Particle kinematics and kinetics, systems of particles, work-energy, impulse and momentum, rigid-body kinematics, relative motion, Coriolis acceleration, rigid-body kinetics, direct and oblique impact, eccentric impact.
Senior design courses. Complete design sequence with a required capstone project spanning two semesters. While the focus is on the capstone disciplinary design experience, it includes the two-credit core module on Engineering Economic Design (E 421) during the first semester.
Senior design courses. Complete design sequence with a required capstone project spanning two semesters. While the focus is on the capstone disciplinary design experience, it includes the two-credit core module on Engineering Economic Design (E 421) during the first semester.
Fundamental concepts of particle statics, equivalent force systems, equilibrium of rigid bodies, analysis of trusses and frames, forces in beam and machine parts, stress and strain, tension, shear and bending moment, flexure, combined loading, energy methods, statically indeterminate structures.
ME 573:Introduction to Microelectromechanical Systems
Introduction to microsystem design, modeling and fabrication. Course topics include material properties of Microelectromechanical systems (MEMS), microfabrication technologies, structural behavior, sensing and actuation principles and methods. Emphasis on microsystems design, modeling and simulation including lumped element modeling and finite element analysis. The emerging nano-materials, processes and devices will also be discussed. Student teams design microsystems (sensors, actuators and sensing/control systems) of a variety of types, (optical MEMS, bioMEMS, inertial sensors, etc.) to meet a set of performance specifications using a realistic microfabrication process.
Experiments in selected mechanical engineering systems areas, including principles and applications of experimentation, data-acquisition, design of experiments, and written and oral reporting on experimental hardware and results.
Research & Education
Education
Ph.D. in Aeronautics and Astronautics, Massachusetts Institute of Technology, 2004
M.S. in Aeronautics and Astronautics, Massachusetts Institute of Technology, 2001
B.Eng. in Composite Materials, National University of Defense Technology, P.R. China, 1985
Research
Active nanostructures such as nanofibers, nanotubes and nanojunctions
Mechanical, thermal, solar, and chemical energy scavenging
Novel actuation and sensing technologies for biomedical and structural health monitoring applications
Power, biomedical, RF and optical MEMS/NEMS design and fabrication
Experimental micro/nano mechanics and electromechanical coupling
Experience & Service
Experience
09/04 Assistant Professor, Department of Mechanical Engineering, Stevens Institute of Technology
1/97-08/98 Vice Director/Director of the composites department, Beijing spacecraft, P. R. China
03/96-12/96 Sinosat satellite platform coordinator, Aerospatial, Cannes, France
08/85-02/96 satellite engineer/director engineer, Beijing Spacecraft, P. R. China
Institutional Service
Member of Mechanical Engineering Undergraduate Committee
Member of Mechanical Engineering Graduate Committee
Member of Mechanical Engineering Laboratory Committee
Professional Service
Proposal Reviews
National Science Foundation, 2009
National Science Foundation, 2008
National Science Foundation, 2007
Basic Energy Sciences for the Department of Energy, 2007
National Science Foundation, 2006
Journal Reviews
Science, J. of Micromechanics and Microengineering, Nanotechnology, Smart Materials and Structures, Measurement Science and Technology, Composite Science and Technology
Conference/Symposium Organization
Symposium on Applied Mechanics, Friction and Tribology of MEMS/NEMS, The ASME 3rd International Conference on Micro-and Nanosystem, San Diego, CA, 2009
Symposium on Applied Mechanics, Friction and Tribology of MEMS/NEMS, The ASME 2nd International Conference on Micro-and Nanosystem, Brooklyn, NY, 2008
Faculty Workshops
ASME Nano Bootcamp, University of Minnesota, 2006
NSF Proposal Writing Workshop, George Washington University, 2006
Training on Proposal Writing, Rutgers University, 2007
Achievements & Professional Societies
Honors & Awards
Recipient of 2007 ANST fellowships
Best Young Researcher Award, Chinese Academy of Space Technology, P. R. China, 1993
R&D Award from the National Defense Science and Technology Committee, “Development of solar panel substrate and yoke for China-Bazil earth resources satellite,” P.R. China, 1998
Patents & Inventions
US-2009-0056094-A1, “Piezoelectric nanofibers, nanotubes, nanojunctions and nanotrees
Professional Societies
American Society of Mechanical Engineers (ASME)
IEEE Member
Materials Research Society (MRS) Member
Sigma Xi
Selected Publications
Journals
Xi Chen, Shiyou Xu, Nan Yao and Yong Shi. (2010). "1.6 V Nanogenerator for mechanical energy harvesting using PZT nanofibers", Nano Letters, 10 (6), 2133-2137.
