pp. 183-190.

S. Nacivet, C. Pierre, F. Thouverez, and L. Jézéquel, “A Lagrangian Frequency-Time Method for the Vibration of Dry-Friction-Damped Systems,” Journal of Sound and Vibration, Vol. 265, No. 1, 2003, pp.201-219.

D. Jiang, C. Pierre, and S.W. Shaw “Large-Amplitude Nonlinear Normal Modes of Piecewise Linear Systems,” Journal of Sound and Vibration, Vol. 272, 2004, pp. 869-891.

Y.-C. Tan, M.P. Castanier, and C. Pierre, “Power Flow Analysis of Complex Structures Using Characteristic Constraint Modes,” AIAA Journal, Vol. 43, No. 6, 2005, pp. 1360-1370.

Z.-D. Ma, H. Wang, N. Kikuchi, C. Pierre, and B. Raju, 2004, “Substructure Design Using a Multi-Domain Multi-Step Topology Optimization,” SAE Journal of Passenger Cars - Mechanical Systems, 2004, pp. 1349-1358.

C. Pierre, N. Vlahopoulos, Z.-D. Ma, M.P. Castanier, S.-Y. Lee, A. Wang, K.K. Choi, N.H. Kim, and J. Dong, “Advanced Structure Methodologies for Next-Generation Ground Vehicles, Part 1: Basic Theories,” International Journal of Heavy Vehicle Systems, Vol. 11, Nos. 3/4, 2004, pp. 257-281.

C. Pierre, N. Vlahopoulos, Z.-D. Ma, M.P. Castanier, S.-Y. Lee, A. Wang, K.K. Choi, N.H. Kim, and J. Dong, “Advanced Structure Methodologies for Next-Generation Ground Vehicles, Part 2: Case Study,”International Journal of Heavy Vehicle Systems, Vol. 11, Nos. 3/4, 2004, pp. 282-302.

P. Apiwattanalunggarn, S.W. Shaw, and C. Pierre, “Component Mode Synthesis Using Nonlinear Normal Modes,” Nonlinear Dynamics, Vol. 41, 2005, pp. 17-46.

D. Jiang, C. Pierre, and S.W. Shaw “The Construction of Nonlinear Normal Modes for Systems with Internal Resonance,” International Journal of Non-Linear Mechanics, Vol. 40, No. 5, 2005, pp. 729-746.

D. Jiang, C. Pierre, and S.W. Shaw “Nonlinear Normal Modes for Vibratory Systems under Harmonic Excitation,” Journal of Sound and Vibration, Vol. 288(4-5), 2005, pp. 791-812.

Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju, “Multidomain Topology Optimization for Structural and Material Designs,” ASME Journal of Applied Mechanics, Vol. 73 (4), 2006, pp. 565-573.

Z.-D. Ma, H. Wang, N. Kikuchi, C. Pierre, and B. Raju, “Experimental Verification and Prototyping of Optimum Designs Obtained from Topology Optimization,” Structural and Multidisciplinary Optimization, Vol. 31, No. 5, 2006, pp. 333-343.

C. Pierre, D. Jiang, and S.W. Shaw, “Nonlinear Normal Modes and their Application in Structural Dynamics,” Mathematical Problems in Engineering, Vol. 2006, Article ID 10847, 15 pages, 2006.

S.-H. Lim, C. Pierre, and M.P. Castanier, “Predicting Blade Stress Levels Directly from Reduced-Order Vibration Models of Mistuned Bladed Disks,” ASME Journal of Turbomachinery, Vol. 128, No. 1, 2006, pp. 206–210.

S.W. Shaw and C. Pierre, “The Dynamic Response of Tuned Impact Absorbers for Rotating Flexible Structures,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 1, No. 1, 2006, pp. 13-24.

M.P. Castanier and C. Pierre, “Modeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions,” AIAA Journal of Propulsion and Power, Vol. 22, No. 2, 2006, pp. 384–396.

M. Legrand, S. Roques, C. Pierre, B. Peseux, and P. Cartraud, “n-Dimensional Harmonic Balance Method Extended to Non-Explicit Nonlinearities,” European Journal of Computational Mechanics, Vol. 15, No. 1-3, 2006, pp. 269-280.

Z. He, B.I. Epureanu, and C. Pierre, “Fluid-Structural Coupling Effects on the Dynamics of Mistuned Bladed Disks”, AIAA Journal, Vol. 45, No. 3, 2007, pp.552-561.

Z. He, B.I. Epureanu, and C. Pierre, “Parametric Study of the Aeroelastic Response of Mistuned Bladed Disks”, Computers and Structures, Vol. 85, 2007, pp. 852-865.

A. Kozmin, Y. Mikhlin, and C. Pierre, “Transient in a two-DOF nonlinear system”, Nonlinear Dynamics, Vol. 51, Nos. 1-2, 2008, pp. 141-154.

K.V. Avramov, C. Pierre, and N. Shyriaieva, “Flexural−Flexural−Torsional Nonlinear Vibrations of Pre-Twisted Rotating Beams with Asymmetric Cross-Sections,” Journal of Vibration and Control, Vol. 13, No. 4, 2007, pp. 329-364.

A. Kozmin, Y. Mikhlin, and C. Pierre, “Localization of Energy in Nonlinear Systems with Two Degrees of Freedom”, International Applied Mechanics, Vol. 43, No. 5, 2007, pp. 568-576.

K.V. Avramov, C. Pierre, and N. Shiraeva, “Non-Linear Equations of Flexural−Flexural−Torsional Oscillations of Rotating Beams with Arbitrary Cross-Section,” International Applied Mechanics, Vol. 44, No. 5, 2008, pp. 582-589.

S.-Y. Lee, M.P. Castanier, and C. Pierre, “Statistical Approximations of Vibration Power Flow for Complex Structures with Uncertainties,” International Journal of Reliability and Safety, Vol. 1, No. 3, 2007, pp. 260-289.

S.-H. Lim, R. Bladh, M.P. Castanier, and C. Pierre, “Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibration,” AIAA Journal, Vol. 45, No. 9, 2007, pp. 2285-2298.

Z. He, B.I. Epureanu, and C. Pierre: “Convergence Predictions for Aeroelastic Calculations of Tuned and Mistuned Tuned Bladed Disks”, Journal of Fluids and Structures, Vol. 24, 2008, pp. 732-749.

M. Legrand, C. Pierre, P. Cartraud, and J.-P. Lombard, “Two-Dimensional Modeling of an Aircraft Engine Structural Bladed Disk-Casing Modal Interaction,” Journal of Sound and Vibration, Vol. 319, No.1-2, 2009, pp. 366-391.

A. Saito, M.P. Castanier, C. Pierre, and O. Poudou, “Efficient Nonlinear Vibration Analysis of the Forced Response of Rotating Cracked Blades,” ASME Journal of Computational and Nonlinear Dynamics, Vol.4, No.1, January 2009, pp. 011005-1 – 011005-10.

V. Ganine, M. Legrand, H. Michalska, and C. Pierre, “A Sparse Preconditioned Iterative Method for Vibration Analysis of Geometrically Mistuned Bladed Disks,” Computers and Structures, Vol. 87, No. 5-6, 2009, pp. 342-354.

M. Legrand, C. Pierre, and B. Peseux, “Structural Modal Interaction of a Four Degree-of-Freedom Bladed Disk and Casing Model,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 5, No. 4, 2010, 041013 (9 pages).

J.A. Judge, C. Pierre, and S.L. Ceccio, “Experimental Mistuning Identification in Bladed Disks using a Component-Mode-Based Reduced-Order Model,” AIAA Journal, Vol. 47, No. 5, 2009, pp. 1277-1287.

K.V. Avramov, O.S. Galas, O.K. Morachkovskii, and C. Pierre, “Analysis of Flexural-Flexural-Torsional Nonlinear Vibrations of Twisted Rotating Beams with Cross-Sectional Deplanation, Strength of Materials, Vol. 41, No. 2, 2009, pp. 200-208.

A. Saito, M.P. Castanier and C. Pierre, “Effects of a Cracked Blade on Mistuned Turbine Engine Rotor Vibration,” ASME Journal of Vibration and Acoustics, Vol. 131, No. 6, 2009, pp. 061006.

A. Saito, M.P. Castanier and C. Pierre, “Estimation and Veering Analysis of Nonlinear Resonant Frequencies of Cracked Plates,” Journal of Sound and Vibration, Vol. 326, No. 3-5, 2009, pp. 725-739.

S. Roques, M. Legrand, P. Cartraud, C. Stoisser and C. Pierre, “Modeling of a Rotor Speed Transient Response with Radial Rubbing,” Journal of Sound and Vibration, Vol. 329, No. 5, 2010, pp. 527-546.

M. Legrand and C. Pierre, « Modélisation Plastique Bi-linéaire de l’Usure de Matériaux Abradables:Application aux Turbo-machines, » Mécanique & Industries, Vol. 11, No. 3-4, 2010, pp. 283-288.

A. Saito, B. Epureanu, M.P. Castanier and C. Pierre, “Node Sampling for Nonlinear Vibration Analysis of Structures with Intermittent Contact,” AIAA Journal, Vol. 48, No. 9, 2010, pp. 1903-1915.

D. Laxalde and C. Pierre, “Modeling and Analysis of Multi-Stage Systems of Mistuned Bladed Disks,”Computers and Structures, Vol. 89, 2011, pp. 316-324.

V. Ganine, D. Laxalde, H. Michalska and C. Pierre, “Parameterized Reduced Order Modeling of Misaligned Stacked Disks Rotor Assemblies,” Journal of Sound and Vibration, Vol. 330, No. 3, 2011, pp.445-460.

A. Batailly, M. Legrand, P. Cartraud and C. Pierre, “Assessment of Reduced Models for the Detection of Modal Interaction through Rotor Stator Contacts,” Journal of Sound and Vibration, Vol. 329, No. 26, 2010, pp. 5546-5562.

M. Legrand, A. Batailly and C. Pierre, “Numerical Investigation of Abradable Coating Removal through Plastic Constitutive Law in Aircraft Engine,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 7, No. 1, 2011.

