Babbio X10

From ITwiki

Revision as of 14:18, 23 February 2012

The following rooms in the Babbio Center have been fitted with additional hardware in order to allow for multi-projector display:

• BC 110
• BC 210
• BC 310

Projector Labeling

The projection system in the Babbio X10 classrooms has been relabeled to be less confusing. As such, each connection and projector has been labeled with A or B.

Wall connections can be seen here:

Each projector cage is now also labeled:

Standard Single Projector Display

The rooms are still capable of displaying two separate images through the use of two separate laptops.

In the case where you'd like to use a single projector, please follow the below:

1. Turn on Projector A or B
2. Plug the VGA cable for the respective projector you've turned on
3. On the Pixie Projector controller, select COMP for the projector you turned on
4. Your image should now be displayed

Dual Projector Display

In order to display a single image (from a single computer) to both projectors, please take the following steps:

1. Turn both projectors on
2. Plug in computer to cable for Projector A
3. Set the Pixie control for Projector A to COMP
4. Set the Pixie control for Projector B to COMP

NOTE: The Projector B COMP is programmed to Search for inputs, and as such must be set after Projector A is displaying an image.

For reference, please see the below image of the Pixie controller: