Personal Webpage
| | Dr. Dilhan M. Kalyon | | Institute Professor & Director of Highly Filled Materials Institute | | Founding Director of Highly Filled Materials Institute | | Location: | 401 McLean Building | | Phone: | 201.216.8225 | | Email: | dkalyon@stevens.edu |
| Close
CHE 345:Process Control, Modeling and Simulation
Development of deterministic and non-deterministic modelsfor physical systems, engineering applications, and simulation tools for case studies and projects. |
|
Close
CHE 670:Polymer Properties and Structure
Stress-strain relationships, theory of linear viscoelasticity and relaxation spectra, temperature dependence of viscoelastic behavior, dielectric properties, dynamic mechanical and electrical testing, molecular theories of flexible chains, statistical mechanics and thermodynamics of rubber-like undiluted systems, morphology of high polymers. |
|
Close
CHE 671:Polymer Rheology
Molecular and continuum mechanical constitutive equations for viscoelastic fluids; analysis of viscometric experiments to evaluate the viscosity and normal stress functions: dependence of these functions on the macromolecular structure of polymer melts: solution of isothermal and nonisothermal flow problems with non-Newtonian fluids which are encountered in polymer processing; development of design equations for extruder dies and molds. |
|
Close
CHE 672:Processing of Polymers for Biomedical Applications
Descriptions of various polymer processing operations and processing requirements of biomedical products, principles of processing of polymers covering melting, pressurization, mixing, devolatilization, shaping using extrusion, spinning, blowing, coating, calendering and molding technologies, surface treatment and sterilization, applications in the areas of prostheses and artificial organs and packaging of various biomedical devices. |
|
Close
CHE 678:Experimental Methods in Polymer Melt Rheology
Discussion of models for flow and deformation in polymers, and a treatment of measurable rheological properties. Analysis of thermoplastic and thermosetting resins for processability. Use of experimental data to determine parameters of the constitutive equations. Laboratory includes use of state-of-art equipment in elongational, rotational, and capillary viscometry. |
|
Close
CHE 770-771:Selected Topics in Polymer Science and Engineering III-IV
A critical review of current theories and experimental aspects of polymer science and engineering.(Three to Six credits.) |
|
Close
CHE 682:Colloids and Interfacial Phenomena
A survey course covering the chemical, biological and material science aspects of interfacial phenomena. Applications to adhesion, biomembranes, colloidal stability, detergency, lubrication, coating, fibers, and powders - were surface properties play an important role. Prerequisites: Physical Chemistry and Thermodynamics. |
|
|
| | School: Schaefer School of Engineering & Science | | Department: Chemical Engineering & Materials Science | Program: Chemical Engineering
| Research Center: Highly Filled Materials Institute, HFMI
|
|
|
| | Research & Education |  |
| | Research | Professor Kalyon’s research focuses on precision structuring and processing/shaping of complex fluids including polymers and suspensions. The tools developed at Stevens for this purpose include new methods of rheological characterization, structural analysis and mathematical modeling in conjunction with novel sets of rheometers and continuous processing hardware. Interesting new capabilities include the recent developments of the hybrid twin screw extrusion and electrospinning and hybrid twin screw extrusion and spiral winding technologies to especially fabricate nanoparticle-incorporated nanofibers and functionally-graded extrudates, which serve as novel scaffolds in tissue engineering applications. |
| | | Education | - PhD : Chemical Engineering, McGill University (1980)
- MEng :Chemical Engineering, McGill University (1977)
- BEng : Chemical Engineering, Middle East Technical University, Ankara, Turkey (1975).
|
| |
| | Experience & Service | |
| | Experience | 1980-1984 Instructor at International Programs Office of Stevens Institute of Technology
1984-1987 Assistant Professor of Engineering Stevens Institute of Technology
1987-1990 Associate Professor of Engineering at Stevens Institute of Technology
1989- Director of Highly Filled Materials Institute
1990-1999 Professor of Engineering at Stevens Institute of Technology
1999- Institute Professor at Stevens Institute of Technology |
| | | General Information | Professor Kalyon has taught undergraduate and graduate courses in chemical and polymer engineering and has been investigating the rheology, processing, structure and ultimate properties of polymers and concentrated suspensions since 1980. He has been directing the Highly Filled Materials Institute since 1989. He has trained and collaborated with over 150 undergraduate and graduate students, post-doctoral and visiting scientists. |
| |
| | Achievements & Professional Societies | |
| | Patents & Inventions | Professor Kalyon and his co-workers have developed various comprehensive technologies in the areas of disposal of very toxic liquids, mitigation of EMF, mixing, on-line rheology and microstructural analysis of suspensions including their degree of mixedness, novel materials including processable magnetic composites with high relative permeability, materials and processes for on-site molding of replacements for cranial bones removed during neurosurgery, recycling and reuse of energetic materials, particle size distribution of crystalline solids using x-ray techniques, a safe disposal technique for medical waste and new methods for the fabrication of nanocomposites and novel scaffolds for use in the tissue engineering area. Some of these developments are patented, and some are being pursued by Stevens as new patents and opportunities for commercialization.
Patents and Disclosures:
1. D. Kalyon, J. Kowalczyk and H. Gevgilili, “Screw Extrusion Electrospinning Process (SEEP)”, invention disclosure submitted to Stevens Institute of Technology, September (2006).
2. S. Ozkan, D. Kalyon and X. Yu, “Apparatus and method to manufacture three-dimensional functionally-graded scaffolds for tissue engineering applications using extrusion and co-extrusion”, invention disclosure submitted to Stevens Institute of Technology, September (2006).
3. D. Kalyon, C. Erisken and H. Wang, “Apparatus and method to manufacture three dimensional functionally-graded scaffolds for tissue engineering applications using screw extrusion electrospinning process”, invention disclosure submitted to Stevens Institute of Technology, September (2006).
4. D. Fair, D. Kalyon, S. Moy and L. Manole, “Cross-sectional functionally-graded Propellants and Method of Manufacture”, US application filed on February 11, 2005 (application number 10/906274)
5. M. Wazne, D. Dermatas, D. Kalyon, X. Meng, M. Kauris and J. morris, "Method of Treatment, Stabilization, and Heave Control for Chromite Ore Processing Residues (COPR) and Chromium Contaminated Soils", US patent # 7,452, 163 issued on November 18, 2008.
6. R. Yazici and D. M. Kalyon, "Method and Apparatus for x-ray Analysis of Particle Size" U.S. Patent, #6,751,287 issued on June 15, 2004.
7. D. M. Kalyon and S. Kovenklioglu, "Disposal Method and Apparatus for Highly Toxic Chemicals by Chemical Neutralization and Encapsulation," U.S. Patent and Trademark Office; #5,584,071 issued on Dec. 10, 1996.