M. Legrand, A. Batailly, B. Magnain, P. Cartraud, and C. Pierre, “Full Three-Dimensional Investigation of Structural Contact Interactions in Turbomachines,” Journal of Sound and Vibration, Vol. 331, No. 11, 2012, pp. 2578-2601.

K.V. Avramov, E.A. Strelnikova, and C. Pierre, “Resonant Many-Mode Periodic and Chaotic Self-Sustained Aeroelastic Vibrations of Cantilever Plates with Geometrical Non-Linearities in Incompressible Flow,” Nonlinear Dynamics, Vol. 70, No. 2, 2012, pp. 1335-1354.

S. Gozen, B.J. Olson, S.W. Shaw, and C. Pierre, “Resonance Suppression in Multi-Degree-of-Freedom Rotating Flexible Structures Using Order-Tuned Absorbers,” ASME Journal of Vibration and Acoustics, Vol. 134, No. 6, 2012, article number 061016.

N.V. Perepelkin, Y.V. Mikhlin, and C. Pierre, “Non-linear Normal Forced Vibration Modes in Systems with Internal Resonance,” International Journal of Non-linear Mechanics, Vol. 57, 2013, pp. 102-115.

M.B. Meingast, M. Legrand, and C. Pierre, “A Linear Complementarity Problem Formulation for Periodic Solutions to Unilateral Contact Problems,” International Journal of Non-linear Mechanics, Vol.66, 2014, pp. 18-27.

B.J. Olson, S.W. Shaw, C.Z. Shi, C. Pierre, and R.G. Parker, “Circulant Matrices and their Application to Vibration Analysis,” Applied Mechanics Reviews, Vol. 66, No. 4, 2014, article number 040803.

A. Batailly, M. Legrand and C. Pierre, “Full 3D Rotor/Stator Interaction Simulations in Aircraft Engines with Time-Dependent Angular Speed,” Journal of Engineering for Gas Turbines and Power, Vol. 139, No.3, Paper No. GTP-16-1337, 2017.

Book Reviews

C. Pierre, Review of Normal Modes and Localization in Nonlinear Systems, by A. F. Vakakis et al., ASME Applied Mechanics Reviews, Vol. 51, No. 5, 1998, p. B42.

C. Pierre, Review of Asymptotic Approaches in Nonlinear Dynamics, by J. Awrejcewicz et al., ASME Applied Mechanics Reviews, Vol. 53, No. 2, 2000, pp. B11-B12.

C. Pierre, Review of Mechanics and Dynamical Systems with Mathematicaâ, by N. Bellomo et al., ASME Applied Mechanics Reviews, Vol. 54, No. 1, 2001, pp. B4-B5.

C. Pierre, Review of Infinite-Dimensional Dynamical Systems: An Introduction to Dissipative Parabolic PDEs and the Theory of Global Attractors, by J.C. Robinson, ASME Applied Mechanics Reviews, Vol. 56, No. 4, 2003, p. B54.

Chapters in Books and Books Edited

[with E.H. Dowell] “Chaotic Oscillations in Mechanical Systems,” in Chaos in Nonlinear Dynamical Systems, Edited by J. Chandra, SIAM, 1985.

“Vibration Localization by Disorder—A Viable Alternative to Damping?” in Elastic Wave Propagation and Ultrasonic Nondestructive Evaluation, S. K. Datta, J. D. Achenbach and Y. S. Rajapakse (Editors), Elsevier Science Publishers B. V. (North-Holland), 1990.

Structural Dynamics of Complex and Large Scale Systems, ASME DE-Vol. 59 (Proceedings of the 14th Biennial Conference on Mechanical Vibrations and Noise), Edited by C. Pierre and N.C. Perkins, 1993.

Aerospace Structures: Nonlinear Dynamics and System Response, ASME AD-Vol. 33 (Proceedings of the 1993 Winter Annual Meeting), Edited by J.P. Cusumano, C. Pierre, and S.T. Wu, 1993.

[with S.W. Shaw] “Normal Modes and Modal Analysis Techniques for Nonlinear Structural Systems,” in Nonlinear Dynamics and Stochastic Mechanics, CRC Mathematical Modeling Series, 95-119, N. Sri Namachchivaya and W. Kliemann (Editors), CRC Press, 1995.

[with J. Guillen] “An Efficient, Hybrid, Frequency-Time Domain Method for the Dynamics of Large-Scale Dry-Friction Damped Structural Systems,” IUTAM Symposium on Unilateral Multibody Contacts, Edited by F. Pfeiffer and Ch. Glocker, Kluwer Academic Publishers (Dordrecht), 1999.

“Localization Phenomena in Structural Dynamics,” in Stability of Gyroscopic Systems, Series on Stability, Vibration and Control of Systems, Series A, Vol. 2, Edited by A. Guran, A. Bajaj, Y. Ishida, N. Perkins, G. D’Eleuterio, and C. Pierre, World Scientific Publishing, Singapore, 1999.

Papers in Refereed Conference or Symposium Proceedings

“Computational Methods for Structural Systems with Statistical Properties,” NSF Study on Supercomputers in Mechanical Systems Research, Livermore, California, September 12-14, 1984.

[with Tang, D. M., and Dowell, E. H.] “Localized Vibrations of Disordered Multi-Span Beams: Theory and Experiment,” 27th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, May 19-21, 1986, San Antonio, Texas.

“Localized Free and Forced Vibrations of Nearly Periodic Disordered Structures,” 28th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 6-9, 1987, Monterey, California.

“Mode Localization and Eigenvalue Loci Veering Phenomena in Disordered Structures,” 20th Midwestern Mechanics Conference, August 31-September 2, 1987, Purdue University, West Lafayette, Indiana.

[with Wei, S. T.] “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry. Part I: Free Vibrations,” and “...Part II: Forced Vibrations,” 11th Biennial ASME Conference on Vibrations and Noise, September 27-30, 1987, Boston. In Bladed Disk Assemblies, DE-Vol 6, Edited by R. Kielb, pp. 61-79.

“Weak and Strong Vibration Localization in Disordered Structures: A Statistical Investigation,” 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 18-20, 1988, Williamsburg, Virginia.

“Localization of Vibrations by Structural Irregularity,” Dynamic Systems and Control Program Review, National Science Foundation, Washington, D. C., June 8, 1988 (invited contribution).

[with Wei, S. T.] “A Statistical Analysis of the Effects of Mistuning on the Forced Response of Cyclic Assemblies,” 30th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 3-5, 1989, Mobile, Alabama.

“Damping-Like Effects of Random Irregularities in Periodic Structures,” 12th Canadian Congress of Applied Mechanics (CANCAM '89), Ottawa, Canada, May 28-June 2, 1989.

[with Cha, P. D.] “Vibration Localization by Disorder in Assemblies of Mono-Coupled, Multi-Mode Component Systems,” AIAA Dynamics Specialists Conference, April 5-6, 1990, Long Beach, California.

[with Shen, M.-H. H.] “Natural Modes of Bernoulli-Euler Beams with a Single-Edge Crack,” 31th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 2-4, 1990, Long Beach, California.

[with Chen, W.-J.] “Exact Linear Dynamics of Periodic and Disordered Truss Beams: Localization of Normal Modes and Harmonic Waves,” AIAA paper 91-1114, 32nd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 8-10, 1991, Baltimore, Maryland.

[with Murthy, D. V.] “Aeroelastic Modal Characteristics of Mistuned Blade Assemblies: Mode Localization and Loss of Eigenstructure,” AIAA paper 91-1218, 32nd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 8-10, 1991, Baltimore, Maryland; Also
NASA Technical Memorandum 104519.

[with Smith, T. E., and Murthy, D. V.] “Localization of Aeroelastic Modes in Mistuned High-Energy Turbines,” AIAA paper 91-3379, 27th AIAA/ASME Joint Propulsion Conference, June 24-27, 1991, Sacramento, California; Also NASA Technical Memorandum 104445.

[with Castanier, M. P.] “Individual and Interactive Mechanisms for Localization and Dissipation in a Mono-Coupled Nearly Periodic Structure,” AIAA paper 92-2212, Proceedings of the 33rd AIAA/ASME Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992.

[with Chen, W.-J.] “Vibration Localization and Wave Conversion Phenomena in a Multi-Coupled, Nearly Periodic, Disordered Truss Beam,” AIAA paper 92-2115, Proceedings of the AIAA Dynamics Specialists Conference, Dallas, Texas, April 16-17, 1992.

[with Murthy, D. V.] “Stochastic Sensitivity Measure for Mistuned High-Performance Turbines,” Fourth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-4), Honolulu, Hawaii, April 5-9, 1992. Also NASA Technical Memorandum 105821.

[with Shaw, S. W.] “On Nonlinear Normal Modes,” Invited Paper, in Nonlinear Vibrations, DE-Vol. 50, AMD-Vol. 144, edited by R. A. Ibrahim et al., Proceedings of the 1992 ASME Winter Annual Meeting, Anaheim, California.

[with Murthy, D V., and Ottarsson, G.] “An Efficient Constraint to Account for Mistuning Effects in the Optimal Design of Engine Rotors,” AIAA Paper 92-4711, Fourth AIAA/USAF/NASA Symposium on Multidisciplinary Analysis and Optimizations, September 21-23, 1992, Cleveland, Ohio.

[with Ottarsson, G.] “Vibration Localization in Mono- and Bi-Coupled Mistuned Bladed Disks—A Transfer Matrix Approach,” AIAA Paper 93-1492, 34th AIAA/ASME Structures, Structural Dynamics and Materials Conference, La Jolla, California, April 1993.

[with Bouzit, D.] “An Experimental Investigation of Vibration Localization in Disordered Multi-Span Beams,” AIAA Paper 93-1487, 34th AIAA/ASME Structures, Structural Dynamics and Materials Conference, La Jolla, California, April 1993.

[with Ottarsson, G.] “A Transfer Matrix Approach to Vibration Localization in Mistuned Blade Assemblies,” ASME Paper 93-GT-115, Proceedings of the ASME Gas Turbine Conference, Cincinnati, Ohio, May 1993.

