VPN on Windows Vista - Split Tunneling

From ITwiki

(Difference between revisions)
Jump to: navigation, search
m (fix missing picture)
 
Line 62: Line 62:
Once the box pops up, click on '''Use preshared key for authentication" and type "SITvpn" for the key.  Click on '''Ok'''
Once the box pops up, click on '''Use preshared key for authentication" and type "SITvpn" for the key.  Click on '''Ok'''
-
{{Visual guide|img=VPN_Vista_ST_09.jpg}}
+
{{Visual guide|img=VPN_Vista_ST_09b.jpg}}
===Step 10: Change IPv4 Settings===
===Step 10: Change IPv4 Settings===

Latest revision as of 16:24, 12 July 2012

Campus Domain Account Required

A Campus Domain Account is required to access some services on this page. To change or reset your password, use the Stevens Password Service.

Graduate students do not have campus domain accounts created automatically and MUST REQUEST ONE.
The request must be COMPLETED before any system can be accessed with the account.

  • Username: username or campus\username where username is your Stevens username.
  • Password: The default password varies depending on your role and entry date at Stevens.
  1. Faculty & Staff: Passwords are randomly generated, please contact the HelpDesk.
  2. Students who entered before February 2009: The default password is StevensYYMMDD where YYMMDD corresponds to your date of birth.
  3. Students who entered after February 2009: The default password is Stevens000000 where 000000 corresponds to the last 6 digits of your Campus Wide ID Number.
  • Domain: If prompted for a Logon Domain, CAMPUS should be entered.

Contents

If you are trying to access the Library Databases do not use Split Tunneling

Who can use this?

You must have a Windows Campus domain login to use the VPN server.

Campus Domain Accounts for Graduate Students

Graduate students do not have Campus Domain Accounts created automatically and MUST REQUEST ONE.
The request must be COMPLETED before any system can be accessed with the account.

Only graduate students who are currently enrolled in a course are eligible for a campus domain account.

Configuration Instructions for Split Tunneling in Windows Vista

Step 1: Open Network and Sharing Center

Open the Network and Sharing Center in Control Panel. Click on “Set up a connection or network”.

Step 2: Connect to a Workplace

Choose to "Connect to a workplace" and click next

Step 3: "Use My Internet Connection"

Choose "Use my Internet connection (VPN)

Step 4: Type the Internet Address

For the Internet address type: vpn.stevens.edu For the Destination name type: Stevens VPN Split Tunnel Also, make sure to check the box next to Don't connect now; just set it up so I can connect later

Step 5: Type your user name and password

Type in your Campus Domain credentials and click create. You may choose to check the "Remember this password" box, but this is not recommended as anyone with access to the machine now has access to your Domain account.

Step 6: Click Close

Once it says The connection is ready to use, do not click on connect now, rather click on Close

Step 7: Open the Network and Sharing Center Again

Now that the connection has been created, we need to edit a few of the settings, so open the network and sharing center again and click on Manage network connections

Step 8: Select the Stevens VPN Split Tunnel

Right click on the connection Stevens VPN Split Tunnel and click on Properties

Step 9: Change IPsec Settings

On the Networking tab,

  • For the "Type of VPN:" Select "L2TP IPSec VPN" The screen shot below is not correct it should read "L2TP IPSec VPN" where it reads "Automatic".
  • click on the button for IPSec Settings

Once the box pops up, click on Use preshared key for authentication" and type "SITvpn" for the key. Click on Ok

Step 10: Change IPv4 Settings

Click on Internet Protocol Version 4 (TCP/IPv4) and then click on the button that says Properties

Once that box pops up, click on the Advanced button.

Under the IP Settings tab, uncheck the box next to Use Default gateway on remote network and click Ok

Step 11: Start the Connection

Double click on Stevens VPN Split Tunnel

Step 12: Enter your Campus Domain Credentials

Enter in your campus domain username and password in the boxes

Step 13: Select a location

Select a location for this network

Troubleshooting

If you are unable to connect, please check our VPN Troubleshooting tips.

Retrieved from "http://www.stevens.edu/itwiki/w/index.php/VPN_on_Windows_Vista_-_Split_Tunneling"
Personal tools