Program Overview
In Chemical Engineering, the degrees of Master of Engineering and Doctor of Philosophy are offered, as well the professional degree of Chemical Engineer. Candidates for the degree programs in Chemical Engineering require an undergraduate education in Chemical Engineering. However, a conversion program enables qualified graduates of related disciplines (such as chemistry, mechanical engineering, physics, etc.) to enter the master's program through intensive no-credit courses designed to satisfy deficiencies in undergraduate preparation.

Master of Engineering - Chemical
The Master of Engineering in Chemical Engineering requires 30 graduate credits in an approved plan of study. Credits can be obtained by performing research in the form of a master's thesis.  The program is developed with your objectives in mind.  The curriculum must include the following courses:

MA 530 Applied Mathematics for Engineers and Scientists II Close Applied Mathematics for Engineers and Scientists II Review of first order and second order constant coefficient differential equations, nonhomogeneous equations; series solutions, Bessel and Legendre functions; boundary value problems, Fourier-Bessel series and separation of variables for partial differential equations; classification of partial differential equations; Laplace transform methods; calculus of variations; introduction to finite-difference methods.

CHE 620 Chemical Engineering Thermodynamics Close Chemical Engineering Thermodynamics  This course supplements the clasical undergraduate   thermodynamics course by focusing on physical and thermodynamic properties, and   phase equilibria.  A variety of equations of state, and their applicability,   are introduced as are all of the important liquid activity coefficient   equations.  Customization of both vapor and liquid equations is introduced by   appropriate methods of applied mathematics.  Vapot-liquid, liquid-liquid,   vapor-liquid-liquid and solid-liquid equilibria are considered with rigor.   Industrial applications are employed.  A variety of methods for estimating   physical and thermodynamic properties are introduced.  Students are encouraged to use   commercial software in applications.  The course concludes with an   introduction to statistical thermodynamics.

CHE 630 Theory of Transport Processes Close Theory of Transport Processes Generalized approach to differential and macroscopic balances: constitutive material equations; momentum and energy transport in laminar and turbulent flow; interphase and intraphase transport; dimensionless correlations

CHE 650 Reactor Design Close Reactor Design Analysis of batch and continuous chemical reactions for homogeneous, heterogeneous, catalytic, and non-catalytic reactions; influence of temperature, pressure, reactor size and type, mass and heat transport on yield and product distribution; design criteria based on optimal operating conditions and reactor stability will be developed.

MA 530 Applied Mathematics for Engineers and Scientists II Close Applied Mathematics for Engineers and Scientists II Review of first order and second order constant coefficient differential equations, nonhomogeneous equations; series solutions, Bessel and Legendre functions; boundary value problems, Fourier-Bessel series and separation of variables for partial differential equations; classification of partial differential equations; Laplace transform methods; calculus of variations; introduction to finite-difference methods.

CHE 620 Chemical Engineering Thermodynamics Close Chemical Engineering Thermodynamics  This course supplements the clasical undergraduate   thermodynamics course by focusing on physical and thermodynamic properties, and   phase equilibria.  A variety of equations of state, and their applicability,   are introduced as are all of the important liquid activity coefficient   equations.  Customization of both vapor and liquid equations is introduced by   appropriate methods of applied mathematics.  Vapot-liquid, liquid-liquid,   vapor-liquid-liquid and solid-liquid equilibria are considered with rigor.   Industrial applications are employed.  A variety of methods for estimating   physical and thermodynamic properties are introduced.  Students are encouraged to use   commercial software in applications.  The course concludes with an   introduction to statistical thermodynamics.

CHE 630 Theory of Transport Processes Close Theory of Transport Processes Generalized approach to differential and macroscopic balances: constitutive material equations; momentum and energy transport in laminar and turbulent flow; interphase and intraphase transport; dimensionless correlations

CHE 670 Polymer Properties and Structure Close Polymer Properties and Structure Stress-strain relationships, theory of linear viscoelasticity and relaxation spectra, temperature dependence of viscoelastic behavior, dielectric properties, dynamic mechanical and electrical testing, molecular theories of flexible chains, statistical mechanics and thermodynamics of rubber-like undiluted systems, morphology of high polymers.

CHE 671 Polymer Rheology Close Polymer Rheology Molecular and continuum mechanical constitutive equations for viscoelastic fluids; analysis of viscometric experiments to evaluate the viscosity and normal stress functions: dependence of these functions on the macromolecular structure of polymer melts: solution of isothermal and nonisothermal flow problems with non-Newtonian fluids which are encountered in polymer processing; development of design equations for extruder dies and molds.

CHE 672 Processing of Polymers for Biomedical Applications Close Processing of Polymers for Biomedical Applications Descriptions of various polymer processing operations and processing requirements of biomedical products, principles of processing of polymers covering melting, pressurization, mixing, devolatilization, shaping using extrusion, spinning, blowing, coating, calendering and molding technologies, surface treatment and sterilization, applications in the areas of prostheses and artificial organs and packaging of various biomedical devices.

Chemical Engineer Program
The Degree of Chemical Engineer designates completion of a program of studies at the graduate level beyond the master's degree in scope, but with an overall objective. Students will be required to apply the subject matter acquired in formal graduate courses to a problem more consistent with one they are likely to encounter as a practicing engineer. Work on this problem in the form of an independent project will constitute a substantial part of the overall program of study. Specifically, it may be a design project, a process evaluation or an engineering feasibility study involving economic, social and managerial aspects.

Entrance requirements include a master’s degree in chemical engineering (or equivalent) and one year of industrial experience. This is to be satisfied either before entering the program or during the course of the program.

The credit requirements are 30 credits beyond the master’s degree in a program approved by your advisory committee (three faculty members, preferably including one member not in the department, assigned to you at the time of acceptance into the program). Of the 30 credits, a minimum of 8 and maximum of 15 credits will be given for the independent project.

In addition, on being accepted into the program, you will be expected to complete a set of placement examinations in chemical engineering for the purpose of constructing a suitable course of study. Your independent project must be approved by the advisory committee, defended publicly, bound according to specifications governing theses and placed in the library. A time limit of six years is set for completion of the program.

Doctoral Program
Admission to the Chemical Engineering doctoral program is based on evidence that a student will prove capable of scholarly specialization in a broad intellectual foundation of related discipline. The master’s degree is strongly recommended for students entering the doctoral program. Applicants without the master’s degree will normally be enrolled in the master’s program.

Ninety credits of graduate work in an approved program of study are required beyond the bachelor’s degree; this may include up to 30 credits obtained in a master’s degree program, if the area of the master's degree is relevant to the doctoral program. Core courses for the Ph.D. degree are the same as for the master’s degree for Chemical and Materials Engineering programs. BME Ph.D. program requires additional core courses as outlined in the following section. A doctoral dissertation for a minimum of 30 credits and based on the results of your original research, carried out under the guidance of a faculty member and defended in a public examination, is a major component of the doctoral program. The Ph.D. qualifying exam consists of an oral exam only for all three programs. Students are strongly encouraged to take the qualifying exam within two semesters of enrollment in the graduate program. A minimum of 3.3 GPA must be satisfied in order to take the exam. A time limit of six years is set for completion of the doctoral program.

Admission Requirements
Applications for admission from qualified students are accepted at any time. A bachelor's degree in Chemical Engineering with a "B" average from an accredited college or university is generally required. GRE scores are required for all international students and for financial aid. International students must demonstrate their proficiency in the English language prior to admission.

Admission to the doctoral program in Chemical Engineering is based on evidence that the applicant will prove capable of scholarly specialization on a broad intellectual foundation of Chemical Engineering. A doctoral dissertation based on the results of the student's original research, carried out under the guidance of an Advisory Committee and defended in a public examination, is a major component of the doctoral program.

Research
Active research programs in well-equipped laboratories include polymer processing and characterization, microchemical systems, biochemical engineering, chemical vapor deposition, crystallization, and reaction engineering.

The Chemical, Biochemical and Materials Engineering Department also houses the Highly Filled Materials Institute (HFMI), which incorporates one of the best funded academic research programs in the country. The HFMI investigates the behavior, goodness of mixing, processability and ultimate properties of highly filled materials including suspensions and dispersions. Highly filled materials are encountered in solid rocket fuels and explosives, detergents, food products, batteries, polymeric master batches and compounds, and ceramics.

Certificate Programs
In addition to the degree programs, the department offers Graduate Certificate Programs. In most cases, the courses may be used toward the master's degree. Each Graduate Certificate Program is a focused collection of three or more courses. The selection of courses is adapted to the professional interests of the student.

Financial Aid
Financial aid in the form of teaching assistantships, research assistantships and other types of fellowships are available on a highly competitive basis. For a successful candidacy, evidence of strong academic achievements in undergraduate or graduate preparation must be presented. All international students applying for financial support are required to take the GRE. For information contact Professor S. Kovenklioglu

Electives
Microprocesses in Process Control
Process Synthesis, Analysis and Design
Stagewise Operations
Design of Control Systems
Colloid and Surface Chemistry
Environmental Catalysis
Advanced Process Control
Chemical Process Simulation
Biochemical Engineering
Polymer Courses (see under Polymer Engineering)

Noncredit Introductory Courses
Mass and Energy Balances
Transport Phenomena
Reactor Design

Biochemical Engineering
Biochemical engineering is chemical engineering concentrating on biological processes. The core courses and many electives are the same as those of Chemical Engineering. In addition the following courses taught by the Chemistry and Chemical Biochemical Department are recommended: Biophysical Chemistry Cellular Metabolism and Regulation Biomolecular Structure and Function Methods in Chemical Biology

Polymer Engineering
Graduate studies in polymer engineering can be pursued in two directions. The student wishing to acquire advanced knowledge in the processing of polymers obtains a Chemical Engineering degree with concentration in polymers. A student with a Materials background and wishing to concentrate on the properties and application of polymers obtains a Materials Engineering degree with concentration in Polymers. Core and elective courses in chemical engineering are listed below.

Core Courses
Polymer Properties and Structure
Polymer Rheology
Polymer Processing

Electives
Polymer Mold and Die Design
Polymer Product Design