[with Murthy, D. V.] “Aeroelastic Dynamics of Mistuned Blade Assemblies with Closely-Spaced Blade Modes,” AIAA Paper 93-1628, 34th AIAA/ASME Structures, Structural Dynamics and Materials Conference, La Jolla, California, April 1993.

[with Castanier, M. P.] “Lyapunov Exponents and Localization Phenomena in Multi-Coupled Nearly-Periodic Systems,” in Structural Dynamics of Large Scale and Complex Systems, ASME DE-Vol. 59, Edited by C. Pierre and N. C. Perkins, Proceedings of the 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 1993.

[with Boivin, N., and Shaw, S. W.] “Non-Linear Normal Modes, Invariance, and Modal Dynamics Approximations of Non-Linear Systems,” in Nonlinear Vibrations, ASME DE-Vol. 54, Edited by R.A. Ibrahim et al., Proceedings of the 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 1993.

[with Bouzit, D.] “Localization of Vibration in Disordered Multi-Span Beams with Damping,” in Structural Dynamics of Large Scale and Complex Systems, ASME DE-Vol. 59, Edited by C. Pierre and N. C. Perkins, Proceedings of the 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 1993.

[with Al-jawi, A. N., and Ulsoy, A. G.] “Vibration Localization in Band/Wheel Systems: Theory and Experiment,” in Structural Dynamics of Large Scale and Complex Systems, ASME DE-Vol. 59, Edited by C. Pierre and N. C. Perkins, Proceedings of the 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 1993.

[with Al-jawi, A. N., and Ulsoy, A. G.] “Vibration Localization in Dual-Span, Axially
Moving Beams: Formulation and Results,” in Structural Dynamics of Large Scale and Complex Systems, ASME DE-Vol.59, Edited by C. Pierre and N. C. Perkins, Proceedings of the 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 1993.

[with Bouzit, D.] “Wave Localization and Conversion Phenomena in Multi-Coupled Multi-Span Beams,” in Aerospace Structures: Nonlinear Dynamics and System Response, ASME AD-Vol. 33, Edited by J.P. Cusumano et al., Proceedings of the 1993 ASME Winter Annual Meeting, New Orleans, Louisiana, December 1993.

[with Ottarsson, G., and Castanier, M. P.] “A Reduced-Order Modeling Technique for Mistuned Bladed Disks,” AIAA Paper 94-1640, 35th AIAA/ASME Structures, Structural Dynamics and Materials Conference, Hilton Head, South Carolina, April 1994.

[with Boivin, N., and Shaw, S. W.] “Nonlinear Modal Analysis of Structural Systems Using Multi-Mode Invariant Manifolds,” AIAA Paper 94-1672, Dynamics Specialists Conference, Hilton Head, South Carolina, April 1994.

[with Ottarsson, G.] “On the Effects of Interblade Coupling on the Statistics of Maximum Forced Response Amplitudes in Mistuned Bladed Disks,” AIAA Paper 95-1494, 36th AIAA/ASME Structures, Structural Dynamics and Materials Conference, New Orleans, LA, April 10-13, 1995.

[with Morgan, J. A., and Hulbert, G. M.] “Calculation of Component Mode Synthesis Matrices from Measured Frequency Response Functions,” ASME DE-Vol. 84-1, Volume 3—Part B, Proceedings of the 15th Biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, September 1995.

[with Ulsoy, A. G., and Choi, S.] “Vibration Localization in Rotating Shafts. Part I: Theory,” ASME DEVol.84-1, Volume 3—Part C, Proceedings of the 15th Biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, September 1995.

[with Ulsoy, A. G., and Choi, S.] “Vibration Localization in Rotating Shafts. Part II: Experiment, ”ASME DE-Vol. 84-1, Volume 3—Part C, Proceedings of the 15th Biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, September 1995.

[with Kruse, M. J.] “Forced Response of Mistuned Bladed Disks Using Reduced-Order Modeling,” AIAA Paper 96-1545, 37th AIAA/ASME Structures, Structural Dynamics and Materials Conference, Salt Lake City, Utah, April 1996.

[with Castanier, M. P.] “Predicting Localization Phenomena via Lyapunov Exponent Statistics,” AIAA Paper 96-1243, AIAA Dynamics Specialists Conference, Salt Lake City, Utah, April 1996.

[with Boivin, N., and Shaw, S. W.] “Non-Linear Modal Analysis of the Forced Response of Structural Systems,” AIAA Paper 96-1250, AIAA Dynamics Specialists Conference, Salt Lake City, Utah, April 1996.

[with Kruse, M. J.] “Dynamic Response of an Industrial Turbomachinery Rotor,” AIAA Paper 96-2820, 32th AIAA/ASME Joint Propulsion Conference, Lake Buena Vista, Florida, July 1996.

[with Guillen, J.] “Analysis of the Forced Response of Dry-Friction Damped Structural Systems Using an Efficient Hybrid Frequency-Time Method,” Symposium on Nonlinear Dynamics and Controls, International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, November 1996.

[with M.J. Kruse] “An Experimental Investigation of Vibration Localization in Bladed Disks, Part I: Free Response,” ASME Paper 97-GT-501, Proceedings of the ASME Gas Turbine Conference, Orlando, Florida, June 1997.

[with M.J. Kruse] “An Experimental Investigation of Vibration Localization in Bladed Disks, Part II: Forced Response,” ASME Paper 97-GT-502 Proceedings of the ASME Gas Turbine Conference, Orlando, Florida, June 1997.

[with Choi, S., and Castanier, M. P.] “Statistical Energy Methods for Mid-Frequency Vibration Transmission Analysis,” SAE Paper 972010, Proceedings of the 1997 SAE Noise and Vibration Conference and Exposition, Traverse City, Michigan, May 1997.

[with Choi, S., and Castanier, M. P.] “A Parameter-Based Statistical Energy Method for Mid-Frequency Vibration Transmission Analysis,” Proceedings of the Sixth International Conference on Recent Advances in Structural Dynamics, Southampton, England, July 1997 (pp.1179-1194)

[with E. Pesheck] “An Analysis of a Friction Damped System Using Two Component Mode Methods, ”Proceedings of the 16th Biennial Conference on Mechanical Vibration and Noise, Sacramento, California, September 1997 (ASME paper DETC97/VIB-3844).

[with E. Pesheck] “Phase Space Interpretation and Stability Analysis of a Self-Excited, Friction Damped Turbine Airfoil,” Proceedings of the 16th Biennial Conference on Mechanical Vibration and Noise, Sacramento, California, September 1997 (ASME paper DETC97/VIB-3913).

[with E. Pesheck] “A Global Methodology for the Modal Reduction of Large Nonlinear Systems Containing Quadratic and Cubic Nonlinearities,” Proceedings of the 16th Biennial Conference on Mechanical Vibration and Noise, Sacramento, California, September 1997 (ASME paper DETC97/VIB-3952).

[with M.P. Castanier] “Consideration on the Benefits of Intentional Blade Mistuning for the Forced Response of Turbomachinery Rotors,” in Analysis and Design Issues for Modern Aerospace Vehicles, ASME Publication AD-Vol.55, pp. 419-425; Presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, November 1997.

[with R. Bladh and M.P. Castanier] “Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies with Shrouds,” ASME Paper 98-GT-484, Proceedings of the ASME Gas Turbine Conference (ASME Turbo Expo ’98), Stockholm, Sweden, June 1998.

[with M.P. Castanier] “Investigation of the Combined Effects of Intentional and Random Mistuning on the Forced Response of Bladed Disks,” AIAA Paper AIAA-98-3720, Proceedings of the 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cleveland, Ohio, July 1998.

[with Y.C. Tan and M.P. Castanier] “Approximations of Power Flow Between Two Coupled Beams Using Statistical Energy Methods,” in DE-Vol. 98, Dynamics, Acoustics and Simulations, ASME 1998, pp. 9-19. (Proceedings of the 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, California, November 1998.)

[with J. Guillen] “An Efficient, Hybrid Frequency-Time Domain Method for the Dynamics of Large-Scale Dry-Friction Damped Structural Systems,” IUTAM Symposium on Friction and Multi-Body Systems, Munich, Germany, August 3-7, 1998 (invited).

[with S.W. Shaw] “Invariant Manifolds and Model Reduction for Nonlinear Systems,” PANCAM VI/DINAME (Sixth Pan American Congress of Applied Mechanics / International Conference on Dynamic Problems in Mechanics), Rio de Janerio, Brazil, January 4-8, 1999 (invited).

[with Morgan, J. A., and Hulbert, G. M.] “Component Mode Synthesis Methods for Non-Proportionally Damped Systems,” Proceedings of the 17th International Modal Analysis Conference, Vol. II, pp. 1472-1480, Kissimmee, Florida, February 8-11, 1999.

[with Bladh, R., and Castanier, M. P.] “Models of Rotor Mistuning and the Prediction of Mistuned Blade Forced Response,” Proceedings of the 4th National Turbine Engine High Cycle Fatigue Conference, Monterey, California, February 9-11, 1999.

[with Tan, Y.-C., and Castanier, M. P.] “Modal Approximations of Power Flow Between Coupled Component Structures,” Proceedings of the 6th International Congress on Sound and Vibration, Technical University of Denmark, Lyngby, Denmark, July 5-8, 1999.

[with E. Pesheck and S.W. Shaw] “Model Reduction of a Nonlinear Rotating Beam Through Nonlinear Normal Modes,” Proceedings of the 17th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 1999 (ASME paper DETC99/VIB-8074).

[with M.E. Brewer and M.P. Castanier] “Effects of Harmonic Intentional Mistuning on the Free Response of Bladed Disks,” Proceedings of the 17th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 1999 (ASME paper DETC99/VIB-8012).

[with J. Guillen and T. Lagrange] “An Advanced Damper Model for the Dynamics of Dry Friction Damped Systems,” Proceedings of the 17th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 1999 (ASME paper DETC99/VIB-8083).

[with M.P. Castanier and Y.-C. Tan] “Characteristic Constraint Modes for Component Mode Synthesis,” Proceedings of the 17th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 1999 (ASME paper DETC99/VIB-8187).