Shiyou Xu, Yong Shi. (2009). "Gas sensing properties of indium tin oxide nanofibers", Sensors & Transducers Journal, 110 (11), 47-55.
Shiyou Xu, Yong Shi,. "Fabrication and Characterization of Nano AFC’s as Acoustic Emission Sensor", Materials Evaluation, 67 (10), 1189-1192.
Shiyou Xu, Yong Shi. (2009). "Low temperature high sensor response nano gas sensor using ITO nanofibers", Sensors and Actuators B: Chemical, 143 (1), 71-75.
Xi.Chen, S. Xu, N. Yao, W. Xu & Y. Shi. (2009). "Potential measurement from a single lead zirconate titanate nanofiber using a nanomanipulator", Applied Physics Letters, 94 253113.
S. Xu, Y. Shi. (2009). "Power generation from piezoelectric lead zirconate titanate nanotubes", J. of Physics D: Applied Physics, 42 (5pp), 085301.
V. R. Challa, M. G. Prasad, Y. Shi, F. T. Fisher. (2008). "A vibration energy harvesting device with bidirectional resonance frequency tenability", Smart Materials and Structures, 17 15-35.
S. Xu, Y. Shi, S.-G. Kim. (2006). "Fabrication and mechanical property of nano piezoelectric fibers", Nanotechnology, 17 4497-4501.
Sang-Gook Kim, Yong Shi, Yongbae Jeon. (Aug 2002). "Design of Micro-photonic Beam Steering Systems", 2002 CIRP Annal, Spain
.
Y. Shi, S. Kim. (2001). "Optical Crossconnect Technology Review", Report for Silicon Valley Group Corp.
.
Yong Shi, Yin L. (1996). "A New Low Viscosity Long Pot life Filament Winding Resin System", CAST Research Report.
Y. Shi. (1995). "Advancements in CFRP Satellite Antenna Reflectors in the world", CAST Research Report.
.
Y. Shi, Q., Tang. (1992). "Technologies of Composite Materials in Germany", CAST Research Report. 2.
Yong Shi. "The Development of the Carbon Fiber Reinforced Epoxy Stringer Pre-forms for the Central Tube of a Comsat", China Space Science and Technology. 6 (1992).
Sang-Gook Kim, Yong Shi. "A Self-alignment, Self-cleaning Long Lifecycle MEMS Switch", manuscript in preparation for IEEE Transaction on Journal of MEMS. .
Yong Shi, Nesbitt W. Hagood. "Theory and Experiments of Actuation Efficiency in Piezo-electrically driven linear and nonlinear systems", Manuscript in preparation for Smart materials and Structures.
.
Conference Proceedings
Jinwei Li, Shiyou Xu and Yong Shi,. "TiO2 Nanofibers based dye-sensitized solar cells", Proceedings of the ASME, 2009 International Mechanical Engineering Congress & Exposition, IMECE2009, November 13-19, Lake Buena Vista, Florida, USA.
Weihe Xu, Shiyou Xu, Dante Smiriglio, Yong Shi. "Fabrication and Characterization of Thermoelectric Oxide La1-xSrxCoO3 (x~0.05) Nanofibers", Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition
November 13-19, Lake Buena Vista, Florida, USA.
