|
|
 |
|
|
|
|
| back |
| Dr. Kishore Pochiraju | |  |
Personal Webpage
| | Dr. Kishore Pochiraju | | Associate Professor & Director of the Design and Manufacturing Institute | | Location: | 3rd Floor Carnegie |
| | | |
| Close
ME 322:Engineering Design VI
This course is intended to teach modern systematic design techniques used in the practice of mechanical engineering. Methodology for the development of design objective(s), literature surveys, base case designs, and design alternatives are given. Economic analyses with an emphasis on capital investment and operating costs are introduced. Integrated product and process design concepts are emphasized with case studies. Students are encouraged to select their senior capstone design project near the end of the course, form teams, and commence preliminary work. A number of design projects are required of all students. |
|
Close
ME 345:Modeling and Simulation
Modeling and simulation methodologies including model-block building, logical and data modeling, validation, simulation and trade-off analysis, decision-making, and optimization. Product and assembly modeling; visual simulation; process modeling; production modeling; process plans and resource modeling, entity flow modeling including conveyors, transporters, and guided vehicles; Input and output statistical analysis. Several CAD/CAE simulation software are used. |
|
Close
ME 471:Mechanics of Materials
Multidimensional stress, strain and transformation equations, yield conditions and theories of failure, constitutive laws including linear elasticity, viscoelasticity and temperature influences, equations of elasticity, simple applications to uniaxial stress and symmetric bending, unsymmetrical bending and shear center of beams, torsions, combined stresses with applications to beams, thin-walled cylinders and pressure tanks, shrink fits, bending beyond the elastic limit, instability and energy methods. |
|
Close
ME 520:Analysis and Design of Composites
Composite material characterization; composite mechanics of plates, panels, beams, columns, and rods integrated with design procedures; analysis and design of composite structures, joining methods and procedures, introduction to manufacturing processes of filament winding, braiding, injection, compression and resin transfer molding, machining and drilling, and industrial applications. |
|
Close
ME 554:Introduction to Computer-Aided Design
An introduction to using a computer system to aid in engineering design, fundamental components of hardware and software; databases and database management, numerical control and computer-aided manufacturing. Integration of manufacturing system from conceptual design through quality control to final shipping is discussed. Applications include solids modeling, CAD drawing and solution using finite element method. |
|
Close
ME 566:Design for Manufacturability
This course is involved in the design and development of parts and assemblies for manufacturability and functionality; characteristics and capabilities of significant manufacturing processes; principles of design for manufacturability; product planning; conceptual design; embodiment design; dimensional tolerances; optimum design of products to minimize cost of manufacture; materials specifications for ease of manufacturability and good functional results; design for ease of assembly; integrated product development; concurrent engineering practice. |
|
Close
ME 663:Finite-Element Methods
Development of the fundamental equations of finite-element theory, using the matrix displacement approach. Detailed case studies of one-dimensional (truss and beam), two-dimensional (plane stress/strain and axisymmetric solid), k and plate-bending elements are explained. Applications include interactive model building and solutions. |
|
Close
IPD 611:Simulation and Modeling
This course emphasizes the development of modeling and simulation concepts and analysis skills necessary to design, program, implement and use computers to solve complex systems/products analysis problems. The key emphasis is on problem formulation, model building, data analysis, solution techniques and evaluation of alternative designs/processes in complex systems/products. Overview of modeling techniques and methods used in decision analysis, including multi-attribute utility models, decision trees, and optimization methods are discussed. |
|
Close
ME 635:Simulation and Modeling
This course emphasizes the development of modeling and simulation concepts and analysis skills necessary to design, program, implement and use computers to solve complex systems/products analysis problems. The key emphasis is on problem formulation, model building, data analysis, solution techniques and evaluation of alternative designs/processes in complex systems/products. Overview of modeling techniques and methods used in decision analysis, including multi-attribute utility models, decision trees and optimization methods are discussed. |
|
Close
ME 664:Special Topics in Applied Finite-Element Methods
This course covers the development and application of
finite-element theory to (1) fluid structure interaction, (2) large deformations of incompressible material, (3) electromechanical coupling problems, and (4) nonlinear heat transfer with phase change.