[with J.A. Judge and O. Mehmed] “Experimental Investigation of Mode Localization and Forced Response Amplitude Magnification for a Mistuned Bladed Disk,” ASME Paper 00-GT-358, Proceedings of ASME Turbo Expo 2000, Munich, Germany, May 2000.

[with R. Bladh and M.P. Castanier] “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part I: Theoretical Models,” ASME Paper 00-GT-360, Proceedings of ASME Turbo Expo 2000, Munich, Germany, May 2000.

[with R. Bladh and M.P. Castanier] “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part II: Application,” ASME Paper 00-GT-361, Proceedings of ASME Turbo Expo 2000, Munich, Germany, May 2000.

[with Y.-C. Tan and M.P. Castanier] “Characteristic-Mode-Based Component Mode Synthesis for Power Flow Analysis in Complex Structures” AIAA paper 00-1470, Proceedings of the 41st AIAA Structures, Structural Dynamics, and Materials Conference, Atlanta, Georgia, April 2000.

[with Bladh, R., and Castanier, M. P.] “Component Mode Modeling of Mistuned Bladed Disk Vibration,” Proceedings of the 5th National Turbine Engine High Cycle Fatigue Conference, Chandler, Arizona, March 7-9, 2000.

[with Ceccio, S. L., Judge, J., and Cross, C. J.] “Experimental Investigations of Mistuned Bladed Disk Vibration,” Proceedings of the 5th National Turbine Engine High Cycle Fatigue Conference, Chandler, Arizona, March 7-9, 2000.

[with Tan, Y.-C., and Castanier, M.P.] “Efficient Reduced Order Modeling of Low- to Mid-Frequency Vibration and Power Flow in Complex Structures,” Proceedings of IMAC XIX: Conference on Structural Dynamics, Kissimmee, Florida, February 5-8, 2001.

[with R. Bladh and M.P. Castanier] “Effects of Multi-Stage Coupling and Disk Flexibility on Mistuned Bladed Disk Dynamics,” ASME paper 01-GT-0277, Proceedings of ASME Turbo Expo 2001, New Orleans, Louisiana, June 2001.

[with R. Bladh and M.P. Castanier] “Reduced Order Modeling Techniques for the Dynamic Analysis of Mistuned Multi-Stage Turbomachinery Rotors,” ASME paper 01-GT-0276, Proceedings of ASME Turbo Expo 2001, New Orleans, Louisiana, June 2001.

[with Judge, J., and Ceccio, S. L.] “Identification of Mistuning in Blisks,” Proceedings of the 6th National Turbine Engine High Cycle Fatigue Conference, Jacksonville, Florida, March 5-8, 2001.

[with Y.-C. Tan and M.P. Castanier] “Statistical Approximations for Characteristic-Mode-Based Power Flow Analysis in Complex Structures” AIAA paper 01-1713, Proceedings of the 42nd AIAA Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, April 2001.

[with D. Jiang, V. Soumier, and S.W. Shaw] “Large Amplitude Nonlinear Normal Modes of Piecewise Linear Systems,” Proceedings of the 18th Biennial Conference on Mechanical Vibration and Noise, Pittsburgh, Pennsylvania, September 2001 (ASME paper DETC2001/VIB-21734).

[with S. Nacivet, F. Thouverez and L. Jézéquel] “Analysis of Periodic Frictional Contact in Finite Element Problems,” Proceedings of the 18th Biennial Conference on Mechanical Vibration and Noise, Pittsburgh, Pennsylvania, September 2001 (ASME paper DETC2001/VIB-21735)

[with J.A. Judge and S.L. Ceccio] “Experimental Validation of Mistuning Identification Techniques and Vibration Predictions in Bladed Disks,” Proceedings of the International Forum on Aeroelasticity and Structural Dynamics–IFASD 2001, Madrid, Spain, June 5-7, 2001.

[with Y.-C. Tan, S.-Y. Lee, and M. P. Castanier] “Efficient Component-Based Vibration and Power Flow Analysis of a Vehicle Structure,” Proceedings of the 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, November 2001.

[with N. H. Kim, K. K. Choi, J. Dong, N. Vlahopoulos, Z. D. Ma, and M. P. Castanier] “A Sequential Adjoint Variable Method in Design Sensitivity Analysis of NVH Problems,” Proceedings of the 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, November 2001.

[with M. Legrand, D. Jiang, and S. W. Shaw] “Nonlinear Normal Modes of a Rotating Shaft Based on the Invariant Manifold Method,” Ninth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-9), Honolulu, Hawaii, February 10-14, 2002.

[with J.A. Judge, S. L. Ceccio, and M. P. Castanier] “Experimental Investigation of the Effects of Random and Intentional Mistuning on the Vibration of Bladed Disks,” Proceedings of the 7th National Turbine Engine High Cycle Fatigue Conference, Palm Beach Gardens, Florida, May 14-17, 2002.

[with M. P. Castanier and R. Bladh] “Investigation into Using Tuned Free Response Information to Predict Mistuned Forced Response of Bladed Disks,” Proceedings of the 7th National Turbine Engine High Cycle Fatigue Conference, Palm Beach Gardens, Florida, May 14-17, 2002.

[with J. A. Judge and S. L. Ceccio] “Mistuning Identification in Bladed Disks,” International Conference on Structural Dynamics Modelling, Madeira Island, Portugal, June 3-5, 2002.

Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju, “Multi-Domain Topology Optimization for Vehicle Substructure Design,” Symposium on Advanced Vehicle Technologies, ASME Paper IMECE2002-32908, Proceedings of the 2002 ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, November 2002.

[with D. Jiang and S. W. Shaw] “The Construction of Nonlinear Normal Modes for Systems with Internal Resonance: Application to Rotating Beams,” Symposium on Dynamics, Acoustics, and Simulations (DAS), Proceedings of the 2002 ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, November 2002.

O. Poudou and C. Pierre, “Hybrid Frequency-Time Domain Methods for the Analysis of Complex Structural Systems with Dry Friction Damping,” AIAA paper 2003-1411, Proceedings of the 44th AIAA Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, April 2003.

S.-H. Lim, R. Bladh, M. P. Castanier, and C. Pierre, “A Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibration,” AIAA paper 2003-1545, Proceedings of the 44th AIAA Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, April 2003.

M. I. Hussein and C. Pierre, “Correlation of Tuned Free Vibration Characteristics with Mistuning Sensitivity for a Bladed Disk,” AIAA paper 2003-1544, Proceedings of the 44th AIAA Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, April 2003.

N. Kim, K. K. Choi, J. Dong, and C. Pierre, “Design Optimization of Structural Acoustic Problems Using FEM-BEM,” AIAA paper 2003-1630, Proceedings of the 44th AIAA Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, April 2003.

S. Baik, M. P. Castanier, and C. Pierre, “Dynamic Characteristics of Bladed Disks with Mass Mistuning,” Proceedings of the International Forum on Aeroelasticity and Structural Dynamics–IFASD 2003, Amsterdam, Netherlands, June 4-6, 2003.

M. Legrand, B. Peseux, and C. Pierre, “Amélioration de la Prédiction de l’Interaction Rotor/Stator dans un Moteur d’Avion,” Sixième Colloque National en Calcul des Structures, Giens, France, May 20-23, 2003.

H. Wang, Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju, “Numerical and Experimental Verification of Optimum Design Obtained from Topology Optimization,” SAE paper 2003-01-1333, Proceedings of the Society of Automotive Engineers 2003 World Congress and Exhibition, March 3-6, 2003, Detroit, Michigan.

Z.-D. Ma, H. Wang, N. Kikuchi, C. Pierre, and B. Raju, “Substructure Design Using a Multi-Domain Multi-Step Topology Optimization Approach,” SAE paper 2003-01-1303, Proceedings of the Society of Automotive Engineers 2003 World Congress and Exhibition, March 3-6, 2003, Detroit, Michigan.

M. Legrand, D. Jiang, and C. Pierre, “Modes Normaux Non Linéaires d’un Arbre Rotatif par la Méthode des Surfaces Invariantes,” Proceedings of the 16ième Congrès Français de Mécanique, September 1-5, 2003, Nice, France.

M.P. Castanier and C. Pierre, “Mid-Frequency Vibration Analysis of Complex Structures: State of the Art and Future Directions,” Proceedings of the Tenth International Congress on Sound and Vibration, Stockholm, Sweden, July 7-10, 2003.

G. Zhang, M. P. Castanier, C. Pierre, and Z. P. Mourelatos, “Vibration and Power Flow Analysis of a Vehicle Structure Using Characteristic Constraint Modes,” SAE Paper 2003-01-1602, Proceedings of the SAE Noise & Vibration Conference and Exhibition, Traverse City, MI, May 2003.

S.-H. Lim, M. P. Castanier, and C. Pierre, “Reduced-Order Modeling and Analysis of Bladed Disks with Large Mistuning,” Proceedings of the 8th National Turbine Engine High Cycle Fatigue Conference (published on CD-ROM), Monterey, CA, April 2003.

S.-Y. Lee, M. P. Castanier, and C. Pierre, “Statistical Approximations of Power Flow for a Vehicle Structure With Uncertainties,” ASME Paper DETC2003/VIB-48457, Proceedings of the ASME 19th Biennial Conference on Mechanical Vibration and Noise, Chicago, IL, September 2003.

P. Apiwattanalunggarn, S. W. Shaw, and C. Pierre, “Component Mode Synthesis Using Nonlinear Normal Modes,” ASME Paper DETC2003/VIB-48441, Proceedings of the ASME 19th Biennial Conference on Mechanical Vibration and Noise, Chicago, IL, September 2003.

D. Jiang, C. Pierre, and S. W. Shaw, “Nonlinear Normal Modes for Vibratory Systems Under Periodic Excitation,” ASME Paper DETC2003/VIB-48443, Proceedings of the ASME 19th Biennial Conference on Mechanical Vibration and Noise, Chicago, IL, September 2003.

Z.-D. Ma, H. Wang, N. Kikuchi, C. Pierre, and B. Raju, “Function-Oriented Material Design for Next-Generation Ground Vehicles,” Symposium on Advanced Vehicle Technologies, ASME Paper IMECE2003-43326, Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 2003.