8. D. M. Kalyon, H. S. Gokturk, S. Railkar, "Electric Power Transmission System and Method of Asymmetric Transmission of Power to Mitigate Magnetic Fields," U.S. Patent and Trademark Office; # 5,391,929; issued on Feb. 21, 1995.
9. D. M. Kalyon, H. S. Gokturk, S. Railkar, "A Method and Apparatus for Mitigation of Magnetic Fields from Low Frequency Magnetic Field Sources," U.S. Patent and Trademark Office; # 5,365,115; issued on Nov. 15, 1994.
10. D. M. Kalyon, H. S. Gokturk, "Adjustable Gap Rheometer," U.S. Patent and Trademark Office; # 5,277,058; issued on Jan. 11, 1994.
11. D. Kalyon, “Method and Apparatus for the Manufacture of Food Products”, notice of invention submitted to Stevens May 21, 2004. (Two invention disclosures on materials and also method and apparatus aspects).
12. D. Kalyon, "Method for Continuous Sterilizing and Encapsulation of Medical Waste", notice of invention submitted to Stevens Institute of Technology (1998).
13. D.Kalyon, "Method and Apparatus for the Value-Enhanced Recycling of Energetic Materials", notice of invention submitted to Stevens Institute of Technology (1998). |
| | | Professional Societies | Fellow of the American institute of Chemical Engineers,
Fellow of the Society of Plastics Engineers,
Society of Rheology,
British Society of Rheology,
Polymer Processing Society,
American Institute of Physics,
Life Member of the National Defense Industrial Association,
American Society of Engineering Education,
Biomedical Engineering Society,
American Association for the Advancement of Science,NY Academy of Sciences | | Honors & Awards | Prof. Kalyon has received the Thomas Baron award in fluid-particle systems of American Institute of Chemical Engineers, AICHE, the International Research Award of Society of Plastics Engineers, SPE, and an honorary M. Eng. Degree from Stevens Institute of Technology. At Stevens he has received the Harvey N. Davis Distinguished Teaching Assistant Professor, the Henry Morton Distinguished Teaching Full Professor award and the Exemplary Research Award. His other awards include the Founder’s Award of Joint Ordnance Commanders Continuous Mixer and Extruder Users’ Group and the Outstanding Academic Achievement award of Quebec SPE. He has also received educational fellowships from Dupont, Exxon and Unilever. He was elected Fellow of American Institute of Chemical Engineering and Fellow of the Society of Plastics Engineers. |
| |
| | Selected Publications | |
| Journals
S. Ozkan, D. Kalyon and X. Yu. (2009). "Functionally graded -TCP/PCL nanocomposite scaffolds for bone tissue engineering: In vitro evaluation with human fetal osteoblast cells", Journal of Biomedical Materials Research A, doi: 10.1002/jbm.a.32425 .
S. Ozkan, D. M. Kalyon, X. Yu, C. McKelvey and M. Lowinger. (2009). "Multifunctional polycaprolactone (PCL) scaffolds integrated for controlled release and tissue engineering: In vitro evaluation of released protein secondary structure stability, release profile and biocompatibility", Biomaterials, doi:10:1016/j.biomaterials.2009.04.050 .
D. H. Moon, M. Wazne, A. Koutsospyros, C. Christoudoulatos, H. Gevgilili, M. Malik and D. M. Kalyon. (2009). "Evaluation of the treatment of chromite ore processing residue by ferrous sulfate and asphalt emulsion", Journal of Hazardous Materials, 166, 27-32.
G. Mago, F. T. Fisher and D. Kalyon. (2009). "Deformation-induced crystallization and associated morphology development of carbon nanotube-PVDF nanocomposites", Journal of Nanoscience and Nanotechnology, 9, 5, 3330-3340 .
N. Boz, N. Degirmenbasi and D. Kalyon. (2009). "Conversion of Biomass to fuel: Transesterification of vegetable oil to biodiesel using KF loaded nano-γ-Al2O3 as catalyst", Applied Catalysis B: Environmental, DOI:10.1016/J.APCATB.2009.01.026 .
G. Mago, F. T. Fisher and D. Kalyon. (2009). "Polymer crystallization and precipitation induced wrapping of carbon nanofibers with PBT", Journal of Applied Polymer Science, 114, 1312-1319.
H. S. Tang and D. M. Kalyon. (2008). "Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities", Journal of Rheology, 52, 5, 1069-1090.
C. Erisken, D. M. Kalyon and H. Wang. (2008). "Functionally and continuously graded electrospun polycaprolactone and β-tricalcium phosphate nanocomposites for interface tissue engineering applications", Biomaterials 29, 4065-4073.
G. Mago, F. T. Fisher and D. M. Kalyon. (2008). "Effects of multiwalled carbon nanotubes on the shear-induced crystallization behavior of poly (butylene terephthalate)", Macromolecules, 41 (21), 8103–8113, also on-line, DOI 10.1021/MA8008838.
C. Erisken, D. Kalyon and H. Wang. (2008). "A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibers", Nanotechnology, 19, 165302.
G. Mago, D. M. Kalyon and F. T. Fisher. (2008). "Membranes of Polyvinylidene fluoride (PVDF) and PVDF Nanocomposites with Carbon Nanotubes via Immersion Precipitation", Journal of Nanomaterials (special issue on Nanomechanics and Nanostructured Multifunctional Materials), 3, 759825, 8 pages.
N. Degirmenbasi, S. Ozkan, D. Kalyon and X. Yu. (2008). "Surface patterning of poly (L-lactide) upon melt processing: in vitro culturing of fibroblasts and osteoblasts on surfaces ranging from highly crystalline with spherulitic protrusions to amorphous with nanoscale indentations", Journal of Biomedical Materials Research A, 88A (1), 94-104 .
H. Gevgilili, D. Kalyon and A. Shah. (2008). "Processing of energetics in continuous shear roll mills", Journal of Energetic Materials, 26, 29-51.
H. Tang and D. M. Kalyon. (2008). "Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip", J. Rheology, 52, 2, 507-526.
C. Erisken, D. Kalyon and H. Wang. (Jul 2008). "Viscoelasticity of tissue constructs for cartilage-bone interface applications and comparisons with native bovine osteochondral tissue", submitted to Journal of Biomechanics.
D. M. Kalyon and H. Tang. (2007). "Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip", Journal of Non-Newtonian Fluid Mechanics, 143, 133-140.
D. Kalyon. (Dec 2008). "An analytical model for steady coextrusion of viscoplastic fluids in thin slit dies with wall slip", submitted to Polymer Engineering and Science.
S. Ozkan, H. Gevgilili, D.M. Kalyon, J. Kowalczyk, and Mark Mezger. (2007). "Twin screw extrusion of nano-alumina based simulants of energetic formulations involving gel based binders", Journal of Energetics Materials, 25, 3, 173-201.
D. M. Kalyon and M. Malik. (2007). "An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders", International Polymer Processing, 22, 293-302 .
