Publications & Patents

List of Publications
 
  • H. Qiu, V. Stepanov, A. DiStasio, A. Surapaneni, and W.Y. Lee, “Investigation of the Crystallization of RDX during Spray Drying," Powder Technology, 274, 333-337 (2015).
     
  • H. Qiu, T. Bechtold, L. Le, and W.Y. Lee, “Evaporative Assembly of Graphene Oxide for Electric Double-Layer Capacitor Electrode Application,” Powder Technology, 270, 192-196 (2015).
     
  • M. Ervin, L. Le, and W.Y. Lee, “Inkjet-Printed Flexible Graphene-Based Supercapacitors,” Electrochimica Acta, 147, 610-616 (2014).
     
  • Y. Gu, W. Zhang, H. Wang, and W.Y. Lee, “Chitosan Surface Enhances the Mobility, Cytoplasm Spreading, and Phagocytosis of Macrophages,” Colloids and Surfaces B: Biointerfaces, 117, 42–50 (2014).
     
  • W. Zhang, W.Y. Lee, D. Siegel, P. Tolias and J. Zilberberg, “Patient-Specific 3D Microfluidic Tissue Model for Multiple Myeloma”, Tissue Engineering C: Methods, 20, 663-670 (2014).
     
  • D. Kong, L.T. Le, Y. Li, J.L. Zunino, and W.Y. Lee, “Temperature-Dependent Electrical Properties of Graphene Inkjet-Printed on Flexible Materials,” Langmuir, 28, 13467−13472 (2012).
     
  • A. C. Ihnen, A.M. Petrock, T. Chou, B.E. Fuchs, and W.Y. Lee, “Organic Nanocomposite Structure Tailored by Controlling Droplet Coalescence during Inkjet Printing,” ACS Applied Materials & Interfaces, 4, 4691−4699 (2012).
     
  • H. Qiu, V. Stepanov, T. Chou, A. Surapaneni, A. R. Di Stasio, and W.Y. Lee, “Single-Step Preparation and Formulation of HMX Nanocrystals,” Powder Technology, 226, 235-238 (2012).
     
  • X. Chen, Y. Gu, J.-H., Lee, W.Y. Lee, and H. Wang, “Multifunctional Surfaces with Biomimetic Nanofibres and Drug-Eluting Micro-Patterns for Infection Control and Bone Tissue Formation,” European Cells and Materials, 24, 237-248 (2012).
     
  • J.-H. Lee, Y. Gu, H. Wang, and W. Y. Lee, “Microfluidic 3D Bone Tissue Model for High-Throughput Evaluation of Wound-Healing and Infection-Preventing Biomaterials,” Biomaterials, 33, 999-1006, (2012).
     
  • R. Kenion and W.Y. Lee, “Inkjet-Printed Silver Nanoparticle Arrays for Dental Implants,” pp.1-2, Proceedings of the IEEE 37th Annual Northeast Bioengineering Conference, Albany, New York, 2011.
     
  • Y. Gu, X. Chen, J.-H. Lee, D. Monteiro, H. Wang, and W.Y. Lee, “Inkjet Printed Antibiotic- and Calcium-Eluting Bioresorbable Nanocomposite Micropatterns for Orthopedic Implants,” Acta Biomaterialia, 8, 424-431 (2012).
     
  • L.T. Le, M.H. Ervin, H. Qiu, B.E. Fuchs, J. Zunino, and W.Y. Lee, “Inkjet-Printed Graphene for Flexible Micro-Supercapacitors,” pp. 67-71 in Proceedings of the 11th IEEE International Conference on Nanotechnology, August 15-18, Portland, Oregon, 2011.
     
  • A.C. Ihnen, A.M. Petrock, T. Chou, P.J. Samuels, B.E. Fuchs, and W.Y. Lee, “Crystal Morphology Variation in Inkjet-Printed Organic Materials,” Applied Surface Science, 258, 827-833 (2011).
     
  • L.T. Le, M.H. Ervin, H. Qiu, B.E. Fuchs, and W.Y. Lee, “Graphene Supercapacitor Electrodes Fabricated by Inkjet Printing and Thermal Reduction of Graphene Oxide,” Electrochemistry Communications, 13, 355-358 (2011).
     
  • L.J. Currano, W. Churaman, C. Becker, C.J. Morris, L.M. Reddy, A. Ihnen, P. Ajayan, W.Y. Lee, “Energetic Materials for Integration on Chip,” pp. 30-36, Proceedings of the 14th International Detonation Symposium, Coeur d’Alene, ID, April 11-16, 2010. Published by the Office of Naval Research, Arlington, VA 22217.
     