G. Zhang, M. P. Castanier, and C. Pierre, “Efficient Component Mode Synthesis with a New Interface Reduction Method,” Proceedings of International Modal Analysis Conference IMAC XXII, Dearborn, Michigan, January 26-29, 2004.

M. Legrand, C. Pierre, and B. Peseux, “Investigation of Rotor-Stator Interactions in Turbomachinery,” Tenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-10-2004-102), Honolulu, Hawaii, March 7-11, 2004.

O. Poudou, C. Pierre, and B. Reisser, “A New Hybrid Frequency-Time Domain Method for the Forced Vibration of Elastic Structures with Friction and Intermittent Contact,” Tenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-10-2004-068), Honolulu, Hawaii, March 7-11, 2004.

H. Wang, Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju, “Multi-Domain Multi-Step Topology Optimization for Vehicle Structure Crashworthiness Design,” SAE paper 2004-01-1173, Proceedings of the Society of Automotive Engineers 2004 World Congress and Exhibition, March 8-11, 2004, Detroit, Michigan.

S.-H. Lim, M. P. Castanier, and C. Pierre, “Predicting Mistuned Blade Amplitude Bounds and Stress Increases from Energy Formulations,” Proceedings of the 9th National Turbine Engine High Cycle Fatigue Conference (published on CD-ROM), Pinehurst, North Carolina, March 16-19, 2004.

S. Baik, M. P. Castanier, and C. Pierre, “Mistuning Sensitivity Prediction of Bladed Disks Using Eigenvalue Curve Veerings,” Proceedings of the 9th National Turbine Engine High Cycle Fatigue Conference (published on CD-ROM), Pinehurst, North Carolina, March 16-19, 2004.

S.-H. Lim, M. P. Castanier, and C. Pierre, “Extension of the Component Mode Mistuning Technique to the Identification and Experimental Simulation of Mistuning,” Proceedings of the 9th National Turbine Engine High Cycle Fatigue Conference (published on CD-ROM), Pinehurst, North Carolina, March 16-19, 2004.

S.-H. Lim, M. P. Castanier, and C. Pierre, “Vibration Modeling of Bladed Disks Subject to Geometric Mistuning and Design Changes,” AIAA paper 2004-1686, Proceedings of the 45th AIAA Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, April 2004.

C. Pierre and S. W. Shaw, “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Euromech Colloquium 457 Nonlinear Modes of Vibrating Systems, Fréjus, France, June 7-9, 2004.

S.-H. Lim, M. P. Castanier, and C. Pierre, “Intentional Mistuning Design Space Reduction Based on Vibration Energy Flow in Bladed Disks,” ASME paper GT2004-53873, Proceedings of ASME Turbo Expo 2004, Vienna, Austria, June 2004.

M. Legrand, B. Peseux, and C. Pierre, “Etude de l’Interaction Modale Rotor-Stator dans un Moteur d’Avion,” Proceedings of the 14ème Colloque Vibrations, Chocs et Bruit, Lyon, France, June 16-18, 2004.

O. Poudou and C. Pierre, “Étude de la réponse forcée de structures amorties par frotteurs de type coin et 3-D: Analyse théorique et simulations numériques,” Proceedings of the 14ème Colloque Vibrations, Chocs et Bruit, Lyon, France, June 16-18 2004.

O. Poudou and C. Pierre, “Nonlinear Vibration of an Industrial Bladed-Disk with an Attached Wedge Dry-Friction Damper, Proceedings of the Eleventh International Congress on Sound and Vibration, St. Petersburg, Russia, July 5-8, 2004.

C. Pierre and D. Jiang, “Nonlinear Modes of a Rotating Helicopter Blade,” International Conference on Nonlinear Dynamics-KPI 2004, Kharkov Polytechnical Institute, Kharkov, Ukraine, September 14-16, 2004.

Z.-D. Ma, D. Jiang, N. Kikuchi, C. Pierre, and B. Raju, “Multi-Domain Topology Optimization Using Advanced Substructuring Technique,” Proceedings of 36th International SAMPE Technical Conference, San Diego, California, November 15-18, 2004.

H. Wang, Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju, “Joint Design for Advanced Ceramic Armor under Ballistic Impact,” Proceedings of 36th International SAMPE Technical Conference, San Diego, California, November 15-18, 2004.

S. Baik, M. P. Castanier, and C. Pierre, “Some Practical Aspects of Using Reduced-Order Vibration Models for Design of Bladed Disks: Rotation Effects and Power Flow Analysis,” Proceedings of the 10th National Turbine Engine High Cycle Fatigue Conference (published on CD-ROM), New Orleans, Louisiana, March 8-11, 2005.

Z. He, B. I. Epureanu, and C. Pierre, “Influence of Aerodynamic Coupling on the Dynamics of Mistuned Bladed Disks,” Proceedings of the 10th National Turbine Engine High Cycle Fatigue Conference (published on CD-ROM), New Orleans, Louisiana, March 8-11, 2005.

Z.-D. Ma, C. Qi, N. Kikuchi, C. Pierre, H. Wang, and B. Raju, “Fundamental Studies on Crashworthiness Design with Uncertainties in the System,” SAE paper 2005-01-0613, Proceedings of the Society of Automotive Engineers 2005 World Congress, Detroit, Michigan, April 11-14, 2005.

S.-Y. Lee, M. P. Castanier, and C. Pierre, “Assessment of Probabilistic Methods for Mistuned Bladed Disk Vibration,” AIAA Paper 2005-1990, Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Austin, TX, April 2005.

S. Baik, M. P. Castanier, and C. Pierre, “Assessment of Blade Mistuning Effects via Power Flow Analysis of Tuned Bladed Disks,” AIAA Paper 2005-2027, Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Austin, TX, April 2005.

O. Poudou and C. Pierre, “A New Method for the Analysis of the Nonlinear Dynamics of Structures with Cracks,” Proceedings of Noise and Vibration: Emerging Methods (NOVEM 2005), Saint-Raphaël, France, April 18-21, 2005.

S. Roques, M. Legrand, C. Pierre, B. Peseux, and P. Cartraud, “Méthode de l’Equilibrage Harmonique Généralisé: Application à l’Interaction Modale Rotor/Stator,” Septième Colloque National en Calcul des Structures, Giens, France, May 17-20, 2005.

C. Qi, Z.-D. Ma, N. Kikuchi, and C. Pierre, “A System Decomposition Approach for Crashworthiness Design with Uncertainties in the System,” Proceedings of the Sixth World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, May 30-June 3, 2005.

Z. He, B. I. Epureanu, and C. Pierre, “Effects of Unsteady Aerodynamics on the Dynamic Response of Mistuned Bladed Disks,” Proceedings of the Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Vol. 1, pp. 250-255, keynote presentation, Cambridge, Massachusetts, June 14-17, 2005.

M. Legrand, C. Pierre, and B. Peseux, “Interaction Rotor-Stator dans un Moteur d'Avion par l'Intermédiaire de Contacts,” Proceedings of the 17ème Congrès Français de Mécanique, Troyes, France, 29 August-2 September 2005.

S.-Y. Lee, M. P. Castanier, and C. Pierre, C, “A Most Probable Point-Based Method for Probabilistic Vibration Analysis of Structures with Uncertainties,” in Structural Dynamics: EURODYN 2005 (Proceedings of the 6th International Conference on Structural Dynamics, Paris, France, 4–7 September 2005), Millpress, Rotterdam, The Netherlands, Vol. 2, pp. 987–992.

G. Zhang, M. P. Castanier, and C. Pierre, “Integration of Component-Based and Parametric Reduced-Order Modeling Methods for Probabilistic Vibration Analysis and Design,” in Structural Dynamics: EURODYN 2005 (Proceedings of the 6th International Conference on Structural Dynamics, Paris, France, 4–7 September 2005), Millpress, Rotterdam, The Netherlands, Vol. 2, pp. 993–998.

M. Legrand, C. Pierre, and B. Peseux, “Investigation of Structural Rotor-Stator Modal Interaction in Turbomachinery,” Proceedings of the 6th International Conference on Structural Dynamics, Paris, France, September 4-7, 2005.

S. Baik, M. P. Castanier, and C. Pierre, “Disk Design Methodology for Reducing Blade Vibration in Turbine Engine Rotors,” ASME Paper DETC2005-85741, Proceedings of the ASME 20th Biennial Conference on Mechanical Vibration and Noise, Long Beach, California, September 2005.

S. H. Song, M. P. Castanier, and C. Pierre, “Multi-Stage Modeling of Turbine Engine Rotor Vibration,”ASME Paper DETC2005-85740, Proceedings of the ASME 20th Biennial Conference on Mechanical Vibration and Noise, Long Beach, California, September 2005.

B. J. Olson, S. W. Shaw, and C. Pierre, “Order-Tuned Vibration Absorbers for Cyclic Rotating Flexible Structures,” ASME Paper DETC2005-84641, Proceedings of the ASME 20th Biennial Conference on Mechanical Vibration and Noise, Long Beach, California, September 2005.

M. Legrand, S. Roques, C. Pierre, and B. Peseux, “Aircraft Engine Structural Rotor-Stator Modal Interaction,” ASME Paper DETC2005-85251, Proceedings of the ASME 20th Biennial Conference on Mechanical Vibration and Noise, Long Beach, California, September 2005.

S. H. Song, M. P. Castanier, and C. Pierre, “Multi-Stage Modeling of Mistuned Turbine Engine Rotor Vibration,” NATO Paper RTO-MP-AVT-121-P-06, Proceedings of the NATO AVT-121 Symposium on Evaluation, Control and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea, and Air, Granada, Spain, October 2005.

J. Li, C. Pierre, and S. L. Ceccio, “A Validation of A New Technique for Mistuning Identification and Model Updating Based on Experimental Results for An Advanced Bladed Disk Prototype”, Proceedings of the NATO AVT-121 Symposium on Evaluation, Control and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea, and Air Vehicles, Granada, Spain, October 2005.

Baik, S., Castanier, M. P., and Pierre, C., “An Efficient Disk Design Optimization Process for Limiting Mistuned Blade Vibration and Stress Levels in Turbine Engine Rotors,” Paper ISROMAC11-2006-110, Proceedings of the Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery [Honolulu, HI, February 26 – March 2, 2006], Curran Associates, Red Hook, NY,
2006.

