"Unusual fracture surface morphology of fatigued carbon nanofiber/poly(ether ether ketone) composites." S.F. Bartolucci, G. Mago, F.T. Fisher, E. Troiano, and D.M. Kalyon. Carbon 50, 2347 (2012)

"Tunable Wetting Mechanism of Polypyrrole Surfaces and Low-Voltage Droplet Manipulation via Redox." Y. Tsai, C.-H. Choi, N. Gao and E. H. Yang. Langmuir 7, 27, 4249–4256 (2011)

"Localized States and Resultant Band Bending in Graphene Antidot Superlattices." M. Begliarbekov, O. Sul, J. Santanello, N. Ai, X. Zhang, E.H. Yang, and S. Strauf. Nano Letters 3, 11, 1254–1258 (2011)

"A Study on Carbon-Nanotube Local Oxidation Lithography Using an Atomic Force Microscope." K. Kumar, O. Sul, S. Strauf, D.S. Choi, F. Fisher, M.G. Prasad, and E-H. Yang. IEEE Transactions on Nanotechnology 4, 10, 849-854 (2011)

"Towards an autonomous self-tuning vibration energy harvesting device for wireless sensor network applications." V.R. Challa, M.G. Prasad, and F.T. Fisher. Smart Materials and Structures 20, 025004 (2011)

"Vibration energy harvesting for aerospace applications." V. Challa, M.G. Prasad, and F.T. Fisher. Journal of Aerospace Sciences and Technologies 63, 1 (2011)

"Nanocomposites of nylon-11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing." G. Mago, D.M. Kalyon, and F.T. Fisher. Journal of Polymer Science: Part B Polymer Physics 49, 1311 (2011)

"Determination of Mechanical Properties and Actuation Behaviors of Polypyrrole-Copper Bimorph Nanoactuators." O.Sul, S. Jang and E. H. Yang. IEEE Trans. Nanotechnology (TNANO) 5, 10, 985-990 (2011)

"A Study on Nanoscale Carbon Nanotube Local Oxidation Lithography using an Atomic Force Microscope." K. Kumar, O. Sul, S. Strauf, F. Fisher, D. S. Choi, M. G. Prasad, and E. H. Yang. IEEE Trans. Nanotechnology (TNANO) 4, 10, 849-854 (2011)

"Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity." S.H. Modi, S. Bartolucci, H. Gevgilili, K. Dikovics, G. Mago, F.T. Fisher, and D.M. Kalyon. Polymer 51, 5236-5244 (2010)

"Editorial: Polymer nanocomposite processing, characterization, and applications." G. Mago, D.M. Kalyon, S.C. Jana, and F.T. Fisher. Journal of Nanomaterials 5, 325807 (2010)

"Determination of Edge Purity in Bilayer Graphene Using micro-Raman Spectrosopy." M. Begliarbekov, O. Sul, S. Kalliakos, E. H. Yang, S. Strauf. Applied Physics Letters 97, 031908 (2010)

"Fabrication and Characterization of a Ni-Al2O3 Bimorph Nanoactuator ." O.Sul, S. Jang, D. S. Choi and E. H. Yang. Nanoscience and Nanotechnology Letters 2, 2, 129–132 (2010)

"A Systematic Study of Graphite Local Oxidation Lithography Parameters Using an Atomic Force Microscope." K. Kumar, S. Strauf, and E.H. Yang. Nanoscience and Nanotechnology Letters 2, 2, 185–188 (2010)

"Self-Assembly of Nanowires at Three-Phase Contact Lines on Superhydrophobic Surfaces." Y.-T. Tsai, W. Xu, E.H. Yang and C.-H. Choi. Nanoscience and Nanotechnology Letters 2, 2, 150–156 (2010)

"Transconductance and Coulomb blockade properties of in-plane grown carbon nanotube field effect transistors." N. Ai, O. Sul, M. Begliarbekov, Q. Song, K. Kumar, D. S. Choi, E. H. Yang, S. Strauf. Nanoscience and Nanotechnology Letters 2, 2, 73-78 (2010)

"Electrochemical Characterization of Tin Quantum Dots Grown on a Carbon Nanotube Mat as Anodes for Battery Applications." Z. Zhang, N. Dahal, K. Xu, and D. Choi, E. H. Yang and J. R. Park. Nanoscience and Nanotechnology Letters 2, 2, 86-88 (2010)