|
|
Close
E 120:Engineering Graphics
Engineering graphics: principles of orthographic and auxiliary projections, pictorial presentation of engineering designs, dimensioning and tolerance, sectional and detail views, assembly drawings. Descriptive geometry. Engineering figures and graphs. Solid modeling introduction to computer-aided design and manufacturing (CAD/CAM) using numerically-controlled (NC) machines. |
|
Close
ME 624:Intelligent Mechatronic Systems
This course spans the background, fundamental principles and elements of hardware/software required for design and prototyping intelligent mechatronic systems and fundamentals for developing knowledge-bases, tools and methods that contribute to the intelligent response of system to expected and unexpected stimuli. The course introduces hardware and software development system architectures, interfacing to the analog world with sensors, response synthesis and actuation. Model-based, learning-based and knowledge-based algorithms that enable intelligent response synthesis by the system will be studied. Prerequisite: ME522 Mechatronics I (Preferred but not Required). |
|
|
| | School: Schaefer School of Engineering & Science | | Department: Mechanical Engineering | Program: Mechanical Engineering / Integrated Product Development
| Research Center: Design and Manufacturing Institute
|
|
|
| | Research & Education | |
| | Education | - Bachelor of Engineering, Mechanical Engineering, National Institute of Technology, Warangal (Previously known as Regional Engineering College), 1986
- Master of Engineering, Mechanical Engineering, Indian Inst. of Technology, Kanpur, 1988
- Ph.D., Mechanical Engineering, Drexel University, 1993
|
| | | Research | - Multi-Scale Simulation of Performance and Durability of High Temperature Polymeric Composites and Structures
- Real-Time Autonomous or Remotely Operated Robotic Systems
- Product Design and Manufacturing Process Sciences
|
| |
| | Experience & Service | |
| | Experience | | Industrial Experience: - Programmer Analyst-II, Tata Engineering, Jamshedpur, India, 1988
- Engineer Trainee, Ind-Suzuki, Bangalore, India, 1986
Academic Experience : - Postdoctoral Fellow, Center for Composite Materials, University of Delaware, Newark DE, 1993- 1995
- Research Associate, Design and Manufacturing Institute, Stevens Institute of Technology, 1995-1997
| | Professional Service | - Reviewer for:ASME, Heat Transfer Conferences; Composites Science and Technology; Journal of Thermoplastic Composites; Journal of Polymer Composites
- Member of ASME Committee on Advanced Materials and Processing
- Member ASME Committee on Computing in Applied Mechanics (CONCAM)
- Organized ASME Regional Student Conference at Stevens Institute of Technology, 2002
- Co-Chair (1996-1998) ASME Trenton Section
|
| | | Institutional Service | - Member, Departmental Graduate Curriculum Committee, 2007- present
- Member, Graduate Curriculum Committee, 2005-2006
|
| |
| | Achievements & Professional Societies | |
| | Patents & Inventions | | Zhu, Z., Cui, H., Pochiraju, K. Flexible parallel manipulator for nano-, meso-or macro-positioning with multi-degrees of freedom WO06107664 (2006). | | Honors & Awards | | Harvey N. Davis Distinguished Teaching Assistant Professor award, 1999.
|
| | | Professional Societies | - Member, American Society of Mechanical Engineers (ASME)
- Member, American Society for Composites
- Member, American Soceity for Engineering Education (ASEE)
- Member, Institute of Electrical and Electronics Engineers (IEEE)
|
| |
| | Selected Publications | |
| Journals
G. Tandon K. Pochiraju and G. Schoeppner. (2008). "Thermo-oxidative Behavior of High Temperature PMR-15 Resin and Composites", Materials Science and Engineering, Part-A, 498 (1-2), 150-161.
Y. Yu and K. Pochiraju. (Dec 2008). "Modeling Long-Term Degradation due to Moisture and Oxygen in Polymeric Matrix Composites", Materials Science and Engineering, Part-A, 498 (1-2), 162-165.
K. Pochiraju, G. P. Tandon, G. (Nov 2008). "Evolution of stress and deformations in high-temperature polymer matrix composites during thermo-oxidative aging", J. Mechanics of Time-Dependent Materials, 12 (1), 45-68.
K. H. Ko, K. Pochiraju and S. Manoochehri. (2007). "An Embedded System for Knowledge-Based Cost Evaluation of Molded Parts", J. of Knowledge-Based Systems, 20 (3), 291-299.
K. H. Ko, K Pochiraju and S Manoochehri. (2007). "Dynamic Evolution of Information Complexity for Analysis of Design and Development", JSME J. of Advanced Mechanical Design, Systems and Manufacturing, 1 (1), 36-47.
Y. Yu and K. Pochiraju. (2007). "Characterization of temperature-dependent moisture diffusivity in PMR-15 resin", J. of Applied Polymer Science, 106 (2), 1281-1290.
K. H. Ko, K Pochiraju and S. Manoochechri. (Mar 2007). "An Embedded System for Knowledge-Based Cost Evalutaion of Molded Parts", Journal of Knowledge-Based Systems, 20 (3), pp 291-299.
KH Ko, K Pochiraju and S Manoochehri. (2007). "Dynamic Evolution of Information Complexity for Analysis of Design and Development", JSME Journal of Advanced Mechanical Design, 1 (1), pp:36-47.
K. V. Pochiraju and G. P. Tandon. (Apr 2005). "Extraction of Singular Stress Fields Using the Axisymmetric Single-Fiber Micromechanics Model", International Journal of Fracture. 132 pp: 329-349.
Kee Park, K. Pochiraju, C. Chassapis, S. Manoochehri, D. Newport. (2002). "Knowledge-based rapid design evaluation methodology for die-cast components", Concurrent Engineering and Research Applications Journal.. 10 (1), 67-74.
K. Pochiraju, G. P. Tandon, and N. J. Pagano. (2001). "Analyses of Single Fiber Pushout Considering Interfacial Friction and Adhesion", Journal of Mechanics and Physics of Solids.. (49), 2307-2338.
Pochiraju, K., and T-W. Chou.. (1999). "Three-dimensionally woven and braided composites- II: An Experimental Characterization", Polymer Composites.. 20 (6), 733-747.
Pochiraju, K., and T-W. Chou. (1999). "Three-dimensionally woven and braided composites- I: A model for anisotropic stiffness prediction", Polymer Composites. 20 (4), 565-580.
L. Q. Tang, K. Pochiraju, C. Chassapis, S. Manoochehri.. (Mar 1998). "A Computer-Aided Optimization Approach for the Design of Injection Mold Cooling Systems", Journal of Mechanical Design, Transactions of ASME.. 120 165-174.
|
|
| |
|
|
|
|
|
|
|