M. Legrand, L. Idoux, C. Pierre, and P. Cartraud, “Rotor-Stator Nodal Diameter Mode Interaction by Means of Contact in an Aircraft Engine,” Proceedings of the Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery [Honolulu, HI, February 26 – March 2, 2006], Curran Associates, Red Hook, NY, 2006.

C. Qi, Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju, “A Magic Cube Approach to Crashworthiness Design,” SAE paper 2006-01-0671, Proceedings of the Society of Automotive Engineers 2006 World Congress, Detroit, Michigan, April 3-6, 2006.

J. Li, M. P. Castanier, C. Pierre, and S. L. Ceccio, “Experimental Monte Carlo Mistuning Assessment of Bladed Disk Vibration Using Forcing Variations,” AIAA Paper 2006-1964, Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, RI, May 2006.

S.-Y. Lee, M. P. Castanier, and C. Pierre, “Component-Mode-Based Monte Carlo Simulation for Efficient Probabilistic Vibration Analysis,” AIAA Paper 2006-1990, Proceedings of the 8th AIAA Non-Deterministic Approaches Conference, Newport, RI, May 2006.

Y. Mikhlin, C. Pierre, K. Avramov, and A. Kozmin. “Nonlinear Normal Modes and Transfer of Energy in Systems Containing Essentially Nonlinear Elements,” Proceedings of the Second International Conference on Nonlinear Normal Modes and Localization in Vibrating Systems, Samos, Greece, June 19-23, 2006.

S. Roques, P. Cartraud, C. M. Stoisser, M. Legrand, C. Pierre, and B. Peseux, “Modélisation d’un Transitoire de Vitesse d’un Groupe Turbo-Alternateur avec Contact Rotor-Stator,” Proceedings of the 15ème Colloque Vibrations, Chocs et Bruit, Lyon, France, June 14-16, 2006.

Z. He, B. I. Epureanu, and C. Pierre: “A Novel Hybrid Method to Predict the Convergence History of Aeroelastic Calculations of Mistuned/Tuned Bladed Disks”, ASME Pressure Vessels and Piping Conference - Symposium on Fluid-Structure Interactions, Aeroelasticity, Fluid-Induced Vibration and Noise, Vol. PVP-2006-ICPVT11-93924, pp. 1-11, Vancouver, Canada, July 2006.

S. Roques, P. Cartraud, C. M. Stoisser, M. Legrand, B. Peseux, and C. Pierre, “Modelling of Rotor Speed Transient with Rotor-to-Stator Contact, Proceedings of the 7th IFToMM International Conference on Rotor Dynamics, Vienna, Austria, September 25-28, 2006.

Park, K., Zheng, G., Castanier, M. P., and Pierre, C., “A Component-Based Parametric Reduced-Order Modeling Technique and its Application to Probabilistic Vibration Analysis and Design Optimization,” ASME Paper IMECE2006-15069, Proceedings of the 2006 ASME International Mechanical Engineering Congress and Exposition, [Chicago, IL, November 5–10, 2006], American Society of Mechanical
Engineers, New York, 2006.

Saito, A., Castanier, M. P., and Pierre, C., “Efficient Nonlinear Vibration Analysis of the Forced Response of Rotating Cracked Blades,” ASME Paper IMECE2006-15426, Proceedings of the 2006 ASME International Mechanical Engineering Congress and Exposition [Chicago, IL, November 5–10, 2006], American Society of Mechanical Engineers, New York, 2006.

Song, S. H., Castanier, M. P., and Pierre, C., 2007, “System Identification of Multistage Turbine Engine Rotors,” ASME Paper GT2007-28307, Proceedings of ASME Turbo Expo 2007 [Montreal, Canada, May 14–17, 2007], American Society of Mechanical Engineers, New York, 2007.

Park, K., and Castanier, M. P., “Component Mode Synthesis for Substructures with Non-Matching Interfaces,” SAE Paper 2007-01-2333, Proceedings of the 2007 SAE Noise and Vibration Conference and Exhibition [St. Charles, IL, May 15–17, 2007], SAE International, Warrendale, PA, 2007.

S. Roques, M. Legrand, C. M. Stoissier, P. Cartraud, and C. Pierre, “Transitoire de Vitesse d’un Turbogénérateur avec Contact Rotor-Stator,” Huitième Colloque National en Calcul des Structures, Giens, France, May 21-25, 2007.

He, B. I. Epureanu, and C. Pierre: “Parametric Study of the Aeroelastic Response of Mistuned Bladed Disks”, Proceedings of the 4-th MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, Massachusetts, June 2007 [published in special issue of Computers and Structures].

D. Jiang, C. Pierre, and S.W. Shaw, “Nonlinear Modes Focusing on Geometric Nonlinearities with Application to a Rotorcraft Blade,” Proceedings of the Euromech Colloquium 483 Geometrically Non- Linear Vibrations of Structures, Porto, Portugal, July 9-11, 2007.

Saito, A., Castanier, M. P., and Pierre, C., “Effects of a Cracked Blade on Mistuned Turbine Engine Rotor Vibration,” ASME Paper DETC2007-35663, Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2007 [Las Vegas, NV, September 4–7, 2007], American Society of Mechanical Engineers, New York, 2007.

A. Batailly, M. Legrand, P. Cartraud, C. Pierre, and J.-P. Lombard, “Study of Component Mode Synthesis Methods in a Rotor-Stator Interaction Case,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2007 [Las Vegas, NV, September 4–7, 2007], American Society of Mechanical Engineers, New York, 2007.

S. Roques, M. Legrand, C. M. Stoisser, P. Cartraud, and C. Pierre, “Development of Beam-to-Beam Contact Detection Algorithms for Rotor-Stator Rubbing Applications,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2007 [Las Vegas, NV, September 4–7, 2007], American Society of Mechanical
Engineers, New York, 2007.

M. Legrand, C. Pierre, and P. Cartraud, “Aircraft Engine Structural Rotor-Stator Modal Interaction,” Proceedings of the Second International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 25-28, 2007.

K.V. Avramov, O.K. Morachkovski, C. Pierre, O. Galas and N. Shyriaieva, “Flexural-Flexural-Torsional Nonlinear Vibrations of Pre-Twisted Rotating Beams with Asymmetric Cross Section,” Proceedings of the Second International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 25-28, 2007.

G. Rudnyeva, M. Legrand and C. Pierre, “Aircraft Engine Structural Rotor-Stator Modal Interaction – An Analytical Approach,” Proceedings of the Second International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 25-28, 2007.

V. Ganine, M. Legrand, C. Pierre and H. Michalska, “A Reduction Technique for Mistuned Bladed Disks with Superposition of Large Geometric Mistuning and Small Model Uncertainties,” Proceedings of the Twelfth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, February 17-22, 2008.

A. Saito, M. P. Castanier, and C. Pierre, “Vibration Response of Cracked Cantilevered Rectangular Plates Near Eigenvalue Loci Veerings”, Proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference [Schaumburg, IL, April 7-10, 2008], paper AIAA-2008-1872, 2008.

M. Legrand, A. Batailly, and C. Pierre, “Blade-Tips to Casing Direct Contact Interaction in Aircraft Engines,” Proceedings of the 16ème Colloque Vibrations, Chocs et Bruit, Lyon, France, June 10-12, 2008.

A. Saito, M. P. Castanier, and C. Pierre, “An Efficient Reduced Order Modeling Technique for Nonlinear Vibration Analysis of Structures with Intermittent Contact”, Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference [Palm Springs, CA, May 4-7, 2009], paper AIAA-2009-2493, 2009.

D. Laxalde, M. Legrand and C. Pierre, “Modes Non-linéaires Appliqués aux Problèmes de Contact: Application à une Aube de Turbomachine,” Actes du Neuvième Colloque National en Calcul des Structures, May 25-29 2009, Giens, France.

M. Legrand and C. Pierre, “Modélisation Plastique Bi-linéaire de l’Usure de Matériaux Abradables: Application aux Turbomachines,” Actes du Neuvième Colloque National en Calcul des Structures, May 25-29 2009, Giens, France.

A. Batailly, M. Legrand, P. Cartraud and C. Pierre, “Evaluation d’une Méthode de Réduction Modale pour la Détection de Cas d’Interaction Modale lors de Contacts Rotor stator,” Proceedings of the 19ième Congrès Français de Mécanique, August 24-28, 2009, Marseille, France.

A. Batailly, M. Legrand, P. Cartraud, C. Pierre and J.-P. Lombard, “Evaluation of Component Mode Synthesis Methods for the Detection of Modal Interaction through Rotor Stator Contacts,” Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2009-87036, August 30-September 2, 2009, San Diego,
USA.

M. Legrand and C. Pierre, “Numerical Investigation of Abradable Coating Wear Through Plastic Constitutive Law: Application to Aircraft Engines,” Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2009-87669, August 30-September 2, 2009, San Diego, USA.

D. Laxalde, M. Legrand and C. Pierre, “Nonlinear Modal Analysis of Mechanical Systems with Frictionless Contact Interfaces,” Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2009-87387, August 30-September 2, 2009, San Diego, USA.

S. Gozen, B. Olson, S.W. Shaw and C. Pierre, “Resonance Suppression in Multi-DOF Rotating Flexible Structures Using Order-Tuned Absorbers,” Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference — DETC2009-86287, August 30-September 2, 2009, San Diego, USA.

D. Laxalde, M. Legrand and C. Pierre, “Nonlinear Modes of Large-Scale Structures with Unilateral Contact Constraints,” Proceedings of Euromech Colloquium 503 — Nonlinear Normal Modes, Dimension Reduction and Localization in Vibrating systems, September 27-October 2, 2009, Frescati, Italy.

A. Batailly, B. Magnain, M. Legrand and C. Pierre, “Validation of a 3D Contact Algorithm for the Study of Blade-Tip/Casing Contact in Turbomachines,” Proceedings of the 8th IFToMM International Conference on Rotordynamics, September 12-15, 2010, Seoul, Korea.