"Manipulation of Low-Dimensional Nanomaterials Using Water Meniscus." O.Sul, C. Tsai, N. Gao and E. H. Yang. Nanoscience and Nanotechnology Letters 2, 2, 133–138 (2010)

"Engineered Low-Dimensional Nanomaterials for Sensors, Actuators and Electronics." E. H. Yang. Reliability Special II, Journal of Micro/Nanolithography, MEMS, and MOEMS (JM3) 9, 04, 041103 (2010)

"An Experimental Study on Ferromagnetic Nickel Nanowires Functionalized with Antibody for Cell Separation." N. Gao, H. Wang and E. H Yang. Nanotechnology 21, 105107 (2010)

"A nickel nanowire diluter operating through the principle of the dielectrophoretic attraction force." J. Yang, H. J. Yoon, E. H. Yang, S. S. Yang. Transactions of the Korean Institute of Electrical Engineers 2, 59, 385-389 (2010)

"The Cheliceral Claw of Acutiramus (Arthopoda: Eurypterida): Functional Analysis Based on Morphology and Engineering Principles." R. Laub, V. Tollerton, & R. Berkof. Bulletin of the Buffalo Society of Natural Sciences 39, 29-42 (2010)

"Towards A Fully Automated High-Throughput Phototransfection System." D. Cappelleri, A. Halasz, J-Y. Sul, T. Kim, J. Eberwine, and V. Kumar. Journal of the Association for Laboratory Automation (JALA) 15, 329-341 (2010)

"1.6 V Nanogenerator for mechanical energy harvesting using PZT nanofibers." Xi Chen, Shiyou Xu, Nan Yao and Yong Shi. Nano Letters 6, 10, 2133-2137 (2010)

"Effect of shearing on crystallization behavior and morphology of PVDF nanocomposites." G. Mago, F.T. Fisher, and D.M. Kalyon . Journal of Nanoscience and Nanotechnology 9, 3330-3340 (2009)

"Polymer crystallization and precipitation-induced wrapping of carbon nanofibers with PBT ." G. Mago, D.M. Kalyon, and F.T. Fisher. Journal of Applied Polymer Science 114, 1312-1319 (2009)

"Coupled piezoelectric-electromagnetic energy harvesting technique for increased power output through damping matching." V. Challa, M.G. Prasad, and F.T. Fisher. Smart Materials and Structures 18, 095029 (2009)

"A Multi-Walled Carbon Nanotube-Aluminum Bimorph Nanoactuator." O. Sul ad E. H. Yang. Nanotechnology 20, 095502 (2009)

"Hybrid Linear Microactuators and Their Control Models for Mirror Shape Correction." K.Shcheglov, X. Jiang, R. Toda, Z. Chang, and E. H. Yang. Journal of Micro-Nano Mechatronics 4, 159-167 (2009)

"Fabrication of Buried Nanochannels by Transferring." D.S. Choi and E. H. Yang. Journal of Sensors and Materials 6, 21, 315-319 (2009)

"A Study on Field Emission Characteristics of Planar Graphene Sheets." S. W. Lee, S. S. Lee and E. H. Yang. Nanoscale Research Letters 4, 1218–1221 (2009)

"Step-Edge Calibration of Torsional Sensitivity for Lateral Force Microscopy." O.Sul, S. Jang and E. H. Yang. Measurement Science and Technology 20, 115104 (2009)

"Power generation from piezoelectric lead zirconate titanate nanotubes." S. Xu, Y. Shi. J. of Physics D: Applied Physics 5pp, 42, 085301 (2009)

"Potential measurement from a single lead zirconate titanate nanofiber using a nanomanipulator." Xi.Chen, S. Xu, N. Yao, W. Xu & Y. Shi. Applied Physics Letters 94, 253113 (2009)

"Low temperature high sensor response nano gas sensor using ITO nanofibers." Shiyou Xu, Yong Shi. Sensors and Actuators B: Chemical 1, 143, 71-75 (2009)

"Gas sensing properties of indium tin oxide nanofibers." Shiyou Xu, Yong Shi. Sensors & Transducers Journal 11, 110, 47-55 (2009)