  • A.C. Ihnen, B. Fuchs, A. Petrock, P. Samuels, V. Stepanov, A. Di Stasio, and W.Y. Lee, “Inkjet Printing of Nanocomposite High-Explosive Materials,” pp.37-40, Proceedings of the 14th International Detonation Symposium, Coeur d’Alene, ID, April 11-16, 2010. Published by the Office of Naval Research, Arlington, VA 22217.
     
  • V. Stepanov, A. Di Stasio, H. Qiu, and W.Y. Lee, “Preparation and Properties of Nanostructured RDX/Polymer Compositions,” pp. 23-29, Proceedings of the 14th International Detonation Symposium, Coeur d’Alene, ID, April 11-16, 2010. Published by the Office of Naval Research, Arlington, VA 22217.
     
  • J.-H. Lee, H. Wang, J.B. Kaplan, and W.Y. Lee, “Microfluidic Approach to Create 3D Tissue Models for Biofilm Related Infection of Orthopaedic Implants,” Tissue Engineering C: Methods, 17, 39-48 (2011).
     
  • H. Qiu, T. Chou, V. Stepanov, and A. Di Stasio, and W.Y. Lee, “RDX-based Nanocomposite Microparticles for Significantly Reduced Shock Sensitivity,” J. of Hazardous Materials, 185, 489-493 (2011).
     
  • J.-H. Lee, H. Wang, J.B. Kaplan, W.Y. Lee, “Effects of S. epidermidis on Osteoblast Adhesion and Viability on Ti Alloy Surface in Microfluidic Co-Culture Environment,” Acta Biomaterialia, 6 4422-4429 (2010).
     
  • A.C. Ihnen, J.-H. Lee, and W.Y. Lee,” Effects of Disordered Hemispherical Micropatterns on Staphylococcus epidermidis Biofilm Formation,” Colloids and Surfaces B: Biointerfaces, 75, 601-607 (2010).
     
  • J.-H. Lee, J. B. Kaplan, and W. Y. Lee, “Microfluidic Devices for Studying Growth and Detachment of Staphylococcus epidermidis Biofilms,” Biomedical Microdevices, 10, 489-498 (2008).
     
  • Y.-F. Su and W. Y. Lee, “Synthesis of Dense and Uniform Silicate Coating Microstructure by Layer-by-Layer Self-Assembly of Yb2O3 and SiO2 Particles,” Surface & Coatings Technology, 202, 3661-3668 (2008).
     
  • Y.-F. Su, H. Kim, S. Koven, and W. Y. Lee, “Continuous Nanoparticle Production by Microfluidic-Based Emulsion, Mixing, and Crystallization,” Journal of Solid State Chemistry, 180, 2625-2629 (2007).
     
  • J.-H. Lee, H. Wang, M. Libera, and W.Y. Lee, “Microreactor Model for Biofilm-Associated Infection of Biomedical Implants,” Proceedings of the 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Paris, France, (2007).
     
  • P. R. Deduc, M. S. Wong, P. M. Ferreira, R. E. Groff, K. Haslinger, M. P. Koonce, W. Y. Lee, J. C. Love, J. A. McCammon, N.A. Monteiro-Riviere, V. M. Rotello, G. W. Rubloff, R. Westervelt, and M. Yoda, “Towards an In Vivo Biologically Inspired Nanofactory,” Nature Nanotechnology, 2, 3-7 (2007).
     
  • H. Chen and W. Y. Lee, “Synthesis of Cellular Silica Structure under Microchannel Confinement,” J. Am. Ceram. Soc., 90[1], 36-43 (2007).
     
  • H. Qiu and W. Y. Lee, “Infiltration and Immobilization of Catalyst Particles into the Confined Space of Microstructured Reactors via Layer-by-Layer Self-Assembly,” Applied Catalysis A, 314, 200-207 (2006).
     
  • H. Qiu, S. Sukhishvili, and W.Y. Lee, “Layer-by-Layer Self-Assembly of Ceramic Particles as a Non-line-of-Sight Technique for Coating Complex Shape Substrates, J. Am. Ceram. Soc., 89[4], 1180-87 (2006).
     
  • Y.-F Su, H. Chen, and W. Y. Lee, “Abnormal Grain Growth and Crystallization during Rapid Annealing of Sol-Gel Alumina Thin-film Deposited on Ni-based Superalloy,” J. Am. Ceram. Soc., 88, 3235-37 (2005).
     
  • H. Chen, L. Bednarova, R. S. Besser, and W. Y. Lee, “Surface-Selective Infiltration of Thin-film Catalyst into Microchannel Reactors,” Applied Catalysis A, 286, 186-195 (2005).
     