J. Wu, M. Legrand and C. Pierre, “Non-Synchronous Vibration of Jeffcott Rotor due to Internal Radial Clearance in Roller Bearings,” Proceedings of the 8th IFToMM International Conference on Rotordynamics, September 12-15, 2010, Seoul, Korea.

B. Magnain, A. Batailly, N. Chevaugeon, M. Legrand and C. Pierre, “Comparative Study of the Use of C1-Continuous Finite Elements and Splines for Contact Problems with Large Slidings,” IV European Conference on Computational Mechanics (ECCOMAS), May 16-21, 2010, Paris, France.

A. Batailly, M. Legrand and C. Pierre, “Influence of Abradable Coating Wear Mechanical Properties on Rotor-Stator Interaction,” ASME paper GT2011-45189, Proceedings of ASME Turbo Expo 2011, June 6-10, 2011, Vancouver, Canada.

K.V. Avramov and C. Pierre, “Aeroelastic Vibrations of Plates Interacting with Incompressible Potential Stream,” 4th International Conference on Nonlinear Dynamics, Sevastopol, Ukraine, June 19-22, 2013.

N.V. Perepelkin, Y.V. Mikhlin, C. Pierre, and E. Harutyunyan, “Nonlinear Normal Modes in Rotor Dynamics,” 4th International Conference on Nonlinear Dynamics, June 19-22, 2013, Sevastopol, Ukraine.

M. Meingast, A. Batailly, M. Legrand and C. Pierre, “Rotor/Stator Interaction within a Helicopter Engine,” Proceedings of the International Conference Nonlinear Dynamics in Engineering: Modelling, Analysis and Applications, August 21-23, 2013, Aberdeen, Scotland, UK.

A. Batailly, M. Legrand and C. Pierre, “Full 3D Rotor/Stator Interaction Simulations in Aircraft Engines with Time Dependent Angular Speed,” ASME paper GT2016-56715, Proceedings of ASME Turbo Expo 2016, June 13-17, 2016, Seoul, South Korea.

M. Legrand and C. Pierre, “Compact Weighted Residual Formulation for Periodic Solutions of Systems Undergoing Unilateral Contact and Frictional occurrences,” Proceedings of the 10th European Nonlinear Dynamics Conference – ENOC 2022, July 17-22, 2022, Lyon, France.

Invited Keynotes, Seminars, and Presentations

• “Analysis of Structural Systems with Parameter Uncertainties,” Department of Mechanical Engineering, Michigan State University, East Lansing, Michigan, October 17, 1985.

• “Localized Vibrations of Disordered Multi-Span Beams: Theory and Experiment,” 23rd Annual Meeting of the Society of Engineering Science, Buffalo, New York, August 25-27, 1986.

• “Analysis of Structural Systems with Parameter Uncertainties and Irregularities,” General Motors Research Laboratories, Engineering Mechanics Department, Warren, Michigan, June 1, 1987.

• “Analysis of Structural Systems with Parameter Uncertainties and Irregularities,” Office National d’Etudes et de Recherches Aérospatiales (ONERA), Chatillon, France, June 29, 1987.

• “Localization Phenomena in Disordered Dynamical Systems,” Wayne State University, Mechanical Engineering Department, Detroit, Michigan, November 18, 1987.

• “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry,” NASA Lewis Research Center, Structural Dynamics Branch, Cleveland, Ohio, December 16, 1987.

• “Localization of Vibration by Structural Irregularity,” Seminar, Department of Mechanical Engineering, University of California Berkeley, Berkeley, California, April 12, 1988.

• Participant, National Science Foundation Dynamic Systems and Control Program Review, Washington, D. C., June 8, 1988.

• “Localization Phenomena in Mistuned Blade Assemblies,” United Technologies Research Center, East Hartford, Connecticut, October 18, 1988.

• “Dynamics of Complex Structural Systems with Parameter Uncertainties,” General Motors Research Laboratories, Engineering Mechanics Department, Warren, Michigan, January 10, 1989.

• “Damping-Like Effects of Random Irregularities in Periodic Structures,” 12th Canadian Congress of Applied Mechanics (CANCAM '89), Ottawa, Canada, May 28-June 2, 1989.

• “Vibration Localization by Disorder—A Viable Alternative to Damping?,” Invited Topical Lecture, IUTAM Symposium on Elastic Wave Propagation and Ultrasonic Nondestructive Evaluation, Boulder, Colorado, July 30-August 3, 1989.

• “Localization Phenomena in Engineering Structures,” Office of Naval Research Workshop on Complexity in Structures, The Catholic University of America, Washington, D. C., September 27-28, 1989.

• “Localization Phenomena in Structural Dynamics,” Duke University, Department of Mechanical Engineering and Materials Science, November 9, 1989.

• “Localization Phenomena and Their Applications in Structural Dynamics,” Cornell University, Department of Theoretical and Applied Mechanics, December 6, 1989.

• “Comments on the Dynamics of Mistuned Blade Assemblies,” Institute for Computational Mechanics in Propulsion (ICOMP), NASA Lewis Research Center, Cleveland, Ohio, May 31, 1990.

• “Localization Phenomena in Mistuned Bladed-Disk Assemblies,” General Electric Aircraft Engines, Cincinnati, Ohio, October 16, 1990.

• “Normal Modes in Nonlinear Oscillatory Systems” (with S. W. Shaw), ASME Applied Mechanics Conference, Columbus, Ohio, June 16-19, 1991.

• Six-hour lecture series on "Localization Phenomena in Structural Dynamics," Universita degli Studi di Roma La Sapienza, Rome, Italy, June 26-28, 1991.

• “Localization Phenomena in Structural Dynamics,” Colloquium on Modern Topics in Mechanics, Northwestern University, Evanston, Illinois, November 8, 1991.

• “Normal Modes for Nonlinear Oscillatory Systems”, Fourth Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft Systems, College Park, Maryland, November 19-21, 1991.

• “Vibration Localization Phenomena in Engineering Structures,” Michigan State University, East Lansing, Michigan, March 12, 1992.

• “Vibration of Space Structures: Application to Localization Phenomena in Truss Beams, ”Conservatoire National des Arts et Métiers, France, April 3, 1992.

• “Localisation des Vibrations des Systèmes Périodiques: Structures Spatiales et Turbomachines,”Ecole Centrale de Paris, Chatenay Malabry, France, October 14, 1992.

• “Normal Modes for Nonlinear Dynamical Systems,” Ecole Centrale de Paris, Chatenay Malabry, France, November 25, 1992.

• “Phénomènes de Localisation en Dynamique des Structures,” Sémimaire Ile-de France (Polytechnique, Centrale Paris, ENS Cachan) Ecole Normale Supérieure, Cachan, France, November 19, 1992.

• Four-hour lecture series on “Wave Propagation and Vibration Transmission in Periodic Structures,”Conservatoire National des Arts et Métiers, Paris, France, November 21 and 28, 1992.

• “Localization and Wave Conversion Phenomena in Multi-Coupled Nearly Periodic Structural Systems,” invited contribution to the special session on Anderson localization in acoustics and structural vibration, 125th meeting of the Acoustical Society of America, May 17-21, 1993.

• “Phénomènes de Localisation et de Conversion d'Ondes dans les Structures Presque Périodiques Multi-Couplées,” Colloque National en Calcul des Structures, Giens, France, May 11-14, 1993.

• “Forced Response of Mistuned Bladed Disks,” Workshop on Forced Response Prediction for Turbomachinery, NASA Lewis Research Center, Cleveland, Ohio, August 11, 1993.

• “Localization Phenomena in Structural Dynamics,” Seminar, Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania, October 6, 1993.

• “Localization Phenomena in Structural Dynamics,” Seminar, Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, Arizona, January 28, 1994.

• “Phénomènes de Localisation en Mécanique des Structures,” Laboratoire de Modélisation et Mécanique des Structures, Université Pierre et Marie Curie, Paris, France, November 14, 1994.

• “Localization Phenomena in Structural Dynamics,” Seminar, Department of Aeronautical and Astronautical Engineering, University of Illinois at Urbana-Champaign, Illinois, February 6, 1995.

• “Localization Phenomena in Disordered Structures: Application to Truss Beams,” Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania, April 9, 1996.

• Eight-hour course on “Localization Phenomena in Structural Dynamics, Nonlinear Modal Analysis, and Mid-Frequency Dynamics of Complex Structures,” Société Nationale d'Etude et de Construction de Moteurs d'Aviation (Snecma), Moissy Cramayel, France, April 25, 1996.

• “Mid-Frequency Vibration Analysis of Complex Structures,” Ford Research Laboratory, Ford Motor Company, Dearborn, Michigan, October 16, 1996.

• “Modal Analysis Techniques for Nonlinear Large-Scale Structural Systems,” AFOSR/ARO Workshop, Myrtle Beach, South Carolina, September 22-25, 1997.

• “Nonlinear Modal Analysis of Large-Scale Structural Systems,” Seminar, Universita degli Studi di Roma La Sapienza, Rome, Italy, November 27, 1997.

• “Localization Phenomena in Imperfect Engineering Structures,” Seminar, Department of Mechanical Engineering, Ohio State University, Columbus, Ohio, February 27, 1998.

• “Localization Phenomena in Imperfect Engineering Structures,” Seminar, Department of Mechanical Engineering, Pennsylvania State University, University Park, Pennsylvania, April 30, 1998.

• “An Efficient, Hybrid Frequency-Time Domain Method for the Dynamics of Large-Scale Dry- Friction Damped Structural Systems,” 35th Annual Technical Meeting of the Society of Engineering Science, Pullman, Washington, September 27-30, 1998.

• “Localization Phenomena in Imperfect Engineering Structures,” Seminar, Department of Aeronautical and Astronautical Engineering, University of Illinois at Urbana-Champaign, Illinois, September 21, 1998.

• “Experimental Investigations of the Effects of Mistuning on the Forced Response of Blade Assemblies,” NASA Lewis Research Center, Cleveland, Ohio, October 5, 1998.
Curriculum Vitae: C. Pierre page 36 February 3, 2021

• “Preventing High Cycle Fatigue in Turbine Engine Components,” poster presentation at the Capitol
Hill Exhibit on University Research for the National Defense, Cannon Caucus Room, U.S. House of Representatives, Washington, D. C., May 13, 1999.