"Content-rich, interactive online laboratory systems." Aziz, E.-S., Esche, S. K., Chassapis, C.. Computer Applications in Engineering Education J. 1, 17, 61-79 (2009)

"Monte Carlo simulation of grain growth of single-phase systems with anisotropic boundary energies." Yu, Q., Nosonovsky, M. and Esche, S. K.. International J. of Mechanical Sciences 6, 51, 434-442 (2009)

"Scaling of Monte Carlo simulations of grain growth in metals." Nosonovsky, M., Zhang, X. and Esche, S. K.. Modelling and Simulation in Materials Science and Engineering 2, 17, 13 (2009)

"Content-rich interactive online laboratory systems." Αziz, E.S., Esche, S. Κ., Chassapis, C.. Computer Applications in Engineering Education Journal 1, 17, 6Ι -79 (2009)

"A vibration energy harvesting device with bi-directional resonance frequency tunability." V. Challa, Y. Shi, M.G. Prasad, and F.T. Fisher. Smart Materials and Structures 17, 015035 (2008)

"Effects of multiwalled carbon nanotubes on the shear-induced crystallization behavior of poly(butylene terephthalate)." G. Mago, F.T. Fisher, and D.M. Kaylon . Macromolecules 41, 8103-8113 (2008)

"Membranes of Polyvinylidene fluoride (PVDF) and PVDF nanocomposites with carbon nanotubes via immersion precipitation." G. Mago, D.M. Kalyon, and F.T. Fisher . Journal of Nanomaterials (special issue on Nanomechanics and Nanostructured Multifunctional Materials) 3, 759825 (2008)

"Enhanced solubility of single-wall carbon nanotubes in a deuterated acid mixture." T. Ramanathan, F.T. Fisher, R.S. Ruoff, and L.C. Brinson. Research Letters in Nanotechnology 1, 296928 (2008)

"Site-Specific Magnetic Assembly of Ferromagnetic Nanowire." Y. Rheem, C. Hangarter, E.-H. Yang, N. V. Myung, and B. Yoo. IEEE Transactions on Nanotechnology 7, 251-255 (2008)

"Automatic Pill Bottle Opener." J. DaSilva, J. Peterson, M. Kocak, W. Indoe, & R. Berkof. Pharmaceutical Engineering Vol. 26, No. 1, pp. 62-70 (2008)

"A vibration energy harvesting device with bidirectional resonance frequency tenability." V. R. Challa, M. G. Prasad, Y. Shi, F. T. Fisher. Smart Materials and Structures 17, 15-35 (2008)

"Dynamic Assignment in Distributed Motion Planning with Local Coordination." M. M. Zavlanos and G. J. Pappas. IEEE Transactions on Robotics 1, 24, 232-242 (2008)

"A Dynamical Systems Approach to Weighted Graph Matching." M. M. Zavlanos and G. J. Pappas. Automatica 11, 44, 2817-2824 (2008)

"Distributed Connectivity Control of Mobile Networks." M. M. Zavlanos and G. J. Pappas. IEEE Transactions on Robotics 6, 24, 1416-1428 (2008)

"Computational and Experimental Investigations of Turbulent Flow Past Projectiles." I. Mehmedagic, P. Carlucci, D. Carlucci, and S. Thangam. Bulletin of American Physical Society 53, 61-62 (2008)

"Evolution of stress and deformations in high-temperature polymer matrix composites during thermo-oxidative aging." K. Pochiraju, G. P. Tandon, G. J. Mechanics of Time-Dependent Materials 1, 12, 45-68 (2008)

"Modeling Long-Term Degradation due to Moisture and Oxygen in Polymeric Matrix Composites." Y. Yu and K. Pochiraju. Materials Science and Engineering, Part-A 1-2, 498, 162-165 (2008)

"Thermo-oxidative Behavior of High Temperature PMR-15 Resin and Composites." G. Tandon K. Pochiraju and G. Schoeppner. Materials Science and Engineering, Part-A 1-2, 498, 150-161 (2008)

"Enhanced AC Electrothermal Fluidic Pumping in Microgrooved Channels." E Du, S. Manoochehri. J. of Applied Physics 104, 064902 (2008)

"A paradox of decreasing entropy in multiscale Monte Carlo grain growth simulations." Nosonovsky, M., Esche, S. K.. Entropy 10, 49-54 (2008)

"Multiscale effects in crystal grain growth and physical properties of metals." Nosonovsky, M., Esche, S. K.. Physical Chemistry Chemical Physics 10, 5192-5195 (2008)

"On the accuracy of Monte Carlo Potts models for grain growth." Yu, Q., Nosonovsky, M., Esche, S. K.. J. of Computational Methods in Sciences and Engineering 4-6, 8, 227-243 (2008)

"Piloting a game-based virtual learning environment." Arango, Ρ., Altuger, G., Αziz, E-S., Esche, S. Κ.. Computers in Education Journal 4, 18, 82 -91 (2008)

"Hierarchical Magnetic Assembly of Nanowires." C. M. Hangarter, Y. Rheem, B. Yoo, E. H. Yang, and N. V. Myung. IOP Nanotechnology 20, 18, 205-305 (2007)

"Development of MEMS-Based Piezoelectric Microvalve Technologies – Fabrication, Characterization and Modeling." E. H. Yang, C. Lee and J. Khodadadi. Journal of Sensors and Materials, Special Issue on Microvalve 19, 1-18 (2007)

"Normally-Latched, Large-Stroke, Inchworm Microactuatorv." R. Toda and E. H. Yang. Journal of Micromechanics and Microengineering 17, 1715-1720 (2007)

"Potential Fields for Maintaining Connectivity of Mobile Networks." M. M. Zavlanos and G. J. Pappas. IEEE Transactions on Robotics 4, 23, 812-816 (2007)

"Modeling Compressible Turbulent Flow Past a Blunt Nosed Body with Spinning Base." I. Mehmedagic, D. Carlucci, and S. Thangam. Bulletin of American Physical Society 52, 61 (2007)

"Computational study of the flow around a projectile moving through a gun barrel." I. Mehmedagic, D. Carlucci, S. Thangam. Proc. of 23rd International Symposium on Ballistics 2, 507-514 (2007)

"An Embedded System for Knowledge-Based Cost Evalutaion of Molded Parts." K. H. Ko, K Pochiraju and S. Manoochechri. Journal of Knowledge-Based Systems 3, 20, pp 291-299 (2007)

"Dynamic Evolution of Information Complexity for Analysis of Design and Development." KH Ko, K Pochiraju and S Manoochehri. JSME Journal of Advanced Mechanical Design 1, 1, pp:36-47 (2007)

"Characterization of temperature-dependent moisture diffusivity in PMR-15 resin." Y. Yu and K. Pochiraju. J. of Applied Polymer Science 2, 106, 1281-1290 (2007)

"An Embedded System for Knowledge-Based Cost Evaluation of Molded Parts." K. H. Ko, K. Pochiraju, S. Manoochehri. J. of Knowledge-Based Systems 3, 20, 291-299 (2007)

"Immersive collaborative laboratory simulations using a game engine.." Chang, C., Kodman, D., Chassapis, C. & Esche, S. K.. Computers in Education Journal Vol. 17, No. 3, pp. 85-92 (2007)

"A model for evaluating the effectiveness of remote engineering laboratories and simulations in education." Nickerson, J. V., Corter, J. E., Esche, S. K. & Chassapis, C.. Computers & Education - An International Journal Vol. 49, No. 3,, pp. 708-725 (2007)

"Α model for evaluating the effectiveness of remote engineering laboratories and simulations in education." Nickerson, J . V., Corter , J .Ε., Esche, S. Κ., Chassapis, C.. Computers & Education -Αn Intern. Journal 3, 49, 708-725 (2007)

"Constructing reality: a study of remote, hands-on and simulated laboratories." Corter, J. Ε., Nickerson, J. V., Esche, S. Κ., Chassapis, C., Im, S., Ma, J. ACM Transactions on Computer-Human Interaction 2, 14, Article 7, 27 (2007)

"Immersive collaborative laboratory simulations using a game engine." Chang, C., Kodman, D., Chassapis, C., Esche, S. Κ.. Computers in Education Journal 3, 17, 85-92 (2007)