E. Demirkol and D. M. Kalyon. (2007). "Batch and continuous processing of polymer layered organoclay nanocomposites", Journal of Applied Polymer Science, 104, 1391-1398.
M. Allende, D. Fair, D. M. Kalyon, D. Chiu and S. Moy. (2007). "Development of particle concentration distributions and burn rate gradients upon shear-induced particle migration during processing of energetic suspensions", Journal of Energetic Materials, 25, 49- 67.
J. E. Kowalczyk, M. Malik, D. M. Kalyon, H. Gevgilili, D. F. Fair, M. Mezger and M.. (2007). "Safety in Design and Manufacturing of Extruders used for the Continuous Processing of Energetic Formulations", Journal of Energetics Materials, 25, 247-271.
D. M. Kalyon, D. Dalwadi, M. Erol, E. Birinci and C. Tsenoglu. (2006). "Rheological Behavior of Concentrated Suspensions as affected by the Dynamics of the Mixing Process", Rheologica Acta, 45, 641-658.
N. Degirmenbasi, D. M. Kalyon and E. Birinci. (2006). "Biocomposites of Nanohydroxyapatite with Collagen and Poly(vinyl alcohol)", Colloids and Surfaces B Biointerfaces, 48, 42- 49.
E. Birinci and D. M. Kalyon. (2006). "Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles", J. Rheology, 50, 3, 313-326.
Z. Peralta-Inga, N. Degirmenbasi, U. Olgun, H. Gocmez and D. M. Kalyon. (2006). "Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part I, Mathematical Modeling using Molecular Dynamics Method", Journal of Energetic Materials, 24, 69-101.
N. Degirmenbasi, Z. Peralta-Inga, U. Olgun, H. Gocmez and D. M. Kalyon.. (2006). "Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part II, Experimental Studies", Journal of Energetic Materials, 24, 103- 139.
R. Schefflan, S. Kovenklioglu, D. Kalyon, M. Mezger and M. Leng. (2006). "Formation of aluminum nanoparticles upon condensation from vapor phase for energetic applications", Journal of Energetic Materials, 24, 141- 156.
R. Schefflan, S. Kovenklioglu, D. Kalyon, P. Redner and E. Heider. (2006). "Mathematical model for a fed-batch process for energetic crystals to achieve targeted size distributions", Journal of Energetic Materials, 24, 157- 172.
D. Kalyon, H. Gevgilili, J. Kowalczyk, S. Prickett and C. Murphy. (2006). "Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations", Journal of Energetic Materials, 24, 175-193.
D. Kalyon, H. Tang and B. Karuv. (2006). "Squeeze flow rheometry for rheological characterization of energetic formulations", Journal of Energetic Materials, 24, 195-202.
D. Kalyon. (2006). "An overview of the rheological behavior and characterization of energetic formulations: Ramifications on safety and product quality", Journal of Energetic Materials, 24, 213-245.
E. Birinci, H. Gevgilili, D. Kalyon, B. Greenberg, D. Fair and A. Perich. (2006). "Rheological characterization of nitrocellulose gels", Journal of Energetic Materials, 24, 247-269.
D. Kalyon. (2005). "Letter to the Editor: Comments on the use of rheometers with rough surfaces or surfaces with protrusions", J. Rheology, 49, 5, 1153-1155.
D. Kalyon. (2005). "Apparent Slip and Viscoplasticity of Concentrated Suspensions ", J. Rheology, 49, 3, 621-640.
R. Yazici and D. Kalyon. (2005). "Microstrain and defect analysis of CL-20 crystals by novel x-ray methods", Journal of Energetic Materials, 23, 43-58 .
M. Erol and D. Kalyon. (2005). "Assessment of the Degree of Mixedness of Filled Polymers: Effects of Processing Histories in Batch Mixer and Co-Rotating and Counter-rotating Twin Screw Extruders", International Polymer Processing, 20, 228-237 .
M. Malik and D. Kalyon. (2005). "Three-dimensional Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential Twin Screw Extruder and Die Combination ", Int. Polym. Processing, 20, 398- 409 .
U. Olgun and D. Kalyon. (2005). "Use of Molecular Dynamics to investigate polymer melt-metal wall interactions", Polymer, 46, 9423-9433 .
C. Feger, J. D. Gelorme, M. McGlashan-Powell and D. Kalyon. (2005). "Mixing, Rheology and Stability of Highly Filled Thermal Pastes", IBM Journal of Research and Development, 49, 4/5, 699-707.
D. Kalyon, H. Gevgilili and A. Shah. (2004). "Detachment of the polymer melt from the roll surface: data from a shear roll extruder", International Polymer Processing, 19, 2, 129-138.
H. Tang and D. Kalyon. (2004). "Estimation of the Parameters of Herschel-Bulkley Fluid under Wall Slip Using a Combination of Capillary and Squeeze Flow Viscometers", Rheologica Acta, 43, 1 80-88.
D. Kalyon, H. Gevgilili, R. Yazici, A. Post and G. McFann. (2004). "Flow and structure development behavior of bar soaps containing synthetic detergent", Rheologica Acta, 43, 396-405.
G. Lu, D. Kalyon, I. Yilgor and E. Yilgor. (2004). "Rheology and processing of BaSO4 filled medical-grade thermoplastic polyurethane", Polymer Engineering and Science, 44, 10, 1941-1948.
D. Kalyon. (2003). "Letter to the Editor: Comments on “A new method of processing capillary viscometry data in the presence of wall slip” [J. Rheol. 47, 337-348 (2003)] ", J. Rheology, 47, 4, 1087-1088.
B. L. Greenberg, D. M. Kalyon, M. Erol, M. Mezger, K. Lee and S. Lusk. (2003). "Analysis of Slurry-Coating Effectiveness of CL-20 using a Novel Grazing Incidence X-ray Diffraction Method ", Journal of Energetic Materials, 21, 1, 185.
D. Kalyon and H. Gevgilili. (2003). "Wall slip and extrudate distortion of three polymer melts", J. Rheology, 47, 3, 683-699.
D. Kalyon, G. Lu, I. Yilgor and E. Yilgor. (2003). "Rheology and Extrusion of Medical-grade Thermoplastic Polyurethane", Polymer and Engineering Science, 43, 12, 1863-1877.
A. Wagner, D. Kalyon, R. Yazici, and T. Fiske. (2003). "Uniaxial Extensional Flow Behavior of a Glass Fiber-Filled Engineering Plastic", Journal of Reinforced Plastics and Composites”, 22, 4, 327-337 .
Presentation/Meeting
G. Mago, C. Velasco-Santos, A. L. Martinez-Hernandez, D. M. Kalyon and F. F. Fisher. (2008). "Effect of functionalization on the crystallization behavior of MWNT-PBT nanocomposites", Material Research Society Symp. Proc. Vol. 1056, 1056-HH11-35.