  • X. Ouyang, L. Bednarova, P. Ho, H. Chen, S. Pau, A. Lawal, W. Y. Lee, and R.S. Besser, Comparisons Between a Thin-Film Catalyzed Microreactor and Conventional Lab Reactors for PrOx Kinetic Studies,” Proceedings of AIChE Spring National Meeting, 2917-2926 (2005).
     
  • H. Li, J. Lee, G. N. Morscher, and W. Y. Lee, “Tensile and Stress-Rupture Behavior of SiC/SiC Minicomposites Containing Chemically Vapor Deposited Zirconia Interphase,” J. Am. Ceram. Soc., 87[9], 1726-33 (2004).
     
  • I. Tsarenko, H. Du, and W.Y. Lee, “Effects of Thin Mullite Coating on the Environmental Stability of Sintered Si3N4”, J. Am. Ceram. Soc., 87[3], 417-20 (2004).
     
  • H. Qiu, K. Martus, W.Y. Lee, and K. Becker, “Hydrogen Generation in a Microhollow Cathode Discharge in High-Pressure Ammonia-Argon Gas Mixtures,” Int. J. Mass Spectrom., 233, 19-24 (2004).
     
  • G.Y. Kim, L.M. He, J.D. Meyer, A. Quintero, J.A. Haynes, and W.Y. Lee, “Mechanisms of Hf Dopant Incorporation during  the Early Stage of CVD Aluminide Coating Growth under Continuous Doping Conditions,” Metall. Mater. Trans. A., 35A, 3581-93 (2004).
     
  • Y.-F. Su,  L. F. Allard, D. W. Coffey, and W. Y. Lee, “Effect of a Thin a-Al2O3 Layer on Morphological Development and Growth Kinetics of the Thermally Grown Oxide Formed on Single Crystal Ni-Based Superalloy Surface,” Metall. Mater. Trans., 35A, 1055-1065 (2004).
     
  • L. M. He, Y.-F. Su, L. F. Allard, M. Lance, and W.Y. Lee, “Effects of Rapid Heating, Low Pressure Pre-Oxidation, and Hf Contamination on the Nucleation and Growth of Chemically Vapor Deposited a-Al2O3 on Single Crystal Ni Superalloy Surface,” Metall. Mater. Trans., 35A, 1113-1124 (2004).
     
  • L. M. He, J.D. Meyer, and W.Y. Lee, “Effects of Pre-Hafnizing on Morphological Development of a CVD Aluminide Coating Formed on Single Crystal Ni-based Alloys,” Metall. Mater. Trans. A., 35A, 891-897 (2004).
     
  • W.Y. Lee, R. Besser, H. Chen, and L Bednarova, “Thin-film Catalyst Development as Key Part of Rational Heterogeneous Microreactor Design and Fabrication,” pp. 141-144 in Proceedings of the Third International Workshop on Micro and Nanotechnology for PowerGeneration and Energy Conversion Applications,” Global Emerging Technology Institute, New York, 2003.
     
  • J. Lee, H. Li, W. Y. Lee, and M. J. Lance, “Effects of Oxygen Partial Pressure on the Nucleation Behavior and Morphology of Chemically Vapor Deposited Zirconia on Hi-NicalonTM Fiber and Si,” J. Am. Ceram. Soc., 86, 2031-36 (2003).
     
  • Y.-F. Su and W. Y. Lee, “Comparison of Effects of CVD Al2O3 and Pre-oxidized Al2O3 Layers on the Thermally Grown Oxide Formed on Ni-based Superalloy,” pp. 33-39 in High Temperature Corrosion and Materials Chemistry IV, Edited by E. Opila, P. Hou, T. Maruyama, B. Pieraggi, D. Shifler, and E. Wuchina, The Electrochemical Society, Pennington, New Jersey, 2003.
     
  • J. Lee, H. Li, and W. Y. Lee, “Thermal Stability of a Chemically Vapor Deposited Multilayer Coating Containing Amorphous Silica and Rutile Titania on Hi-Nicalon Fiber,” J. Am. Ceram. Soc., 86, 1797-99 (2003).
     
  • L. Bednarova, X. Ouyang, H. Chen, W. Y. Lee, and R. S. Besser, “Preferential Oxidation of CO in a Microreactor with a Single Channel,” Am. Chem. Soc. Div. Fuel Chem. Prepr., 48(2), (2003).
     
  • W. Y. Lee, H. Li, and Y.-F. Su, “Multifunctional Coating Design for High-temperature Materials,” Mater. Sci. Forum, 426, 137-144 (2003).
     