"Simulating the Dynamics of Spouted-Bed Nuclear Fuel Coaters." Pannala S., Daw C.S., Finney C.E.A., Boyalakuntla D.S., Syamlal M., O’Brien T.J.. CVD and Powders 13, 481-490 (2007)

"Reinforcement mechanisms in MWCNT-filled polycarbonate." A. Eitan, F.T. Fisher, R. Andrews, L.C. Brinson, and L.S. Schadler. Composites Science and Technology 66, 1159 (2006)

"Modeling of Frictional Gas Flow Effects in a Piezoelectrically Actuated High-pressure Microvalve under Low Leak-rate Conditions." C. A. Johnson, J. M. Khodadadi and E. H. Yang,. Journal of Micromechanics and Microengineering 16, 2771-2782 (2006)

"Thin-Film Piezoelectric Unimorph Actuator-based Deformable Mirror with a Transferred Silicon Membrane." E. H. Yang, Y. Hishinuma, J.-G. Cheng, S. Trolier-McKinstry, E. Bloemhof, and B. M. Levine. IEEE/ASME Journal of Microelectromechanical Systems 5, 15, 1214-1225 (2006)

"Fabrication, Characterization and Computational Modeling of a Piezoelectrically Actuated Microvalve for Liquid Flow Control,." C. Lee, E. H. Yang, S. M. Saeidi and J. Khodadadi. IEEE/ASME Journal of Microelectromechanical Systems 3, 15, 686-696 (2006)

"Piezoelectric Unimorph Microactuator Arrays for Single-Crystal Silicon Continuous Membrane Deformable Mirror." Y. Hishinuma and E. H. Yang. IEEE/ASME Journal of Microelectromechanical Systems 2, 15, 370-379 (2006)

"Fabrication and mechanical property of nano piezoelectric fibers." S. Xu, Y. Shi, S.-G. Kim. Nanotechnology 17, 4497-4501 (2006)

"A Feedback Stabi¬lization and Collision Avoidance Scheme for Multiple Independent Non-Point Agents." D. V. Dimarogonas, S. G. Loizou, K. J. Kyriakopoulos, and M. M. Zavlanos. Automatica 2, 42, 229-243 (2006)

"Modeling and Simulation of Turbulent Flows: A Summary on Contributions by Charles Speziale." D. Siginer and S. Thangam. J. of Applied Mechanics 73, 353-359 (2006)

"Development of a Continuous Model for Simulation of Turbulent Flows." M. Y. Hussaini, S. Thangam, S. Woodruff, and Y. Zhou. J. of Applied Mechanics 73, 441-448 (2006)

"Development and Application of an Anisotropic Two-Equation Model for Flows with Swirl and Curvature." X. Wang and S. Thangam. J. of Applied Mechanics 73, 397-404 (2006)

"A scalable platform for remote and virtual laboratories." Aziz, E.-S., Esche, S. K. & Chassapis, C.. World Transactions on Engineering and Technology Education Vol. 5. No. 3, pp. 445-448 (2006)

"On the integration of remote experimentation into undergraduate laboratories - technical implementation." Esche, S. K.. International Journal of Instructional Media Vol. 33, No. 1, pp. 43-53 (2006)

"Α scalable platform for remote and virtuallaboratories." Aziz, E.-S., Esche, S. Κ., Chassapis, C. World Transactions on Engineering and Technology Education 3, 5, 445-448 (2006)

"Experimental and Computational Studies of wake flows." I. Mehmedagic, S. Thangam, D. Carlucci, and X. Wang. Bulletin of American Physical Society 50, 148-149 (2005)

"Extraction of Singular Stress Fields Using the Axisymmetric Single-Fiber Micromechanics Model." K. V. Pochiraju and G. P. Tandon. International Journal of Fracture 132, pp: 329-349 (2005)

"A multi-scale approach for microstructure prediction in thermo-mechanical processing of metals." Yu, Q. & Esche, S. K.. Journal of Materials Processing Technology Vol. 169, No. 3, pp. 493-502 (2005)

"On the integration of remote experimentation into undergraduate laboratories - pedagogical approach." Esche, S. K. International Journal of Instructional Media Vol. 32, No. 4, pp. 397-407 (2005)

"Modeling of grain growth characteristics in three-dimensional domains and two-dimensional cross sections." Yu, Q., Wu, Y. & Esche, S. K.. Metallurgical and Materials Transactions A Vol. 36A, pp. 1661-1666 (2005)