G. Mago, J. A. Dutreuil, F.T. Fisher, and D.M. Kalyon. (2007). "Structural formation in poly (butylene terephthalate) and PBT nanocomposites during uniaxial deformation", Proceedings of the ASME International Mechanical Engineering Conference and Exposition (IMECE), November 11-15, Seattle, WA.
C. Feger, M. McGlashan-Powell, I. Nnebe, and D. M. Kalyon. (2006). "Rheology and stability of highly filled thermal pastes", Proceedings of the International Microelectronics and Packaging Society, Scottsdale, Arizona, March 23.
Mago, F.T. Fisher, and D.M. Kalyon. (2006). "Effect of shearing on the crystallization behavior of poly(butylene terephthalate) and PBT nanocomposites", Proceedings of ASME International Mechanical Engineering Conference and Exposition (IMECE), IMECE 2006-14585, November 5-10, Chicago, IL.
D. Kalyon, S. Prickett, R. Muscato, W. Newton and S. Murphy. (2004). "Processing of fast and Slow Burn Propellants using Co-extrusion Technologies", Proceedings of Joint Army, Navy, NASA and Air Force, Propellant Characterization Subcommittee Meeting (JANNAF), Chemical Propulsion Information Agency Publication May.
Kristin L. Jasinkiewicz, Timothy E. Dawag, Michael Fair, Roderick King, Dilhan Kalyon, Elvan Birinci and Halil Gevgilili. (2004). "Continuous Processing of Black Powder", Proceedings of AICHE Annual Meeting, Austin, Texas.
Suzanne Prickett, William Newton, Stuart Richman, Wayne Thomas, Christopher Gonzalez, Dilhan M. Kalyon, Halil Gevgilili, Moinuddin Malik Tugrulbey Kiryaman and James E. Kowalczyk. (2004). "Twin screw extrusion processing of double base rocket propellant", Proceedings of AICHE Annual Meeting, Austin, Texas.
Dilhan M. Kalyon. (2004). "Rheological characterization platforms for the extrudability and safety analysis of energetic materials ", Proceedings of AICHE Annual Meeting, Austin, Texas.
H. S. Tang and D. M. Kalyon. (2004). "Time-dependent development of flow instabilities of non-Newtonian melts and suspensions with rigid particles", Proceedings of AICHE Annual Meeting, Austin, Texas.
James E. Kowalczyk, James B. Graybill, Moinuddin Malik, Dilhan Kalyon, Halil Gevgilili, Mark Mezger and Brett Reddingius. (2004). "Novel Extrusion Platforms for the Continuous Processing of Energetics", Proceedings of AICHE Annual Meeting, Austin, Texas.
M. Malik, T. Kiryaman and D. Kalyon. (2004). "Mathematical modeling of the twin screw extrusion processing of energetic materials using tangential versus fully -intermeshing extruders", Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting.
D. Kalyon, D. Dalwadi, M. Erol, B. Greenberg and E. Birinci. (2004). "Rheological behavior of concentrated suspensions as affected by the degree of mixedness of their ingredients", Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting.
J. Kowalczyk, J. Graybill, B. Karuv, D. Kalyon, H. Gevgilili, M. Zghaibeh, S. Ozkan, M. Mezger and B. Reddingius. (2004). "Design and manufacture of the smallest twin screw extruder in the World for the processing of nanoparticles into nanoenergetics and nanocomposites", Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting.
D. Kalyon, H. Tang, E. Birinci and H. Gevgilili. (2004). "Predictions of the onset of the flow instabilities and gross surface irregularities of energetic grains during extrusion", Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting.
D. Kalyon, H. Gevgilili, E. Birinci, H. Tang, J. Kowalczyk and B. Karuv. (2004). "Novel rheological characterization platforms for the extrudability and safety analysis of energetic materials", Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting.
G. Lu, D.M. Kalyon, I. Yilgor and E. Yilgor. (2003). "Coextrusion of TPU and BaSO4 filled Medical-Grade TPU", Society of Plastics Engineers ANTEC Technical Papers, Volume 49.
G. Lu, D. Kalyon, I. Yilgor and E. Yilgor. (2003). "Extrusion of BaSO4 filled medical-grade thermoplastic polyurethane", Society of Plastics Engineers ANTEC Technical Papers, Volume 49.
D. Kalyon. (2003). "Twin screw extrusion of solid rocket fuels and propellants", Proceedings of Annual Meeting of American Institute of Chemical Engineers Annual Meeting.
D. Kalyon, E. Birinci and H. Gevgilili. (2003). "Development of extrudate distortions as affected by wall slip behavior of polymers and filled polymers", Proceedings of Annual Meeting of American Institute of Chemical Engineers Annual Meeting.
B. Greenberg, D. Kalyon, M. Erol, M. Mezger, P. Redner, K. Lee and S. Lusk. (2003). "Structural analysis of slurry coated CL-20 (PAX 12 granules) using a novel grazing incidence x-ray diffraction method", Proceedings of Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 26.
S. E. Prickett, C Murphy, W. Thomas and D. Kalyon. (2003). "Shear viscosity, extrudate swell and wall slip behavior of a double base propellant", Proceedings of Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 26.
Report
M. Erol and D. Kalyon. (2005). "Assessment of the Degree of Mixedness of Filled Polymers: Effects of Processing Histories in Batch Mixer and Co-Rotating and Counter-rotating Twin Screw Extruders", International Polymer Processing, 20 228-237.
H. S. Tang and D. Kalyon. (2004). "Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers", Rheologica Acta, 43 80-88. Download (702 kb PDF).
A. Ali, E. Walter, Y. Rahmi and D. Kalyon. (2004). "Crystal Habit Modification of Vitamin C (L-Ascorbic Acid) due to Solvent Effects", Turkish Journal of Chemistry, 28 255-270.
G. Halil, Y. Rahmi, P. Albert, M. Gregory and D. Kalyon. (2004). "Flow and Structure Development Behavior of Bar Soaps Containing Synthetic Detergent", Rheol Acta, 43 396-405. Download (634 kb PDF).
L. Guangyu, Y. Iskender, Y. Emel and D. Kalyon. (2004). "Rheology and Processing of BaSO4-Filled Medical-Grade Thermoplastic Polyurethane", Polymer Engineering and Science, 1941-48. Download (1.15 MB PDF).
G. Lu, I. Yilgor, E. Yilgor and D. Kalyon. (2003). "Co-extrusion of TPU and BaSO4 Filled Medical-Grade TPU", SPE ANTEC Technical Papers, 2557-2560. Download (220 KB PDF).
G. Lu, I. Yilgor, E. Yilgor and D. Kalyon. (2003). "Extrusion of BaSO4 Filled Medical-Grade Thermoplastic Polyurethane", SPE ANTEC Technical Papers, 273-277. Download (348 KB PDF).