  • I. Tsarenko, S. Park, H. Du, and W. Y. Lee, “Sol-Gel Alumina Coating for Improved Cyclic Oxidation Resistance of Silicon Nitride,” J. Am. Ceram. Soc., 86, 1622-1624 (2003).
     
  • I. Tsarenko, S. Park, H. Du, and W. Y. Lee, “Effects of Additive and Impurity Species on the Oxide Morphology of Silicon Nitride,” J. Mater. Res., 18(4), 878-884 (2003).
     
  • Y. Zhang, J.A. Haynes, B.A. Pint, I.G. Wright, and W.Y. Lee, “Martensitic Transformation in CVD NiAl and (Ni,Pt)Al Bond Coatings,” Surf. Coat. Tech., 163/164, 19-24 (2003).
     
  • L.M. He, K. Putyera, J.D. Meyer, L.R. Walker, and W.Y. Lee, “Depth Profiling of Hf-doped Aluminide Coating by Glow-Discharge Mass Spectrometry,” Metall. Mater. Trans. A., 33A, 3578-3582 (2002).
     
  • I.V. Tsarenko, H. Du, W.Y. Lee, and J. Holowczak, “Effects of a Thin CVD-Si Layer on the Oxidation Behavior of Si3N4,” Ceram. Eng. Sci. Proc., 23, 497-504 (2002).
     
  • H. Li, J. Lee, and W. Y. Lee, “Effects of Air Leaks on the Phase Content, Microstructure, and Interfacial behavior of CVD Zirconia on SiC Fiber,” Ceram. Eng. Sci. Proc., 23, 261-268 (2002).
     
  • H. Li, J. Lee, M.R. Libera, W.Y. Lee, A. Kebbede, M.J. Lance, H.Y. Wang, and G.N. Morscher, “Morphological Evolution and Weak Interface Development within CVD-Zirconia Coating Deposited on Hi-Nicalon Fiber,” J. Am. Ceram. Soc., 85(6) 1561-68, (2002).
     
  • Y.-F. Su, M.A. Torzilli, J.D. Meyer, C.J. Rawn, M.J. Lance, S. Ruppi, and W.Y. Lee, “Effects of an Electroplated Platinum Interlayer on the Morphology and Phase of Chemical-Vapor-Deposited Alumina on Single-Crystal, Ni-Based Superalloy,” J. Am. Ceram. Soc., 85, 2089-2096, (2002).
     
  • Y.-F. Su, M. Torzilli, J.D. Meyer, W.Y. Lee, M.J. Lance, C.J. Rawn, and S. Ruppi, “Synthesis of Alpha-Al2O3 Template on Ni Superalloy Surface by Chemical Vapor Deposition,” pp. 15-28 in Elevated Temperature Coatings: Science and Technology IV.  Edited by J.M. Hampikian, N.B. Dahotre, and J.E. Morral, The Minerals, Metals & Materials Society, Warrendale, 2001.
     
  • G. Y. Kim, J. D. Meyer, L. M. He,  and W. Y. Lee, “Synthesis of Hf-doped -NiAl Coating Using a Hot-Wall CVD Reactor by Continuous Doping Procedure,”  pp. 143-158 in Elevated Temperature Coatings: Science and Technology IV.  Edited by J.M. Hampikian, N.B. Dahotre, and J.E. Morral,, The Minerals, Metals & Materials Society, Warrendale, 2001.
     
  • Y. Zhang, J.A. Haynes, W.Y. Lee, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw, “Effects of Pt Incorporation on the Isothermal Oxidation Behavior of CVD Aluminide Coatings,” Metall. Mater. Trans., 32A, 1727-1741 (2001).
     
  • G.Y. Kim, W.Y. Lee, J.A. Haynes, and T.R. Watkins, “Morphological Evolution During the Early Stages of Aluminide Coating Growth on a Single Crystal Ni Superalloy Surface, Metall. Mater. Trans., 32A, 615-624 (2001).
     
  • J.I. Lee, H. Li, M. Libera, W.Y. Lee, H. Wang, and G.N. Morscher, “Role of First SiO2 Layer in a Multilayer SiO2/ZrO2/SiO2 Fiber Coating for SiC/SiC Ceramic Composites, pp. 15-26, in Advances in Ceramic Matrix Composites VI, Ceramic Transactions Vol. 124.  Edited by J.P. Singh, N.P. Bansal, and E. Ustundag, The American Ceramic Society, Westerville, OH, 2001.
     