"Α decision-making framework model for design and manufacturing of mechanical transmission system development." Αziz, Ε. and Chassapis, C.. Engineering with Computers Journal 21, 164-176 (2005)

"Spectral response and effective viscoelastic properties of MWNT-reinforced polycarbonate." F. T. Fisher, A. Eitan, R, Andrews, L.C. Brinson, and L. S. Schadler. Advanced Composites Letters 2, 13, 105-111 (2004)

"Realization of nanoscale resolution with a micromachined thermally actuated testing stage." S. Lu, D. A. Dikin, S. Zhang, F.T. Fisher, J. Lee, and R. S. Ruoff. Review of Scientific Instruments 6, 75, 2154-2162 (2004)

"Leak-Tight Piezoelectric Microvalve for High-Pressure Gas Micropropulsion." E. H. Yang, C. S. Lee, J. Mueller and T. George. IEEE/ASME Journal of Microelectromechanical Systems 5, 13, 799-807 (2004)

"Simulation and Analysis of Rigid/Foil Electrolytic In-Process Dressing (ELID) Systems for Grinding." Z. Zhu, X. Wang, and S. Thangam. . of Manufacturing Science and Technology (ASME) 126, 565-570 (2004)

"Current status and future needs in turbulence modeling: an aeronautical perspective & Turbulence modeling: contributions of Charles G. Speziale." D. M. Bushnell and S. Thangam. J. of Theoretical and Computational Fluid Dynamics 17, 297-298 (2004)

"Computational and Experimental Investigations of flow past a Spinning Body." I. Mehmedagic, S. Thangam, D. Carlucci, and X. Wang. Bulletin of American Physical Society 49, 73 (2004)

"Mesoscopic computer modeling of microstructure evolution within an object-oriented simulation framework.." Yu, Q. & Esche, S. K.. International Journal of Computational Engineering Science Vol. 5, No. 3, pp. 451-469 (2004)

"Direct observation of polymer sheathing in carbon nanotube-polycarbonate composites." W. Ding, A. Eitan, F.T. Fisher, X. Chen, D.A. Dikin, R. Andrews, L.C. Brinson, L.S. Schadler, and R.S. Ruoff . Nano Letters 11, 3, 1593-1597 (2003)

"Improvement of thermal and mechanical properties of carbon nanotubes composites through chemical functionalization." C. Velasco-Santos, A.L. Martinez-Hernandez, F.T. Fisher, R.S. Ruoff, and V.M. Castano . Chemistry of Materials 15, 4470-4475 (2003)

"Atomic force microsopy study of clay nanoplatelets and their impurities." R.D. Piner, T.T. Xu, F.T. Fisher, Y. Qiao, and R.S. Ruoff.. Langmuir 19, 19, 7995-8001 (2003)

"Bone-shaped nanomaterials for nanocomposite applications." T.T. Xu, F.T. Fisher, L.C. Brinson, and R.S. Ruoff . Nano Letters 8, 3, 1135-1139 (2003)

"Dynamical-mechanical and thermal analysis of carbon nanotube-methyl-ethyl methaccrylate nanocomposites." C. Velasco-Santos, A.L. Martinez-Hernandez, F. Fisher, R. Ruoff, and V.M. Castano. Journal of Physics D: Applied Physics 36, 1423-1428 (2003)

"Fiber waviness in nanotube-reinforced polymer composites: I. Modulus predictions using effective nanotube properties." Fisher, FT, Bradshaw, RD, and LC Brinson . Composites Science and Technology 11, 63, 1689-1703 (2003)

"Fiber waviness in nanotube-reinforced polymer composites: II. Modelling via numerical approximation of the dilute strain concentration tensor." Bradshaw, RD, FT Fisher, and LC Brinson . Composites Science and Technology 11, 63, 1705-1722 (2003)

"An Overview of MEMS-Based Micropropulsion Developments at JPL." J. Mueller, J. Polk, E. H. Yang, A. Green, V. White, D. Bame, I. Chakraborty, S. Vargo, and R. Reinicke. Acta Astronautica 9-12, 52, 881-895 (2003)