G. Lu, I. Yilgor, E. Yilgor. (2003). "Rheology and Extrusion of Medical-Grade Thermoplastic Polyurethane", Polymer Engineering and Science, 43 1863-1877. Download (1.16 MB PDF).
H.Gevgilili and D. Kalyon. (2002). "Effect of Wall Slip of Polymer Melts on their Relaxation Modulus Behavior", Society of Plastics Engineers ANTEC Technical Papers, 1 1004-1007. Download (55.9 KB PDF).
H.Gevgilili and D. Kalyon. (2002). "Catastrophic Failure of the No-slip Condition at the Wall during Torsional Flows and Development of Gross Surface Irregularities during Capillary flow of three Polymers", Society of Plastics Engineers ANTEC Technical Papers, 1 1019-1023. Download (667 KB PDF).
E.Birinci and D. Kalyon. (2002). "Electrical Conductivity of a Graphite based Composite as affected by the degree of mixedness of Graphite in the Elastomeric Matrix", Society of Plastics Engineers ANTEC Technical Papers, 2 1716-1720. Download (151 KB PDF).
E.Birinci, R.Yazici, B.Karuv, S.Walsh and D. Kalyon. (2002). "Electrical Properties of Composites as Affected by the Degree of Mixedness of the Conductive Filler in the Polymer Matrix", Polymer Engineering & Science, 42 1609-1617. Download (81.3 KB PDF).
A. Lawal and D. Kalyon. (2000). "Compressive squeeze flow of generalized Newtonian Fluids with apparent wall slip", International Polymer Processing, 15 (1), 63-71. Download (726 KB PDF).
A. Lawal, R. Yazici, P. Yaras, S. Railkar and D. Kalyon. (1999). "Mathematical Modeling and Experimental Studies of Twin Screw Extrusion of Filled Polymers", Polymer and Engineering Science, 39 1139-1151. Download (362 KB PDF).
A. Lawal and D. Kalyon. (1999). "Squeeze flow rheometer", SPE ANTEC Technical Papers, 45 1120-1125. Download (228 KB PDF).
E. Kucukpinar, P. Tong and D. Kalyon. (1999). "Viscoelasticity of polyethylenes produced with single-site metallocene catalysis", SPE ANTEC Technical Papers, 45 1195-1200. Download (170 KB PDF).
A. Lawal, S. Railkar and D. Kalyon. (1999). "3-D analysis of fully flighted screws of co-rotating twin screw extruders", SPE ANTEC Technical Papers, 45 317-322. Download (1.68 MB PDF).
A. Lawal and D. Kalyon. (1999). "Analysis of non-isothermal screw extrusion processing of viscoplastic fluids with significant backflow", Chemical Engineering Science, 54 999-1013. Download (441 KB PDF).
R. Yazici, B. Karuv, E. Birinci and D. Kalyon. (1999). "Particulate based conductive composites exploiting percolation-range microstructure", SPE ANTEC Technical Papers, 45 1551-1555. Download (732 KB PDF).
M. Rege, S. Kovenklioglu, R. Yazici, E. Birinci and D. Kalyon. (1999). "Elastomeric coating of filler powders by slurry precipitation", SPE ANTEC Technical Papers, 45 3489-3494. Download (440 KB PDF).
M. Allende and D. Kalyon. (1999). "Assessment of particle migration effects in capillary rheometry of filled polymers", SPE ANTEC Technical Papers, 45 1130-1137. Download (155 KB PDF).
E.Birinci, R.Yazici, M.Michienzi, C.Murphy, R.Muscato and D. Kalyon. (1999). "Statistics of Mixing Distributions in Filled Elastomers Processed by Twin Screw Extrusion", SPE ANTEC Technical Papers, 45 Download (160 KB PDF).
A.Lawal, S.Railkar and D. Kalyon. (1999). "Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip", SPE ANTEC Technical Papers, 45 Download (333 KB PDF).
T. Fiske, H. S. Gokturk, R. Yazici and D. Kalyon. (1999). "Relative Magnetic Permeability of Injection Molded Composites as Affected from the Flow Induced Orientation of Ferromagnetic Particles", Imaging and Image Analysis Applications for Plastics, 135-143. Download (705 KB PDF).
A. Lawal and D. Kalyon. (1998). "Squeezing Flow of Viscoplastic Fluids Subject to Wallslip", Polymer Engineering and Science, 38 1793-1804. Download (260 KB PDF).
A. Lawal, S. Railkar and D. Kalyon. (1997). "A New Approach to Simulation of Die Flow which incorporates the Extruder and the Rotating Screw Tips in the Analysis", International Polymer Processing, 12 (2), 123-135. Download (11.2 MB PDF).
T. Fiske, H. S. Gokturk, R. Yazici and D. Kalyon. (1997). "Relative Magnetic Permeability of Injection Molded Composites as Affected from the Flow Induced Orientation of Ferromagnetic Particles", SPE ANTEC Technical Papers, 43 1482-1486. Download (527 KB PDF).
R. E. Kucukpinar and D. Kalyon. (1997). "Viscoelasticity and Processability of a BAMO/AMMO Thermoplastic Elastomer", SPE ANTEC Technical Papers, 43 3411-3417. Download (224 KB PDF).
A.H. Wagner, R. Yazici, T. J. Fiske and D. Kalyon. (1997). "Extensional Flow of Engineering Plastics with Glass Fibers", SPE ANTEC Technical Papers, 43 996-1000. Download (198 KB PDF).
R. Yazici and D. Kalyon. (1997). "Analysis of Degree of Mixing in Filled Polymers by Wide-Angle x-ray Diffraction", SPE ANTEC Technical Papers, 43 2076-2080. Download (175 KB PDF).
H. Gokturk, I. Boz and D. Kalyon. (1997). "An Adjustable Gap In-Line Rheometer", SPE ANTEC Technical Papers, 43 2283-2288. Download (188 KB PDF).
Z. Cao, S. Kovenklioglu, R. Yazici and D. Kalyon. (1997). "Dissolution Rates of Oxetane Thermoplastic Elastomer for Dissolution Based Recycling of Elastomeric Formulations", SPE ANTEC Technical Papers, 43 3104-3108. Download (135 KB PDF).
M. Akbulut, W. C. Ermler and D. Kalyon. (1997). "Ab Initio Cluster Model Study of Polymer-Metal Interactions", Computational and Theoretical Polymer Science, 7 (2), 75-80. Download (512 KB PDF).
A. Lawal and D. Kalyon. (1997). "Viscous Heating in Nonisothermal Die Flows of Viscoplastic Fluids with Wall Slip", Chemical Engineering Science, 52 (8), 1323-1337. Download (3.97 MB PDF).
Z. Cao, S. Kovenklioglu, R. Yazici and D. Kalyon. (1997). "Experimental Investigation and Modeling of Dissolution of Polymers and Filled Polymers", Polymer Engineering and Science, 90-100. Download (592 KB PDF).