S. Xu, Y. Shi. (Jan 5-8, 2009). "High sensitivity, low operational temperature ITO nano gas sensor with integrated circuits", Proc. of the 4th International Conference on Nano/Micro Engineered and Molecular Systems, Shenzheng, China.
S. Xu, Y. Shi. (Oct 31, 2008). "Electromechanical coupling of PZT nanofibers", Proc. of IMECE200, 2008 ASME International Mechanical Engineering Congress and Exposition, Boston, MA.
X. Chen, Y. Shi, S. Mangla, M. Zhang. (Aug 3-6, 2008). "Modeling and simulation of a bio-mimetic MEMS actuator with self-sensing for thrombus retrieving", Proc. of the ASME 2008 International Design Engineering Technical Conferences, Computers and Information in Engineering Conference, Brooklyn, NY.
S. Xu, Y. Shi. (Nov 25-30, 2007). "Energy harvesting from PZT nanofibers", Proc. of the Materials Research Society, Symposium K: Ferroelectrics, Multiferroics, and Magnetoelectrics, Boston, MA.
S. Xu, Y. Shi. (Nov 11-15, 2007). "Fabrication of ITO nanofibers as gas sensor", Proc. of the 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, WA.
Shiyou Xu, Vinod Challa, Y. Shi. (Jan 10-13, 2007). "Characterization of piezoelectric response of PZT nanofibers", Proc. of the Micro Nano China 07, Sanya, Hainan, China.
S. Xu, Y. Shi. (Nov 1-3, 2006). "Piezoelectric nanofibers and their composites for micro/nano active structures", International Symposium on NanoManufacturing, MIT, Cambridge, MA.
Y. Shi, X. Zhang, S. Xu, S.-G. Kim. (Sep 20-22, 2006). "Fabrication and process characterization of piezoelectric nano fiber composites", Proc. of the ASME Multifunctional Nanocomposites International Conference, Honolulu, HI. .
S. Xu, Y. Shi. (Apr 17-21, 2006). "Synthesis and characterization of ITO nanofibers by electrospinning", Proc. of the Materials Research Society, Symposium R, San Francisco, CA. .
Y. Shi, S. Xu, S.-G. Kim, M.Libera. (Nov 28, 2005). "Structural characteristics and piezoelectric properties of electrospun piezoelectric nanofibers", Proc. of the MRS Fall Meeting, Symposium V, Boston, MA.
Y. Shi, S. Xu, S.-G. Kim. (Sep 14-16, 2005). "Partially aligned piezoelectric nanofibers by sol-gel electrospinning process", Proc. of Nano2005, Integrated Nanosystems: Design, Synthesis and Applications, Berkeley, CA.
Y. Shi, S.-G. Kim. (Sep 12-16, 2005). "Micro undulated contact surfaces on the contact behavior of a MEMS switch", Proc. of the Word Tribology Congress III, Washington, DC.
Y. Shi, S.-G. Kim. (Mar 28, 2005). "Critical process issues in the fabrication of a lateral self-cleaning MEMS switch", Proc. of the MRS Spring Meeting, Symposium J, San Francisco, CA.
Y. Shi, S.-G. Kim. (Jan 30, 2005). "A lateral, self-cleaning, direct contact MEMS switch", Proc. of the 18th IEEE International Conference on Micro Electro Mechanical Systems, Miami Beach, FL.
Yong Shi, Nesbitt W. Hagood. (Nov 2001). "Actuation Efficiency and Work Flow in Piezo-electrically Driven Systems", ASM/ASME, Adaptive Structures and Materials Systems, New York
.
Yong Shi. (1997). "The Structure Subsystem of a New Generation Communication Satellite", The Fifth annual Conference on Satellite Applications, Beijing, China
.
Yong Shi. (1994). "Filament Winding Technology of CFRP and Its Application in China’s Satellites", Chinese Technology Review Annual Conference, China
.
Yong Shi, Meng G.. (1993). "The Development of HS601 Solar Panel Coupons for Hughes", North China Technology Annual Conference, Beijing.