"A Nanochannel Fabrication Technology without Nanolithography." C. Lee, E. H. Yang, N.V. Myung, and T. George. ACS NanoLetters 10, 3, 1339-1340 (2003)

"A Wafer-Scale Membrane Transfer Process for the Fabrication of Optical Quality, Large Continuous Membranes." E. H. Yang and D. V. Wiberg. IEEE/ASME Journal of Microelectromechanical Systems 6, 12, 804-815 (2003)

"Three-dimensional grain growth modeling with a Monte Carlo algorithm." Yu, Q. & Esche, S. K.. Materials Letters Vol. 57, No. 30, pp. 4622-4626 (2003)

"A new perspective on the normal grain growth exponent obtained in two-dimensional Monte Carlo simulations ." Yu, Q. & Esche, S. K.. Modelling and Simulation in Materials Science and Engineering Vol. 11, No. 6, pp. 859-862 (2003)

"An architecture for multi-user remote laboratories." S. K. Esche, C. Chassapis, J. W. Nazalewicz and D. J. Hromin. World Transactions on Engineering and Technology Education 1, 2, 7-11 (2003)

"Effects of nanotube waviness on the modulus of nanotube-reinforced polymers." Fisher, FT, Bradshaw, RD, and LC Brinson . Applied Physics Letters 24, 80, 4647-4649 (2002)

"Knowledge-based rapid design evaluation methodology for die-cast components." Kee Park, K. Pochiraju, C. Chassapis, S. Manoochehri, D. Newport. 1, 10, 67-74 (2002)

"A Monte Carlo algorithm for single phase normal grain growth with improved accuracy and efficiency." Yu, Q. & Esche, S.. Computational Materials Science 3, 27, 259-270 (2002)

"Project-based learning in a course on mechanisms and machine dynamics." Esche, S.. World Transactions on Engineering and Technology Education 2, 1, 201-204 (2002)

"Modeling of grain growth kinetics with Read-Shockley grain boundary energy by a modified Monte Carlo algorithm." Yu, Q. & Esche, S.. Materials Letters 1-2, 56, 47-52 (2002)

"Knowledge-based geometry generation for spur and helical gears." E. Aziz and C. Chassapis. Concurrent Engineering: Research & Applications (CERA) Journal 3, 10, 251-262 (2002)

"Viscoelastic interphases in polymer matrix composites: Theoretical models and finite element analysis." Fisher, FT and LC Brinson. Composites Science and Technology 61, 731-748 (2001)

"Analysis and control of flow past two spinning cylinders in tandem." D. Carlucci and S. Thangam. Bul Amer Phys Soc 46, 141 (2001)

"Fracture Toughness Variations of Injection Molded Long Fiber Reinforced Thermoplastics." F. Gonzalez and C. Chassapis. Journal of Reinforced Plastics and Composites 10, 20, 810-820 (2001)

"Concurrent product and process design in hot forging." S. K. Esche, C. Chassapis and S. Manoochehri. Journal of Concurrent Engineering: Research and Applications 1, 9, 48-54 (2001)

"Modeling of Heat Transfer in Thermoplastic Composite tape Lay-Up Manufacturing." S. Tumkor, N. Turkmen, C. Chassapis, and S. Manoochehri. Journal of International Communications in Heat and Mass Transfer 1, 28, 49-58 (2001)

"Optimal Design of Electronic Systems Utilizing an Integrated Multi-Disciplinary Process." B. D. Mottahed and S. Manoochehri. 4, 23, 699-707 (2000)

"Knowledge-based part and process design for metal forging.." Esche, S., Fidan, I., Chassapis, C. & Manoochehri, S.. 5, 108, 92-99 (2000)

"Numerical and experimental investigation of redrawing of sheet metals.." Esche, S., Ahmetoglu, M., Kinzel, G. & Altan, T. . 1, 98, 17-24 (2000)

"Configuration Design and Optimization of Universal Joints with manufacturing Tolerances." S.R. Hummel and C. Chassapis. Mechanism and Machine Theory 35, 463-476 (2000)

"Knowledge-Based Part and Process Design for Metal Forging." S. K. Esche, I. Fidan, C. Chassapis, and S. Manoochehri. SAE Transactions - Journal of Materials and Manufacturing 5, 108, 92-99 (2000)