T. Fiske, H. S. Gokturk, R. Yazici and D. Kalyon. (1997). "Effects of Flow Induced Orientation of Ferromagnetic Particles on Relative Magnetic Permeability of Injection Molded Composites", Polymer Engineering and Science, 37 826-837. Download (1.29 MB PDF).
T. Fiske, A. Wagner, R. Yazici and D. Kalyon. (1996). "Uniaxial Extensional Flow Behavior of Fiber Filled Suspensions as Affected by Fiber Aspect Ratio and Concentration", Society of Plastics Engineers ANTEC Technical Papers, 42 1134-1138. Download (1.90 MB PDF).
A. Wagner, V. Tan and D. Kalyon. (1996). "Microstructural Distributions in Extrusion Blow Molded Semicrystalline Resins", Society of Plastics Engineers ANTEC Technical Papers, Selected as the best paper of Blow Molding Division.. 42 7195-2199. Download (507 KB PDF).
R. Yazici, D. Fair and D. Kalyon. (Apr 1996). "Degree of Mixing Analysis in LOVA Propellants by Wide-Angle x-Ray Diffraction", US Army Report, ARPBM-CR-95001. 33.
A. Wagner and D. Kalyon. (1996). "Parison Formation and Inflation of Polyamides in Blow Molding", Society of Plastics Engineers ANTEC Technical Papers, 42 953-957. Download (291 KB PDF).
T. Fiske, H. Gokturk and D. Kalyon. (1996). "Relative Magnetic Permeability of Polymeric Composites with Hybrid Particulate Fillers", Society of Plastics Engineers ANTEC Technical Papers, 42 1768-1772. Download (1.31 MB PDF).
A. Lawal, S. Railkar and D. Kalyon. (1996). "Coupled Simulation of Die and Extrusion Flows Using Three-Dimensional Finite Element Method", Society of Plastics Engineers ANTEC Technical Papers, 42 155-159. Download (1.82 MB PDF).
A. Wagner and D. Kalyon. (1996). "Parison Formation and Inflation Behavior of Polyamide-6 During Extrusion Blow Molding", Polymer Engineering and Science, 36 (14), 1897-1906. Download (291 KB PDF).
A. Wagner, R. Yazici and D. Kalyon. (1996). "Extrudate Swell Behavior of a Fiber Filled Polyamide 6", Polymer Composites, 17 (6), 840-849. Download (4.26 MB PDF).
A. Lawal and D. Kalyon. (Aug 15, 1995). "Mechanisms of Mixing in Single and Co-rotating Twin Screw Extruders", Polymer Engineering and Science, 35 (17 Mid-September Issue), 1325-1338. Download (2.09 MB PDF).
B. Aral and D. Kalyon. (1995). "Rheology and Extrudability of Very Concentrated Suspensions: Effects of Vacuum Imposition", Plastics Rubber and Composites Processing and Applications, 24 201-210. Download (1.64 MB PDF).
H. Gokturk, P. Yaras, B. Aral and D. Kalyon. (1995). "Motion Analysis of Development of Wall Slip During Die Flow of Concentrated Suspensions", Society of Plastics Engineers ANTEC Technical Papers, 41 1130-1134. Download (483 KB PDF).
D. M. Kalyon. (1995). "A Report on Highly Filled Materials and the Activities of the Highly Filled Materials Institute at Stevens Institute of Technology", Bulletin of the British Society of Rheology, 38 (1), 12. Download (1.00 MB PDF).
S. Kovenklioglu and D. Kalyon. (Jun 5-6, 1995). "Disposal of Chemical Munitions using Concomitant Neutralization, Gelation and Encapsulation", Proceedings of the Symposium on Alternatives to Incineration for Disposal of Chemical Munitions and Energetics, Stevens Institute of Technology, Hoboken, NJ.
D. M. Kalyon. (1995). "Characterizing high-solid suspensions", ChemTech, 25 (5), 22-30. Download (3.05 MB PDF).
H.S. Gokturk, S. Railkar and D. Kalyon. (1995). "Electric Power Transmission System and Method of Asymmetric Transmission of Power to Mitigate Magnetic Fields", U.S. Patent and Trademark Office, U.S. Patent # 5,391,929. Download (1.10 MB PDF).
T. Fiske, S. Railkar and D. Kalyon. (1994). "Effects of Segregation on the Packing of Spherical and Non-Spherical Particles", Powder Technology, 81 57-64. Download (3.00 MB PDF).
R. Yazici, A. Wagner, S. B. Han and D. Kalyon. (1994). "Extrudate Swell Behavior of Engineering Plastics Reinforced with Glass Fibers", Society of Plastics Engineers ANTEC Technical Papers, 40 1172-1174. Download (1.87 MB PDF).
Y. N. Chiou, S. Kovenklioglu, A. Bouaffar and D. Kalyon. (1994). "High Pressure Polymerization of Ethylene and Rheological Behavior of Polyethylene Product", Polymer Engineering and Science, 34 (10), 804-814. Download (3.35 MB PDF).
P. Yaras, U. Yilmazer and D. Kalyon. (1994). "Flow Instabilities in Capillary Flow of Concentrated Suspensions", Rheologica Acta, 33 48-59. Download (4.55 MB PDF).
A. Lawal and D. Kalyon. (1994). "Non-isothermal Model of Single Screw Extrusion of Generalized Newtonian Fluids", Numerical Heat Transfer, 26 (1), 103-121. Download (4.81 MB PDF).
A. Lawal and D. Kalyon. (Aug 15, 1994). "Single Screw Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces", Polymer Engineering and Science, 34 (Mid-October Issue), 1471-1479. Download (1.48 MB PDF).
H.S. Gokturk and D. Kalyon. (1994). "A Method and Apparatus for Mitigation of Magnetic Fields from Frequency Magnetic Field Sources", U.S. Patent and Trademark Office, U.S Patent # 5,365,115 Download (768 KB PDF).
A. Lawal, Z. Ji. and D. Kalyon. (1993). "Computational Study of Chaotic Mixing in Co-Rotating Two-Tipped Kneading Paddles: Two-Dimensional Approach", Polymer Engineering and Science, 33 (3), 140-148. Download (1.07 MB PDF).
A. Lawal and D. Kalyon. (1993). "Three Dimensional Analysis of Co-rotating Twin Screw Extrusion Using Tools of Dynamics", Society of Plastics Engineers ANTEC Technical Papers, 39 3397-3400. Download (1.30 MB PDF).
H. Gokturk, T. Fiske and D. Kalyon. (1993). "Dielectric Properties of Polyethylene-Stainless Steel Fiber Composites", Society of Plastics Engineers ANTEC Technical Papers, 39 605-608. Download (1.26 MB PDF).
P. Yaras, U. Yilmazer and D. Kalyon. (1993). "Unstable Flow of Concentrated Suspensions in Tube Flow", Society of Plastics Engineers ANTEC Technical Papers, 39 2604-2606. Download (999 KB PDF).