  • G. Y. Kim, L.M. He, J.D. Meyer, and W. Y. Lee, “Effects of Hf Predeposition on the Morphology of an Aluminide Coating Produced on Single Crystal Ni Superalloy by Chemical Vapor Deposition,” pp.69-78 in Surface Engineering in Materials Science I.  Edited by S. Seal, N.B. Dahotre, J.J. Moore, and B. Mishra, The Minerals, Metals & Materials Society, Warrendale, PA, 2000.
     
  • B.A. Pint, P.F. Tortorellie, I.G. Wright, J.A. Haynes, and W.Y. Lee, “Evaluation of Iron Aluminide Coatings for High-Temperature Corrosion Protection,” pp. ??-?? in the Proceedings of the Annual Conference on Fossil Materials, ORNL Report FMP-00/1, Oak Ridge National Laboratory, Oak Ridge, TN, 2000.
     
  • Y. Zhang, W.Y. Lee, J.A. Haynes, I.G. Wright, B.A. Pint, K.M. Cooley and P.K. Liaw, “Synthesis and Cyclic Oxidation Behavior of a (Ni,Pt)Al Coating on a Desulfurized Ni-Base Superalloy,” Metall. Mater. Trans. A, 30A, 2679 (1999).
     
  • J. A. Haynes, K. M. Cooley, D. P. Stinton, R. A. Lowden, and W. Y. Lee, “Corrosion Resistant CVD Mullite Coatings for Si3N4,” Ceramic Engineering and Science Proceedings, Ceram. Eng. Sic. Proc., 20, 355 (1999).
     
  • W.Y. Lee and G.Y. Kim, “Kinetic Considerations for Processing a Diffusion NiAl Coating Uniformly Doped with a Reactive Element by Chemical Vapor Deposition,” pp. 149-160 in Elevated Temperature Coatings: Science and Technology III. Edited by J. M. Hampikian and N.B. Dahotre, The Minerals, Metals & Materials Society, Warrendale, PA, 1999
     
  • J.A. Haynes, Y. Zhang, W.Y. Lee, B.A. Pint, I.G. Wright, and K.M. Cooley, “Effects of Platinum Additions and Sulfur Impurities on the Microstructure and Scale Adhesion Behavior of Single-Phase CVD Aluminide Bond Coatings,”  pp. 185-196 in Elevated Temperature Coatings: Science and Technology III.  Edited by J. M. Hampikian and N.B. Dahotre, The Minerals, Metals & Materials Society, Warrendale, PA, 1999.
     
  • J.D. Meyer and W. Y. Lee, “High-Temperature Stability of Amorphous Al2O3 Deposited on Si and CeO2-Stabilized ZrO2 by Metalorganic Chemical Vapor Deposition,” pp. 103-107 in Properties and Processing of Vapor-Deposited Coatings:  Mat. Res. Soc. Symp. Proc., Vol. 555.  Edited by R.N. Johnson, W.Y. Lee, and M.A. Pickering, and B.W. Sheldon, Materials Research Society, Pittsburgh, PA, 1999.
     
  • T.M. Besmann, J.A. Haynes, K.M. Cooley, V.M. Vaubert, and W.Y. Lee, “Corrosion Resistant Coatings for High Temperature Applications,” pp. 109-118 in Properties and Processing of Vapor-Deposited Coatings:  Mat. Res. Soc. Symp. Proc., Vol. 555.  Edited by R.N. Johnson, W.Y. Lee, and M.A. Pickering, and B.W. Sheldon, Materials Research Society, Pittsburgh, PA, 1999.
     
  • W.Y. Lee, E. Lara-Curzio, and K.L. More, “Multilayered Multifunctional Oxide Coating Concept for Satisfying Complex Interface Materials Criteria in Ceramic Matrix Composites,” J. Am. Ceram. Soc., 81 [3], 717 (1998).
     
  • W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, and P.K. Liaw, “Effects of Sulfur Impurity on the Scale Adhesion Behavior of a Desulfurized Ni-based Superalloy Aluminized by Chemical Vapor Deposition,” Metall. Mater. Trans. A, 29A, 833 (1998).
     
  • T.M. Besmann, W.Y. Lee, J.P. Young, and H. Xiao, “Boron Nitride Coatings and Materials for Use in Aggressive Environments,” pp. 247-252 in Covalently Bonded Disordered Thin-Film Materials:  Mat. Res. Soc. Symp. Proc., Vol. 498.  Edited by M.P. Siegal, W.I. Milne, and J.E. Jaskie,  Materials Research Society, Pittsburgh, PA, 1998.
     
  • B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prübner, and K.B. Alexander, “Substrate and Bond Coat Compositions:  Factors Affecting Alumina Scale Adhesion,” Mat. Sci. Eng., A245, 201 (1998).
     