• “Modal Reduction of a Nonlinear Rotating Beam Through Nonlinear Normal Modes,” Eighth ARO Workshop on Aeroelasticity of Rotorcraft Systems, Pennsylvania State University, State College, Pennsylvania, October 20, 1999.

• “Approximations of Low- to Mid-Frequency Power Flow in Complex Structures,” Seminar, General Motors Proving Grounds, Milford, Michigan, November 18, 1999.

• “Normal Modes and Model Size Reduction for Nonlinear Structural Vibrations,” Seminar, NASA Langley Research Center, Hampton, Virginia, December 8, 1999.

• “Efficient Reduced-Order Modeling of Vibration of Complex Structures,” with Applications to Mid-Frequency Power Flow,” Seminar, General Motors Proving Grounds, Milford, Michigan, March 27, 2000.

• “Phénomènes de Localisation en Dynamique des Structures,” Seminar, Ecole Centrale de Nantes, Nantes, France, November 23, 2000.

• Six-hour lecture series on “Dynamique des Roues Aubagées,” “Analyse Modale Non-Linéaire,” and “Vibration des Structures Complexes,” Department of Structures and Materials, Ecole Centrale de Nantes, Nantes, France, November 17-27, 2000.

• One-day Industry-University short course on “Blade Vibration in Axial & Centrifugal Compressors and Steam Turbines,” The Elliott Company, Jeannette, Pennsylvania, February 23, 2001.

• “Localization Phenomena in Imperfect Engineering Structures,” Seminar, Department of Mechanical Engineering, The University of Maryland, College Park, Maryland, April 23, 2001.

• “Dry Friction Damped Systems: Modeling and Dynamics,” Premier Symposium Dynamique des Structures, Société Nationale d'Etude et de Construction de Moteurs d'Aviation (Snecma), Villaroche, France, October 25, 2001.

• “From Localization to Jet Engines: A Case Study of Tech Transfer from Academia to Industry,” Symposium on Future Directions in Dynamics and Controls of Systems and Structures, 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, November 2001.

• “Experimental Investigations of the Effects of Mistuning on Bladed Disk Dynamics,” Seminar, NASA Glenn Research Center, Cleveland, Ohio, February 27, 2002.

• “Prediction and Design Strategies to Achieve Light Weight, Reduced NVH, and Improved Durability for Next-Generation Vehicles,” Eight Annual Automotive Research Center (ARC) Conference on Modeling and Simulation of Ground Vehicles, Warren, Michigan, May 14-15, 2002.

• “Localization of Vibration,” Seminar, Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, Massachusetts, September 13, 2002.
• “Diversifying the Professoriate,” Panelist, EMERGE10 Workshop 2003, Atlanta, Georgia, April 24-26, 2003.

• “New Capabilities in Structural Simulation, Analysis and Design: Tools and Applications,” Ninth Annual Automotive Research Center (ARC) Conference on Modeling and Simulation of Ground Vehicles, Auburn Hills, Michigan, May 12-13, 2003.

• “Modélisation et Analyse des Vibrations de Roues Aubagées Désaccordées,” Seminar, Electricité de France (EDF), Direction des Etudes et Recherches, Clamart, France, June 2, 2003.

• “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Keynote Lecture, Conference Bifurcations: The Use and Control of Chaos, 28-30 July 2003, Southampton, United Kingdom.

• “Modeling, Analysis, and Testing of Mistuned Bladed Disks,” Seminar, MTU Aero Engines GmbH, Structurmechanik, München, Germany, July 23, 2003.

• “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Seminar, Center for Applied Dynamics Research, School of Engineering and Physical Sciences, University of Aberdeen, Scotland, July 31, 2003.

• “Vibration of Complex Automotive Structures: Research Milestones and Challenges,” Seminars, Toyota Motor Corporation Technical Center and Toyota Central R&D Labs, Inc., Aichi, Japan, October 21-22, 2003.

• “Vibration of Complex Automotive Structures: Research Milestones and Challenges,” Seminar, Department of System Design Engineering, Keio University, Yokohama, Japan, October 24, 2003.

• “Analyse Vibratoire des Structures Aérospatiales et Automobiles: Avancées et Défis à Relever,” Opening Keynote Lecture, Deuxième Colloque d’Analyse Vibratoire Expérimentale, Blois, France, November 13-14, 2003.

• “Vibration of Complex Aerospace Structures,” Seminar, Universidad Politécnica de Puerto Rico, San Juan, Puerto Rico, January 27, 2004.

• “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Seminar, Conservatoire National des Arts et Métiers, France, March 2, 2004.

• “Vibration of Complex Aerospace and Automotive Structures: Research Milestones and Challenges, ”Seminar, Département Dynamique des Structures et des Systèmes Couplés, Office National d’Etudes et de Recherches Aérospatiales (ONERA), Chatillon, France, March 3, 2004.

• “Vibration of Complex Automotive Structures: Research Milestones and Challenges,” Seminar, Department of Mechanical Engineering, Massachusetts Institute of Technology, Massachusetts, March 12, 2004.

• “Vibration of Complex Aerospace and Automotive Structures,” Seminar, Laboratoire de Mécanique et Tehnologie (LMT), Ecole Normale Supérieure de Cachan, Cachan, France, April 8, 2004.

• “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Plenary Lecture, Euromech Colloquium 457 Nonlinear Modes of Vibrating Systems, Fréjus, France, June 7-9, 2004.

• “Interface Reduction Methods for Substructuring Analysis of Complex Structural Systems,” Abstract 1055, Sixth World Congress on Computational Mechanics (WCCM VI), Beijing, China, September 5-10, 2004.

• “Vibration of Complex Automotive Structures: Research Milestones and Challenges,” seminar, Department of Automotive Engineering, Jilin University, Changchun, China, September 9, 2004.

• “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Opening Plenary Lecture, International Conference on Nonlinear Dynamics-KPI 2004, Kharkov Polytechnical Institute, Kharkov, Ukraine, September 14-16, 2004.

• “Les Modes Nonlinéaires en Dynamique des Structures,” Seminar, Laboratoire de Mécanique et d’Acoustique, Centre National de la Recherche Scientifique, Marseille, France, December 22, 2004.

• “New Capabilities in Structural Dynamics and Vibration Analysis,” Seminar, School of Mechanical Engineering, Tsinghua University, Beijing, China, March 17, 2005.

• “Vibration of Aerospace and Automotive Structures: Research Milestones and Challenges,” seminar, Department of Mechanical Engineering, University of Maryland Baltimore County, Baltimore, Maryland, November 11, 2005.
Curriculum Vitae: C. Pierre page 38 February 3, 2021

• “Vibration of Aerospace and Automotive Structures: Research Milestones and Challenges,” seminar, Department of Mechanical and Aerospace Engineering, Clarkson University, Potsdam, New York, April 14, 2006.

• “Vibration of Complex Aerospace and Automotive Structures: Research Milestones and Challenges,” Plenary Lecture, The Second International Conference on Dynamics, Vibration and Control, Beijing, China, August 23-26, 2006.

• “Nonlinear Modes Focusing on Geometric Nonlinearities with Application to a Rotorcraft Blade, ”Plenary Lecture, Euromech Colloquium 483 Geometrically Non-Linear Vibrations of Structures, Porto, Portugal, July 9-11, 2007.

• “New Challenges in Turbomachinery: Understanding the Rotor-Stator Contact Interaction,” Opening Plenary Lecture, Second International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 25-28, 2007.

• “Nonlinear Normal Modes and Their Application in Structural Dynamics,” Seminar, Institut de Recherche en Génie Civil et Mécanique, Ecole Centrale de Nantes, Nantes, France, July 15, 2010.

• “Numerical Investigation of Abradable Coating Wear through Plastic Constitutive Law: Application to Aircraft Engines,” invited contribution, IUTAM Symposium Nonlinear Dynamics for Advanced Technologies and Engineering Design, Aberdeen, UK, July 27-30, 2010.

• “Numerical Investigation of Abradable Coating Wear through Plastic Constitutive Law: Application to Aircraft Engines,” Opening Plenary Lecture, Third International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 21-24, 2010.

• “Structural Dynamics of Complex Aerospace and Automotive Structures: Research Milestones and Challenges,” Distinguished Lecture, Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Canada, October 8, 2010.

• “New strategies for unilateral contact rotor-stator interactions in aircraft engines,” Keynote Lecture, 18ème Symposium Vibrations, Chocs et Bruit, Clamart, France, July 3-5, 2012.

• “Numerical Prediction of the Vibratory Response of Mechanical Systems Undergoing Unilateral Contact Conditions,” Keynote Lecture, Fourth International Conference on Nonlinear Dynamics, Sevastopol, Ukraine, June 19-22, 2013.

• Invited talk, The Automotive Research Center 20th Annual Program Review, University of Michigan, Ann Arbor, MI, May 21, 2014.

• “Nonlinear Normal Mode Strategies for Unilateral Contact Rotor-Stator Interactions,” invited lecturer and panelist, session 33-7: Efficient Dynamic Analysis of Nonlinear Structures, ASME Turbo Expo 2014, Düsseldorf, Germany, June 16-20, 2014.

• “Nonlinear Normal Mode Strategies for Unilateral Contact Rotor-Stator Interactions,” Seminar, School of Mechanical Engineering, Purdue University, November 6, 2014.

• “Nonlinear Normal Mode Strategies for Unilateral Contact Rotor-Stator Interactions,” Seminar,
Department of Aerospace and Mechanical Engineering, University of Notre Dame, November 11, 2014.

• “Nonlinear Normal Modes and their Application in Structural Dynamics,” Seminar, Department of
Mechanical Engineering, The Catholic University of America, Washington, D.C., April 30, 2015.

Theses

• “Investigation of Postbuckling Behavior with a Finite Element Model,” Rapport de Stage de Fin d’Etudes, Ecole Centrale des Arts et Manufactures, July 1982.

• “An Incremental Approach to the Theory of Dynamic Instability of Plates,” Master's Thesis No. 1634-T, Princeton University, October 1983.

• “Analysis of Structural Systems with Parameter Uncertainties,” Ph.D. Dissertation, Duke University,
1985.