A. H. Wagner and D. Kalyon. (1993). "Extrudate Swell, Rheological Behavior and Parison Formation of Blow Molding Grade Engineering Resins", Society of Plastics Engineers ANTEC Technical Papers, 39 1878-1884. Download (336 KB PDF).
T. Fiske, H. Gokturk and D. Kalyon. (1993). "Electric and Magnetic Properties of Low Density Polyethylene Filled with Ferromagnetic Powders", Society of Plastics Engineers ANTEC Technical Papers, 39 614-617. Download (307 KB PDF).
R. Yazici and D. Kalyon. (1993). "Degree of Mixing Analyses of Concentrated Suspensions by Electron Probe and X-Ray Diffraction", Rubber Chemistry and Technology, 66 (4), 527-537. Download (3.28 MB PDF).
H. Gokturk, T. Fiske and D. Kalyon. (1993). "Electric and Magnetic Properties of a Thermoplastic Elastomer Incorporated with Ferromagnetic Powders", IEEE Transactions on Magnetics, 29 (6), 4170-4176. Download (2.96 MB PDF).
A. Lawal and D. Kalyon. (1993). "Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces", Society of Plastics Engineers ANTEC Technical Papers, 39 2782-2785. Download (638 KB PDF).
R. Yazici and D. Kalyon. (1993). "Characterization of Degree of Mixing of Concentrated Suspensions", Society of Plastics Engineers ANTEC Technical Papers, 39 2845-2850. Download (3.44 MB PDF).
B. Aral and D. Kalyon. (1993). "Time-Dependent Development of Wall Slip in Shear Flows of Concentrated Suspensions", Society of Plastics Engineers ANTEC Technical Papers, 39 2607-2610. Download (1.45 MB PDF).
A. Lawal, U. Yilmazer and D. Kalyon. (1993). "Extrusion and Lubrication Flows of Viscoplastic Fluids with Wall Slip", Chemical Engineering Communications, 122 127-151. Download (1.82 MB PDF).
U. Yilmazer. (1992). "The Role of Interface at the Wall in Flow of Concentrated Composites", The Interfacial Interactions in Polymeric Composites, NATO Advanced Study Institute, G. Akovali, ed., Antalya, Turkey, Download (2.88 MB PDF).
H. Gokturk, T. Fiske.. (1992). "Electric and Magnetic Properties of Low Density Polyethylene Filled with Nickel Powders, Fibers, and Flakes", Society of Plastics Engineers ANTEC Technical Papers, 38 491-494. Download (1.04 MB PDF).
Z. Ji. (1992). "Two Dimensional Computational Study of Chaotic Mixing in Two-tipped Kneading Paddles of Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, 38 1323-1327. Download (3.47 MB PDF).
Y. Chen, E. Bayramli and D. Kalyon. (1992). "Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow: Effects of Materials of Construction and Surface Roughness", Society of Plastics Engineers ANTEC Technical Papers, 38 1747-1751. Download (1.54 MB PDF).
B. Aral, H. Gokturk and D. Kalyon. (1992). "The Effects of Air Incorporation in Concentrated Suspension Rheology", Society of Plastics Engineers ANTEC Technical Papers, 38 2448-2451. Download (598 KB PDF).
S. Railkar, H. Gokturk and D. Kalyon. (1992). "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields", Society of Plastics Engineers ANTEC Technical Papers, 38 488-490. Download (395 KB PDF).
A. Lawal and D. Kalyon. (1992). "A Non-isothermal Model of Single Screw Extrusion Processing of Viscoplastic Materials Subject to Wall Slip", Society of Plastics Engineers ANTEC Technical Papers, 38 2158-2161. Download (1.35 MB PDF).
J. Yu. (1991). "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part II", Polymer Engineering and Science, 31 (3), 153-160. Download (2.74 MB PDF).
J. S. Yu. (1991). "Microstructure Development in Blow Molded Amorphous Engineering Plastics", Plastics Rubber and Composites Processing and Applications, 15 95-101. Download (443 KB PDF).
U. Yilmazer. (1991). "Dilatancy of Concentrated Suspensions with Newtonian Matrices", Polymer Composites, 12 (4), 226-232. Download (2.30 MB PDF).
J. Yu, M. Lim. (1991). "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part I", Polymer Engineering and Science, 31 (3), 145-152. Download (2.46 MB PDF).
A. H. Wagner. (1991). "Development of Cracks in Injection Moldings of Poly(2,6-Dimethyl-1,4 Phenylene Ether)", Polymer Engineering and Science, 31 1393-1399. Download (2.38 MB PDF).
C. Jacob, P. Yaras. (1991). "An Experimental Study of the Degree of Fill and Melt Densification in Fully-intermeshing, Co-rotating Twin Screw Extruders", Plastics, Rubber and Composites Processing and Applications, 16 (3), 193-200. Download (2.91 MB PDF).
R. Yazici, C. Jacob, B. Aral, S. W. Sinton. (1991). "Effects of Air Entrainment on the Rheology of Concentrated Suspensions during Continuous Processing", Polymer Engineering and Science, 31 1386-1392. Download (1.14 MB PDF).
H.Yao, S.Kovenklioglu. (1991). "Conversion of Polymeric Precursors into Ceramics:Pore Formation", High performance composites for the 1990's, S.K.Das, C.P.Ballard, F.Marikar,eds TMS Publications, 377-387. Download (422 KB PDF).
D. M. Kalyon. (1991). "Polymer Processing", Enclycopedia of Chemical Processing and Design, Marcel Dekker, 39.
A. D. Gotsis, Z. Ji. (1990). "3-D Analysis of the Flow in Co-rotating Twin Screw Extruders", Society of Plastics Engineers, ANTEC Technical Papers, 36 139-142. Download (1.16 MB PDF).
A. H. Wagner. (1990). "Formation of Cracks in Injection Molded Amorphous Engineering Plastics", Society of Plastics Engineers, ANTEC Technical Papers, 36 1468-1472. Download (1.38 MB PDF).
J. W. Sinton, J. C. Crowley, G. A. Lo, C. Jacob. (1990). "Nuclear Magnetic Resonance Imaging Studies of Mixing in Twin Screw Extruders", Society of Plastics Engineers, ANTEC Technical Papers, 36 116-119. Download (1.32 MB PDF).
H. Yao, S. Kovenklioglu. (1990). "Pore Formation in the Pyrolysis of Polymers to Ceramics", Chemical Engineering Communications, 96 155-175. Download (2.06 MB PDF).
J. Yu. (1990). "Microstructure Development in Blow Molded Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, 36 768-772. Download (1.64 MB PDF).
Z. Ji, A. Gotsis. (1990). "Single Screw Extrusion Processing of Highly Filled Suspensions Including Wall Slip", Society of Plastics Engineers, ANTEC Technical Papers, 36 160-163. Download (230 KB PDF).