  • Y.W. Bae, W.Y. Lee, T.M. Besmann, O.B. Cavin, and T.R. Watkins, “Effects of Processing Parameters on Al2O3 Coating Deposited on Ni Substrates by Reacting AlCl3 and H2/CO2 Gas Mixtures,” J. Am. Ceram. Soc., 81, 1945 (1998).
     
  • I.G. Wright, B.A. Pint, W.Y. Lee, K.B. Alexander, and K. Prübner, “Some Effects of Metallic Substrate Composition on Degradation of Thermal Barrier Coatings,”  pp. ??-??, in Proceedings of Institute of Materials Conference on Surface Engineering, Edinburgh, United Kingdom, 1997.
     
  • M.A. Borst, W.Y. Lee, Y. Zhang, and P.K. Liaw, “Preparation and Characterization of Chemically Vapor Deposited ZrO2 Coating on Nickel and Ceramic Fiber Substrates,” J. Am. Ceram. Soc., 80, 1591 (1997).
     
  • W.P. Parks, E.E. Hoffman, W.Y. Lee, and I.G. Wright, “Thermal Barrier Coatings Issues in Advanced Land-Based Gas Turbines, J. Thermal Spray Technology, 6 [2], 187 (1997).
     
  • W.Y. Lee, D.P. Stinton, C.C. Berndt, F. Erdogan, Y.D. Lee, Z. Mutasim, “Concept of Functionally Graded Materials for Advanced Thermal Barrier Coating Applications:  A Review,” J. Am. Ceram. Soc., 79 [12], 3003 (1996).
     
  • W.Y. Lee, K.M. Cooley, C.C. Berndt, D.L. Joslin, and D.P. Stinton, “High-Temperature Chemical Stability of Plasma Sprayed Ca0.5Sr0.5Zr4P6O24 Coatings on Nicalon/SiC Ceramic Matrix Composite and Ni-Based Superalloy Substrates,” J. Am. Ceram. Soc., 79 [10], 2759 (1996).
     
  • W.Y. Lee, “Microstructure and Properties of Multiphase and Functionally Graded Materials Prepared by Chemical Vapor Deposition,” pp. 629-636 in the Proceedings of the 13th International Conference on Chemical Vapor Deposition.  Edited by T.M. Besmann, M.D. Allendorf, McD. Robinson, and R.K. Ulrich, The Electrochemical Society, Pennington, NJ, 1996.
     
  • W.Y. Lee, K.L. More, D.P. Stinton, and Y.W. Bae, "Characterization of Si3N4 Coated with Chemically Vapor Deposited Mullite after Na2SO4 Induced Corrosion," J. Am. Ceram. Soc., 79 [9], 2489 (1996).
     
  • I.G. Wright, W.Y. Lee, and B.A. Pint, “High-Temperature Corrosion Issues in Advanced Gas Turbines Systems Intended for Power Generation,”  Paper No. 143 in the Proceedings of the NACE International Annual Conference and Exposition, NACE International, Houston, TX (1996).
     
  • W.Y. Lee, D.P. Stinton, and D.L. Joslin, "Interaction of Low-Expansion NZP Ceramics with Na2SO4 at 1000˚C, J. Am. Ceram. Soc., 79 [2], 484 (1996).
     
  • Y.W. Bae, W.Y. Lee, C.S. Yust, P.J. Blau, and T.M. Besmann, "Preparation and Friction Characteristics of Self-Lubricating TiN+MoS2 Composite Coatings," Mater. Sci. Eng., A209, 372 (1996).
     
  • Y.W. Bae, W.Y. Lee, C.S. Yust, P.J. Blau, and T.M. Besmann, "Synthesis and Friction Behavior of Chemically Vapor Deposited Composite Coatings Containing TiN and MoS2 Phases," J. Am. Ceram. Soc., 79 [4], 819 (1996).
     
  • W.Y. Lee, Y.W. Bae, and K.L. More, "Synthesis of Functionally Graded Metal-Ceramic Microstructures by Chemical Vapor Deposition," J. Mater. Res., 10 [12], 3000 (1995).
     
  • W.Y. Lee, Y.W. Bae, and D.P. Stinton, "Na2SO4 Induced Corrosion of Si3N4 Coated with Chemically Vapor Deposited Ta2O5," J. Am. Ceram. Soc., 78 [7], 1927 (1995).
     
  • Y.W. Bae, W.Y. Lee, and D.P. Stinton, "Effects of Temperature and Reagent Concentration on the Morphology of Chemically Vapor Deposited b-Ta2O5, J. Am. Ceram. Soc., 78 [5], 1297 (1995).
     
  • Y.W. Bae, W.Y. Lee, T.M. Besmann, and P.J. Blau, "Nanoscale Hardness and Microfriction of Titanium Nitride Films Deposited from the Reaction of Tetrakis(Dimethylamino) Titanium with Ammonia, Appl. Phys. Lett., 66 [15], 1895 (1995).
     
  • W.Y. Lee and K.L. More, "Crystal Orientation and Near-interface Structure of Chemically Vapor Deposited MoS2 Films," J. Mater. Res., 10 [1], 49 (1995).
     
  • Y.W. Bae, W.Y. Lee, T.M. Besmann, P.J. Blau, K.L. More, and D.N. Braski, "Self-lubricating, TiN-MoS2 Composite Coatings Produced by Simultaneous Deposition from Ti((CH3)2N)4/NH3/MoF6/H2S Gas Mixtures", pp. 231-236 in Chemical Vapor Deposition of Refractory Metals and Ceramics III:  Mat. Res. Soc. Symp. Proc., Vol. 363.  Edited by B.M. Gallois, W.Y. Lee, and M.A. Pickering, Materials Research Society, Pittsburgh, PA, 1995.
     
  • Y.W. Bae, W.Y. Lee, T.M. Besmann, P.J. Blau, and L. Riester, "Synthesis and Selected Micro-mechanical Properties of Titanium Nitride Thin Films by the Pyrolysis of Tetrakis Titanium in Ammonia", pp. 245-250 in Chemical Vapor Deposition of Refractory Metals and Ceramics III:  Mat. Res. Soc. Symp. Proc., Vol. 363. Edited by B.M. Gallois, W.Y. Lee, and M.A. Pickering, Materials Research Society, Pittsburgh, PA, 1995.
     
  • W.Y. Lee, T.M. Besmann, and M.W. Scott, "Preparation of MoS2 Thin Films by Chemical Vapor Deposition," J. Mater. Res., 9 [6], 1474 (1994).
     
  • W.Y. Lee, "Effects of Initial Substrate Surface on Microstructure of Si3N4 Deposited by LPCVD," pp. 665-668 in Evolution of Surface and Thin Film Microstructure; Mat. Res. Soc. Symp. Proc. Vol. 280.  Edited by H.A. Atwater, E. Grabow, E. Chason, and M. Lagally, Materials Research Society, Pittsburgh, PA., 1993.
     
  • W.Y. Lee and J.R. Strife, "Effects of SiF4 and NH3 Concentrations on the Low-Pressure CVD of Polycrystalline a-Si3N4," J. Am. Ceram. Soc., 76, 542 (1993).
     
  • W.Y. Lee, J.R. Strife, and R.D. Veltri, "Low-Pressure Chemical Vapor Deposition of a-Si3N4 from NH3 and SiF4:  Nucleation and Growth Characteristics," J. Am. Ceram. Soc., 75, 2803 (1992).
     
  • W.Y. Lee, J.R. Strife, and R.D. Veltri, "Low-Pressure Chemical Vapor Deposition of a-Si3N4 from NH3 and SiF4:  Kinetic Characteristics,"  J. Am. Ceram. Soc.  75, 2200 (1992).
     
  • W.Y. Lee, J.R. Strife, and R.D. Veltri, "Kinetic Characteristics of Si3N4 CVD," pp. 47-52 in Chemical Vapor Deposition of Refractory Metals and Ceramics II: Mat. Res. Soc. Symp. Proc., Vol. 250.  Edited by T.M. Besmann, B.M. Gallois, and J.W. Warren, Materials Research Society, Pittsburgh, PA, 1992.
     
  • S.O. Hay, R.D. Veltri, W.Y. Lee, and W.C. Roman, "In-Situ CARS Detection of H2 in the CVD of Si3N4," Paper No. 51 in Proceedings of the SPIE Symposium on Laser Spectroscopy, Vol. 1435, SPIE, Bellingham, WA, 1991
     
  • W.Y. Lee, W.J. Lackey, P.K. Agrawal, and G.B. Freeman, "Simultaneous Chemical Vapor Deposition of Boron Nitride and Aluminum Nitride," J. Am. Ceram. Soc., 74, 2649 (1991).
     
  • W.Y. Lee, W.J. Lackey, G.B. Freeman, P.K. Agrawal, and D.J. Twait, "Preparation of Dispersed Phase Ceramic BN+AlN Composite Coatings by Chemical Vapor Deposition," J. Am. Ceram. Soc., 74,  2136 (1991).
     