J. S. Yu, M. Lim. (1990). "Characterization and Simulation of Density Distributions in Injection Molded Amorphous Engineering Plastics", Society of Plastics Engineers, ANTEC Technical Papers, 36 313-317. Download (1.41 MB PDF).
H. Yao, H. Suwardie, S. Kovenklioglu. (1990). "Conversion of Poly(carbosilane) to Silicon Carbide: Thermal Characterization, Curing and Pore Formation", Society of Plastics Engineers, ANTEC Technical Papers, 36 538-541. Download (291 KB PDF).
B. Aral, U. Yilmazer. (1990). "Rheological Behavior of Highly Filled Suspensions", Society of Plastics Engineers, ANTEC Technical Papers, 36 1560-1564. Download (1.05 MB PDF).
D. Czerwonka and D. Kalyon. (1990). "Uniaxial Extensional Flow of Film Blowing Grade Polyethylenes in the Very Low to High Density Range", Plastics and Rubber Processing and Applications, 14 29-33. Download (351 KB PDF).
U.Yilmazer and D. Kalyon. (1990). "Rheological Behavior of Highly Filled Suspensions which Exhibit Slip at the Wall", Polymer Rheology and Processing, A.Collyer and L.Utracki,eds., Elsevier Applied Science, London, Download (1.44 MB PDF).
D. M. Kalyon, F. Moy. (1989). "Ultimate Properties of Blown Films of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers", Polymer Engineering and Science, 28 (23), 1551-1558. Download (870 KB PDF).
J. Yu, A. Wagner and D. Kalyon. (1989). "Simulation of Microstructure Development in Injection Molding of Amorphous Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, 35 281-285. Download (1.48 MB PDF).
U. Yilmazer, C. G. Gogos and D. Kalyon. (1989). "Unstable Flows During Compounding of Highly Filled Suspensions", Society of Plastics Engineers ANTEC Technical Papers, 35 191-195. Download (451 KB PDF).
H. Sangani and D. Kalyon. (1989). "Characterization of Distributive Mixing in Fully-Intermeshing, Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, 35 124-128. Download (1.54 MB PDF).
U. Yilmazer , C. Gogos and D. Kalyon. (1989). "Mat Formation and Unstable Flows of Highly Filled Suspensions in Capillaries and Continuous Processors", Polymer Composites, 10 (4), 242-248. Download (2.70 MB PDF).
U. Yilmazer and D. Kalyon. (1989). "Slip Effects in Viscometric Flows of Highly Filled Suspensions", Society of Plastics Engineers ANTEC Technical Papers, 35 1682-1686. Download (1.19 MB PDF).
A. Wagner, J. Yu and D. Kalyon. (1989). "Orientation and Residual Stress Distributions in Injection Molded Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, 35 303-307. Download (1.71 MB PDF).
A. Gotsis and D. Kalyon. (1989). "Simulation of Mixing in Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, 35 44-48. Download (1.40 MB PDF).
H. Sangani and D. Kalyon. (1989). "An Experimental Study of Distributive Mixing in Fully Intermeshing Co-rotating Twin Screw Extruders", Polymer Engineering and Science, 29 (15), 1018-1026. Download (3.84 MB PDF).
A. Wagner, J. Yu and D. Kalyon. (1989). "Injection Molding of Engineering Plastics", Advances in Polymer Technology, 9 (1), 17-32. Download (1.62 MB PDF).
D. Kalyon. (1989). "Applications of Continuous Mixers", Handbook of Polymer Science and Technology, N.P. Cheremisinoff,ed.,Marcel Dekker, 3 373-419. Download (3.22 MB PDF).
D. M. Kalyon, A. Wagner and S. Dey. (1988). "Microstructure Development in Injection Molded Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, 34 605-608. Download (219 KB PDF).
D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou. (1988). "Towards a Better Understanding of Mixing in Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, 34 64-66. Download (929 KB PDF).
A. Wagner, J. Yu and D. Kalyon. (1988). "Microstructure and Ultimate Properties of Injection Molded Amorphous Engineering Plastics: Poly(ether Imide) and Poly (2,6-Dimethyl-1,4-Phenylene Ether)", Polymer Engineering and Science, 29 (18), 1298-1307. Download (4.02 MB PDF).
D. Kalyon, F. Moy, V. Tan and S. Bhakhuni. (1986). "Microstructure Development in the Blown Film Extrusion of Linear Low Density Polyethylenes as Affected by Alpha Olefin Comonomers", Society of Plastics Engineers ANTEC Technical Papers, 32 741-744. Download (602 KB PDF).
D. M. Kalyon and F. Moy. (1985). "Blown Film Extrusion of Linear Low Density Polyethylenes: Effects of Alpha-Olefin Comonomers", Society of Plastics Engineers ANTEC Technical Papers, 31 680-684. Download (1.26 MB PDF).
D. Kalyon and M. Khemis. (1984). "Effects of Slip Additives on the Rheology of LDPE Resins and Ultimate Properties of Blown Films", Society of Plastics Engineers ANTEC Technical Papers, 30 136-140. Download (1.23 MB PDF).
D. Kalyon, M. Hallouch and N. Fares. (1984). "Recycling of Thermosets as Fillers", Society of Plastics Engineers ANTEC Technical Papers, 30 640-642. Download (530 KB PDF).
D. M. Kalyon and M. Bouazza. (1983). "Compounding Thermosetting Molding Powders in Continuous Kneaders", Society of Plastics Engineers ANTEC Technical Papers, 29 778-780. Download (363 KB PDF).
M. Kamal, D. M. Kalyon and V. Tan. (1981). "Distribution of Thickness and Properties in Blow Molded Polyethylene Bottles", Society of Plastics Engineers ANTEC Technical Papers, 26 434-435. Download (685 KB PDF).
D. M. Kalyon, V. Tan and M. Kamal. (1979). "Dynamics of Parison Development in Blow Molding", Society of Plastics Engineers ANTEC Technical Papers, 24 992-995. Download (0.98 MB PDF).
Conference Proceedings
C. Feger, M. McGlashan-Powell, I. Nnebe, and D. M. Kalyon. (Mar 23, 2006). "“Rheology and stability of highly filled thermal pastes”", Proceedings of the International Microelectronics and Packaging Society, Scottsdale, Arizona.
D. M. Kalyon. (1998). "Use of Simulation in Design and Optimization of continuous Processing of Energetic Materials", DMI/TACOM/TARDECConference Proceedings.
A. Lawal and D. Kalyon. (1992). "Incorporation of Wall Slip in Non-isothermal Modeling of Single Screw Extrusion Processing", Proceedings of the First International Conference on Transport Phenomena in Processing, S. Guceri, ed., Technomic Publ. Co., 985-996. Download (871 KB PDF).
|
|
| |
|