  • W.Y. Lee, W.J. Lackey, and P.K. Agrawal, "Kinetic Analysis of Chemical Vapor Deposition of Boron Nitride," J. Am. Ceram. Soc., 74, 2642 (1991).
     
  • W.Y. Lee, W.J. Lackey, and P.K. Agrawal, "Kinetic and Thermodynamic Analyses of Chemical Vapor Deposition of Aluminum Nitride, J. Am. Ceram. Soc., 74, 1821 (1991).
     
  • G.B. Freeman, W.Y. Lee, W.J. Lackey, J.H. Hanigofsky, and K.L. More, "Grain Structure and Growth of Dispersed Phase BN+AlN Coatings Grown Via Chemical Vapor Deposition," pp. 155-160 in Evolution of Thin-Film and Surface Microstructure: Mat. Res. Soc. Symp. Proc., Vol. 202.  Edited by C.V. Thompson, J.Y. Tsao, and D.J. Srolovitz, Materials Research Society, Pittsburgh, PA, 1991.
     
  • J.A. Hanigofsky, K.L. More, W.J. Lackey, W.Y. Lee, and G.B. Freeman, "Composition and Microstructure of Chemically Vapor Deposited BN, AlN, BN+AlN Composites," J. Am. Ceram. Soc., 74, 301 (1991).
     
  • W.Y. Lee, W.J. Lackey, and P.K. Agrawal, "Dispersed Phase BN+AlN Composites Prepared by CVD," pp. 580-588 in Proceedings of the 11th Inter. Conf. on Chemical Vapor Deposition.  Edited by K.E. Spear and G.W. Cullen, The Electrochemical Society, Pennington, NJ, 1990.
     
  • D.J. Twait, W.J. Lackey, A.W. Smith, W.Y. Lee, and J.A. Hanigofsky, "Thermodynamic Analysis of Chemical Vapor Deposition of BN+AlN Composite Coatings," J. Am. Ceram. Soc., 73, 1511 (1990).
     
  • G.B. Freeman, W.Y. Lee, and W.J Lackey, "Microstructural Study of Dispersed Phase Ceramic BN-AlN Composite Coatings by Chemical Vapor Deposition," p.1026 in Proceedings of the XII International Congress for Electron Microscopy, San Francisco Press, Inc., San Francisco, CA, 1990.
     
  • W.Y. Lee, R.H. Raythatha, and B.J. Tatarchuk, "Pillared Clay Catalysts Containing Mixed-Metal Complexes:  I. Preparation and Characterization,"  J. Catalysis, 115, 159 (1989).
     
  • W.Y. Lee and B.J. Tatarchuk, "Mössbauer Studies of High Surface Area Pillared Clays Containing Mixed Metal Complexes," Hyperfine Interactions, 41, 661 (1988).

 

List of Patents
 
  • W.Y. Lee, L.T. Le, M. Ervin, B. Fuchs, and J. Zunino, “Inkjet-Printed Electronic Components from Graphene Oxide, U.S. Patent 8,810,996 (2014).
     
  • V. Stepanov, A. R. Di Stasio, H. Qiu, W.Y. Lee, Insensitive Explosives and Process therefore, U.S. Patent 8,936,689 (2015).
     
  • W. Y. Lee, Y.-F. Su, L. He, and J. D. Meyer, “Alpha Al2O3 Nanotemplates,” U.S. Patent 7,238,420 (2007).
     
  • W. Y. Lee, Y.-F. Su, L. He, and J. D. Meyer, “Method for Preparing a-Dialuminum Trioxide:  Nanotemplates,” U.S. Patent 6,808,760 (2004).
     
  • E. Lara-Curzio, K. L. More, and W. Y. Lee, “Oxidation-Resistant Interfacial Coatings for Fiber-Reinforced Ceramic Composites,” U.S. Patent 6,322,889 (2001).
     
  • T.M. Besmann, W.Y. Lee, B. J. Blau, and Y.W. Bae, “CVD Methods of Forming Self-Lubricating Composites,” U.S. Patent 5,843,533 (1998).
     
  • T.M. Besmann, W.Y. Lee, B. J. Blau, and Y.W. Bae, “Composite Coatings for Low Friction and Wear Applications and Method Thereof,” U.S. Patent 5,709,936 (1998).
     
  • D.P. Stinton and W.Y. Lee, “High-Temperature Ceramic Articles Having Corrosion Resistant Coating,” U.S. Patent 5,672,420 (1997).
     
  • R.H. Raythatha, B.J. Tatarchuk, and W.Y. Lee, “Mixed Pillared Clay Reduction Products and Method of Preparation,” U.S. Patent 4,920,086 (1990).